Images in notifications, posted by Patrick Sizun on Fri Feb 8 14:43:13 2019
|
Hello,
I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.
Is it expected?
For example, with an image file myimage.png the email source code contains <img alt="" height="150" src="190208_143305/myimage.png.png" width="200">
Maybe the email should make use of the Content-ID of the attached image? |
Re: Images in notifications, posted by Stefan Ritt on Fri Feb 8 14:57:05 2019
|
Your observation is correct. The mailer inside elog should scan all email bodies and replace all <img> tags correctly. I put that on my todo list.
Stefan
Patrick Sizun wrote: |
Hello,
I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.
Is it expected?
For example, with an image file myimage.png the email source code contains <img alt="" height="150" src="190208_143305/myimage.png.png" width="200">
Maybe the email should make use of the Content-ID of the attached image?
|
|
display GMT time instead of local time in Entry time/ Last edit field, posted by Dan Duong on Tue Jul 28 02:50:42 2009
|
Hi all,
I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.
I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.
Please help. Thank you very much.
|
Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Stefan Ritt on Tue Jul 28 11:04:01 2009
|
Dan Duong wrote: |
Hi all,
I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.
I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.
Please help. Thank you very much.
|
That's strange. I use the C function localtime() to obtain the local time from Windows. The documentation says that this function checks the Windows control panel and returns the proper local time. So far, nobody complained so I guess only you have this problem (anybody else to correct me???). The only hint I found is to set the environment variable TZ. So open a DOS box and enter
set TZ=AST+10
then start elogd.exe interactively in that dos box and see if you get something else. |
Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Dan Duong on Wed Jul 29 04:56:27 2009
|
Stefan Ritt wrote: |
Dan Duong wrote: |
Hi all,
I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.
I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.
Please help. Thank you very much.
|
That's strange. I use the C function localtime() to obtain the local time from Windows. The documentation says that this function checks the Windows control panel and returns the proper local time. So far, nobody complained so I guess only you have this problem (anybody else to correct me???). The only hint I found is to set the environment variable TZ. So open a DOS box and enter
set TZ=AST+10
then start elogd.exe interactively in that dos box and see if you get something else.
|
I did as instructed but time was 20 hours behide
I have entered set TZ=AST-10 I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan. |
Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Stefan Ritt on Wed Jul 29 09:21:39 2009
|
Dan Duong wrote: |
I did as instructed but time was 20 hours behide
I have entered set TZ=AST-10 I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan.
|
You have to change your environment variable "TZ" system wide. You do that by going to
My Computer/Properties/Advanced/Environment Variables/New
then you enter TZ as the variable name and AST-10 as the value. You might have to reboot your computer. |
Re: display GMT time instead of local time in Entry time/ Last edit field, posted by Dan Duong on Mon Aug 3 03:26:23 2009
|
Stefan Ritt wrote: |
Dan Duong wrote: |
I did as instructed but time was 20 hours behind.
I have entered set TZ=AST-10 I got the correct time. I think my elog files have been changed by someone. elogd file is running in DOS box now. Please help how to run elog as normal or correct elog files. Which file I should check. Is it elconv.c file? Thank you Stefan.
|
You have to change your environment variable "TZ" system wide. You do that by going to
My Computer/Properties/Advanced/Environment Variables/New
then you enter TZ as the variable name and AST-10 as the value. You might have to reboot your computer.
|
It is working with the correct time stamp now. Thanks you very much Stefan. |
MOptions and Extendable, posted by Neil Swartz on Sat Jan 8 17:31:07 2005
|
If an attribute uses MOptions and is also extendable, clicking "Add
<attribute name>" and entering a value adds the value to the MOptions, but
does not put the value into the log entry. The log record has that
attribute blank.
You have to go back into the record and edit it to put the new value in. |