Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 2 of 729  Not logged in ELOG logo
ID Date Icon Author Author Email Category OS ELOG Version Subject
  69240   Tue Oct 20 18:02:42 2020 Reply Stefan Rittstefan.ritt@psi.chQuestionLinuxELOG V3.1.4-ba8Re: From command line: "command Submit not allowed"

"submit not allowed" you typically get if there is a "guest menu" for read-only access and you are not logged in. I never tried the elog program with PAM authentication, but you said that your turned authentication off. What I would do is to strip down your elogd.cfg to a very simple form until the elog utility works, then figure out which configuration makes the trouble.

Stefan

David Wallis wrote:

Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.

David Wallis wrote:

I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

 

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"

 

 

  69239   Tue Oct 20 17:50:50 2020 Reply David Walliswallis@aps.anl.govQuestionLinuxELOG V3.1.4-ba8Re: From command line: "command Submit not allowed"

Update: I tried switching the logbook to no authentication reqiured, and still get the "command Submit not allowed" response.

David Wallis wrote:

I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

 

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"

 

  69238   Tue Oct 20 16:05:40 2020 Question Bruno Schulerbruno.schuler@empa.chQuestionWindows3.1.4-2Upload attachment with py_elog

Hello,

How can one add an attachment to a new or existing entry with py_elog?
E.g. if I want to upload an image.

Thanks for the help!

  69237   Tue Oct 20 15:08:17 2020 Question David Walliswallis@aps.anl.govQuestionLinuxELOG V3.1.4-ba8From command line: "command Submit not allowed"

I'm running  Elog version V3.1.4-ba84827 on Red Hat Linux 7.9. As part of migrating from an older in-house logbook to Elog, I need to upload all the old logbook entries. However, when I attempt to do that with the "elog" command line tool, I'm getting the error "command Submit not  allowed.

I read through a similar report from 2015 (entry #68149), but none of the potential causes seem to be at play here. The logbook is using PAM authentication, and I can log in to the web interface using the same credentials I'm using from the command line. The other case mentioned a dis-allowed encoding format, but my logbook is configured to allow all formats.

 

This is the command line I'm using:

/usr/local/elog/bin/elog -v -h logbook.aps.anl.gov -p 8081 -l On_Call -x -n 2 -a Date='10/19/2020 01:02' Author="David Wallis" Title='Test Upload' Status='Open' System='On-Call' -u 'wallis' '*****'  "This is a test message"

  69236   Tue Oct 20 08:24:20 2020 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowslatestRe: Field values dependent on other selections

Look in the manual under "conditional attributes"

Stefan

Anthony Krishock wrote:

All,

I would like to know if there is a way in elog to populate a field based on the value of another field. What I want to do is have a field with a few selections (a menu) and another text field that populates based on what I select from the menu.

 

Is this possible?

 

  69235   Tue Oct 20 02:34:46 2020 Idea Anthony Krishockajkrishock@verizon.netQuestionWindowslatestField values dependent on other selections

All,

I would like to know if there is a way in elog to populate a field based on the value of another field. What I want to do is have a field with a few selections (a menu) and another text field that populates based on what I select from the menu.

 

Is this possible?

  69234   Sun Oct 18 16:59:38 2020 Question Sergei Gavrilovs.gavrilov@gmail.comRequestWindows3.1.4-a04faf9fUp-to-date windows-version

Dear colleagues,
Can someone compile an up-to-date windows-version or write a manual how to do it in Windows without compiling errors?
Thank you.

  69232   Thu Oct 8 12:40:52 2020 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsV3.1.4-a04faf9fRe: Is it possible to visually group attributes with border

Nope, this is not possible. Sorry.

Stefan

Daniel Sajdyk wrote:

Hello,

I'm working on new logbook and in one category I'll have many attributes (many more than in attached screenshot).

So here is my question. Is it possible to visually group such attributes with some border, or something like that?

In screenshot you can see what I want to achieve.

Best Regards

Daniel

 

ELOG V3.1.4-80633ba