ELOG Forum

Demo Discussion

Forum Config Examples Contributions Vulnerabilities

Discussion forum about ELOG, Page 279 of 807

Not logged in

Find | Login | Help

Full | Summary | Threaded | Show attachments

6451 Entries

Goto page Previous 1, 2, 3 ... 278, 279, 280 ... 805, 806, 807 Next

Fri Mar 19 15:56:38 2010

Re: Fail to connect to SMTP server on WinXP but works on Win2K

soren poulsen wrote:

David Spindler wrote:

soren poulsen wrote:

David Spindler wrote:

Stefan Ritt wrote:

David Spindler wrote:

Fantastic. I forgot the icon and when I resent nothing was left.

Here goes again!

I have been running Elog for years on a Win2K machine with no email problems. I have been forced to move it to a WinXP machine and I always get this message under WinXP: "Error sending Email via "netsvr10.prod.company.com": Cannot connect to server"

I noticed this a long time ago but was not concerned until I wqas forced to use WinXP. We have years of data in the Elog and to lose the use of it would hinder our operation a lot.

Here is an entry from the elog.log file when it worked under Win2K:

28-Oct-2009 18:28:38 [609144@199.82.127.9] {Generals} NEW entry #0
28-Oct-2009 18:28:38 [609144@199.82.127.9] {Generals} Email from <christophermeyer@fedex.com> to david.spindler@company.com, SMTP host smtp.mail.company.com
28-Oct-2009 18:28:42 [609144@199.82.127.9] {Generals} 220 netsvr10.prod.company.com -- Server ESMTP (Sun Java(tm) System Messaging Server 6.3-8.01 (built Dec 16 2008; 32bit))

Here is an entry from today's elog.log under WinXP that does not work.

06-Mar-2010 11:48:23 [117361@127.0.0.1] {Gbld} NEW entry #0
06-Mar-2010 11:48:23 [117361@127.0.0.1] {Gbld} Email from <david.spindler@company.com> to david.spindler@company.com, SMTP host smtp.mail.company.com
06-Mar-2010 11:48:23 [117361@127.0.0.1] {Gbld} READ entry #1612

We use an SMTP server without authentication.

I picked a bad example with an IP address of 127.0.0.1, but it is the same as a valid IP address such as the working entries above or the entry below.

06-Mar-2010 10:31:43 [117361@199.81.166.149] {Gbld} READ entry #1691
06-Mar-2010 10:39:10 [117361@199.81.166.149] {Gbld} NEW entry #0
06-Mar-2010 10:39:11 [117361@199.81.166.149] {Gbld} Email from <david.spindler@company.com> to david.spindler@company.com, SMTP host smtp.mail.company.com

The only idea I have is that your Windows firewall prevents outgoing network traffic on port 25 (SMTP). You should put an exception into the firewall rule. You can try that by opening a DOS box and entering

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

I have tried setting up a VM (VMWare) with W2K and testing it out on both a W2K and WXP host. In both cases the Elog successfully sends emails. I don't know if this helps, or not.

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

My apologies. I just realized that my first answer to you was lost. I turned the firewall completely off with no luck. I also tried the telnet and it worked. So, it does not appear to be the firewall. I tried the VM's afterwards. Another puzzle is that the Win2K VM works on a WinXP host. It seems like it is only the WinXP elog that fails. I have tried to obtain some our company's IT help with no luck.

Just an idea: could you try specifying an IP address for your SMTP server instead of smtp.mail.company.com ?

I would also try to make a manual SMTP session to see if that works.

Otherwise, next step would be to create a VM installed with Wireshark to record the network traffic that ELOG generates when it makes the SMTP connection.

Soren

Thanks, I will give it a try.

I cannot send an email from elog using an IP address.

I can send an email manually through SMTP.

I will have to locate a copy of wireshark and set up a VM. I cannot access any site that has it from here.

We will get there. What is the output of "ipconfig /all" of the Win2K and WinXP machines respectively ?

Maxbe the DNS suffix is missing on XP ?

Soren

Here are the IPCONFIG /ALL pastes:

#1>>>WinXP not running VM:

ipconfig /all

Windows IP Configuration

        Host Name . . . . . . . . . . . . : AOC-117361-W1
        Primary Dns Suffix . . . . . . . : corp.ds.companyname.com
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : corp.ds.companyname.com
                                            ds.companyname.com
                                            companyname.com

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix . :
        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont
roller
        Physical Address. . . . . . . . . : 00-11-43-18-D3-7B
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : ##9.81.166.149
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : ##9.81.166.1
        DNS Servers . . . . . . . . . . . : ##9.81.11.53
                                            ##9.81.7.54

************************************************************************
#2>>>VM Win2K fail to send emails:
ipconfig /All

Windows 2000 IP Configuration

        Host Name . . . . . . . . . . . . : jc_vm_w2k
        Primary DNS Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Broadcast
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : corp.ds.companyname.com

Ethernet adapter Local Area Connection 2:

        Connection-specific DNS Suffix . : corp.ds.companyname.com
        Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter

        Physical Address. . . . . . . . . : 00-0C-29-28-24-8F
        DHCP Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : ##9.81.163.127
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : ##9.81.163.1
        DHCP Server . . . . . . . . . . . : ##6.18.71.214
        DNS Servers . . . . . . . . . . . : ##9.81.10.150
                                            ##6.18.71.3
                                            ##9.82.243.70
        Lease Obtained. . . . . . . . . . : Friday, March 19, 2010 8:24:21 AM
        Lease Expires . . . . . . . . . . : Friday, March 19, 2010 12:24:21 PM

*************************************************************************
#3>>>VM Win2K with successful emails:
C:\>ipconfig /all

Windows 2000 IP Configuration

        Host Name . . . . . . . . . . . . : win2k-vm
        Primary DNS Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Broadcast
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : corp.ds.companyname.com

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix . : corp.ds.companyname.com
        Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter

        Physical Address. . . . . . . . . : 00-0C-29-1A-40-F3
        DHCP Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : ##9.81.163.127
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : ##9.81.163.1
        DHCP Server . . . . . . . . . . . : ##6.18.71.214
        DNS Servers . . . . . . . . . . . : ##9.81.10.150
                                            ##6.18.71.3
                                            ##9.82.243.70
        Lease Obtained. . . . . . . . . . : Friday, March 19, 2010 8:32:26 AM
        Lease Expires . . . . . . . . . . : Friday, March 19, 2010 12:32:26 PM

#1 was the output from the WinXP PC running Elog with no successful emails.

#2 was the output from the Win2K VM running on the #1 PC, also with no successful emails.

#3 was the output from another Win2K VM running on the #1 PC that successfully emails.

The difference between the 2 VM's is that #2 has the latest VMWare tools installed and #3 does not. This is running under VMWare Player 3.

The DNS suffix is present on the host PC but neither of the VM's, yet one of the VM's works.

BTW, thanks for your time in examining this issue.

66774

Fri Mar 19 20:18:17 2010

Re: Fail to connect to SMTP server on WinXP but works on Win2K

David Spindler wrote:

soren poulsen wrote:

David Spindler wrote:

soren poulsen wrote:

David Spindler wrote:

Stefan Ritt wrote:

David Spindler wrote:

Fantastic. I forgot the icon and when I resent nothing was left.

Here goes again!

I noticed this a long time ago but was not concerned until I wqas forced to use WinXP. We have years of data in the Elog and to lose the use of it would hinder our operation a lot.

Here is an entry from the elog.log file when it worked under Win2K:

Here is an entry from today's elog.log under WinXP that does not work.

We use an SMTP server without authentication.

I picked a bad example with an IP address of 127.0.0.1, but it is the same as a valid IP address such as the working entries above or the entry below.

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

I have tried setting up a VM (VMWare) with W2K and testing it out on both a W2K and WXP host. In both cases the Elog successfully sends emails. I don't know if this helps, or not.

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

Just an idea: could you try specifying an IP address for your SMTP server instead of smtp.mail.company.com ?

I would also try to make a manual SMTP session to see if that works.

Otherwise, next step would be to create a VM installed with Wireshark to record the network traffic that ELOG generates when it makes the SMTP connection.

Soren

Thanks, I will give it a try.

I cannot send an email from elog using an IP address.

I can send an email manually through SMTP.

I will have to locate a copy of wireshark and set up a VM. I cannot access any site that has it from here.

We will get there. What is the output of "ipconfig /all" of the Win2K and WinXP machines respectively ?

Maxbe the DNS suffix is missing on XP ?

Soren

Here are the IPCONFIG /ALL pastes:

#1 was the output from the WinXP PC running Elog with no successful emails.

#2 was the output from the Win2K VM running on the #1 PC, also with no successful emails.

#3 was the output from another Win2K VM running on the #1 PC that successfully emails.

The difference between the 2 VM's is that #2 has the latest VMWare tools installed and #3 does not. This is running under VMWare Player 3.

The DNS suffix is present on the host PC but neither of the VM's, yet one of the VM's works.

BTW, thanks for your time in examining this issue.

BINGO!!

I found the trouble. I assumed it was WinXP but I did not notice that the Win2K PCs I used hadSymantec Corporate AV while the WinXP PCs had McAfee AV. McAfee was the culprit.

Thanks very much for all of your help!!!

66775

Fri Mar 19 20:26:44 2010

Re: Fail to connect to SMTP server on WinXP but works on Win2K

David Spindler wrote:

soren poulsen wrote:

David Spindler wrote:

soren poulsen wrote:

David Spindler wrote:

Stefan Ritt wrote:

David Spindler wrote:

Fantastic. I forgot the icon and when I resent nothing was left.

Here goes again!

I noticed this a long time ago but was not concerned until I wqas forced to use WinXP. We have years of data in the Elog and to lose the use of it would hinder our operation a lot.

Here is an entry from the elog.log file when it worked under Win2K:

Here is an entry from today's elog.log under WinXP that does not work.

We use an SMTP server without authentication.

I picked a bad example with an IP address of 127.0.0.1, but it is the same as a valid IP address such as the working entries above or the entry below.

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

I have tried setting up a VM (VMWare) with W2K and testing it out on both a W2K and WXP host. In both cases the Elog successfully sends emails. I don't know if this helps, or not.

telnet smtp.mail.company.com 25

if you see a reply, the traffic is allowed. If it blocks, the firewall prevents this kind of traffic.

Just an idea: could you try specifying an IP address for your SMTP server instead of smtp.mail.company.com ?

I would also try to make a manual SMTP session to see if that works.

Otherwise, next step would be to create a VM installed with Wireshark to record the network traffic that ELOG generates when it makes the SMTP connection.

Soren

Thanks, I will give it a try.

I cannot send an email from elog using an IP address.

I can send an email manually through SMTP.

I will have to locate a copy of wireshark and set up a VM. I cannot access any site that has it from here.

We will get there. What is the output of "ipconfig /all" of the Win2K and WinXP machines respectively ?

Maxbe the DNS suffix is missing on XP ?

Soren

Here are the IPCONFIG /ALL pastes:

#1 was the output from the WinXP PC running Elog with no successful emails.

#2 was the output from the Win2K VM running on the #1 PC, also with no successful emails.

#3 was the output from another Win2K VM running on the #1 PC that successfully emails.

The difference between the 2 VM's is that #2 has the latest VMWare tools installed and #3 does not. This is running under VMWare Player 3.

The DNS suffix is present on the host PC but neither of the VM's, yet one of the VM's works.

BTW, thanks for your time in examining this issue.

BINGO!!

I found the trouble. I assumed it was WinXP but I did not notice that the Win2K PCs I used hadSymantec Corporate AV while the WinXP PCs had McAfee AV. McAfee was the culprit.

Thanks very much for all of your help!!!

A little more info in case anybody else runs into this. McAfee defaults to blocking mass mailing worms, or at least our IT department has it doing so. Turn this off and the email from Elog works.

66776

Sun Mar 21 19:03:52 2010

Attach multiple (many!) files at one time

Hi,

Is it possible to attach multiple files at one time? Right now I have to attach each individually, click submit, then confirm, then re-select the next file...

This is a pain if one is attaching many files as I often want to do. It would be nice to be able to select groups of files together using Ctrl and/or Shift, and even to attach a whole directory recursively.

I looked through previous threads but did not find this question asked there.

Thanks,

Eric

66777

Mon Mar 22 08:58:47 2010

Re: Attach multiple (many!) files at one time

Eric Feng wrote:

Hi,

Is it possible to attach multiple files at one time? Right now I have to attach each individually, click submit, then confirm, then re-select the next file...

I looked through previous threads but did not find this question asked there.

Thanks,

Eric

This is a well known problem, but unfortunately it's a limitation of HTML and how web browsers work. If it would be easy to attach whole directories to HTML forms, it would be too easy to steal important files from your computer. So the HTML designers decided that each file hast to be confirmed manually, and that's why you have to click so often. There is no way ELOG could bypass this scheme.

66778

Mon Mar 29 06:05:08 2010

Active Directory authentication

Found a thread from 2004 ("External authentication") asking about the possibility of tying that in with ELog and answer was "Not yet". With time past, any chance this is now possible? I didn't see any more info on that since.

I'd like to explore using AD to set up/manage groups for ELog authentication. Alternatively, is there currently another way with ELog to manage groups?

Regards.

66780

Sun Apr 4 11:26:19 2010

siva kumar

sivakumarkp@fastmail.fm

Question

Windows

2.7.8

background color and font

Stefan,

i recently download the elog server for windows and configured. its working with me fine

i would like to configure my elog server for to display a different color when am giving a specific "value" for a attribute "Status".

from the documentation i found to use the

Style Status Fixed = background-color:green

but with this configuration, the entire raw will be with red color or the specified color. i am looking only for that specific box (Status column) to be with specific color.

my configuration is as follows

Attributes = Author, Type, Category, Subject, Location, Problem Description, Status

Options Status = Fixed, Under Process, Not Fixed

Style Status Fixed = background-color:green

Style Status Not Fixed = background-color:red

Style Status Under Process = background-color:yellow

Am attaching two images, one is current display and next one is what i am looking for

am not sure about will it possible or not. please guide me. if it possible with javascript please tell me how i can include a external javascript for this pupose.

Thanks in advance

siva

66781

Tue Apr 6 00:45:10 2010

Re: Attach multiple (many!) files at one time

Stefan Ritt wrote:

Eric Feng wrote:

Hi,

Is it possible to attach multiple files at one time? Right now I have to attach each individually, click submit, then confirm, then re-select the next file...

I looked through previous threads but did not find this question asked there.

Thanks,

Eric

Hi Stefan,

Okay thanks for letting me know. That is unfortunate now.

Is there no way also to select multiple files with shift or ctrl? Is there any usable workaround that you can see?

Thanks,

Eric

Goto page Previous 1, 2, 3 ... 278, 279, 280 ... 805, 806, 807 Next

ELOG V3.1.5-3fb85fa6