Re: Self Register = 3 doesn't work any longer, posted by Olivier Callot on Tue May 17 13:19:03 2011
|
| Stefan Ritt wrote: |
|
| Olivier Callot wrote: |
|
I tried again and confirm the version number. I never got this pannel saying that my request will be processed by an adminstrator. Maybe the installation was incomplete? Is this pannel outside the standard src files? I receive the mail as administrator, but the accout is already valid BEFORE I validate it.
This was working in previous versions, i.e. the entry was not created at all. And login wasn't possible.
We went back to 2.8.0 as the server is regularly crashing with 2.9.0 and we have to keep it alive for our running experiment. We are trying to isolate and reproduce the problem...
|
Try to use the simple config file, and see what happens there. Maybe it's a config option you use differently in the experiment. If you identify the config option which triggers the problem, I can probably reproduce it and fix it. Concerning crashes of 2.9.0: We have it running stably for our experiments, that's why I released it. But there are major changes since 2.8.0, mainly the Kerberos authentification (actually people from CERN asked for that). So it could be that in your case there are problems I don't see. In that case you have to test with which options in the config file the problems start. If elogd crashes, a stack dump would maybe also be helpful for me.
|
Dear Stefan, after a long time I managed to get a test setup. The line that creates the misbehaviour is
Guest Menu Commands = List, Find, Login, Help
which seems inocuous! But with this line a user with inactive account can login without validation. Without this line I get also the proper web page indicating that the account has to be activated when I register as new user.
Another little annoyance: When a user is prevented from login ("The account is currently deactivated") there is NO WAY to login, as any action with Elog tries to use the (non activated) username and password. I can't get back the login page!
Thanks |
|
Re: Self Register = 3 doesn't work any longer, posted by Stefan Ritt on Tue May 17 16:37:42 2011
|
| Olivier Callot wrote: |
|
Dear Stefan, after a long time I managed to get a test setup. The line that creates the misbehaviour is
Guest Menu Commands = List, Find, Login, Help
which seems inocuous! But with this line a user with inactive account can login without validation. Without this line I get also the proper web page indicating that the account has to be activated when I register as new user.
Another little annoyance: When a user is prevented from login ("The account is currently deactivated") there is NO WAY to login, as any action with Elog tries to use the (non activated) username and password. I can't get back the login page!
Thanks
|
Great. This this description I could reproduce the error and fix it. The fix is in SVN revision 2414.
Cheers, Stefan. |
|
Re: Self Register = 3 doesn't work any longer, posted by Olivier Callot on Tue May 17 17:00:03 2011
|
| Stefan Ritt wrote: |
|
| Olivier Callot wrote: |
|
Dear Stefan, after a long time I managed to get a test setup. The line that creates the misbehaviour is
Guest Menu Commands = List, Find, Login, Help
which seems inocuous! But with this line a user with inactive account can login without validation. Without this line I get also the proper web page indicating that the account has to be activated when I register as new user.
Another little annoyance: When a user is prevented from login ("The account is currently deactivated") there is NO WAY to login, as any action with Elog tries to use the (non activated) username and password. I can't get back the login page!
Thanks
|
Great. This this description I could reproduce the error and fix it. The fix is in SVN revision 2414.
Cheers, Stefan.
|
If you could also obtain the display of the message "Your request has been forwarded to the administrator.You will be notified by email upon activation of your new account." when a new user apply in the presence of the Guest Menu commands, that would be perfect. Cheers |
|
Re: Selective emails, posted by Stefan Ritt on Sat Apr 9 10:24:37 2005
|
> I have a question about sending emails. I have a customer service ELog
> currently running but I would like to have an option to be able to pick
> from a list of people, one or more than one to send emails to with the
> logbook entry as the body. I am currently using the email option to send
> emails to a list if an emergency is used in a category but I would like to
> be able to send the entry to different people at different times. I would
> have everyone pre-entered with their names and emails and you could check
> a box by the person or people you want the log entry sent. I wasn't sure
> if this is possible with the current system.
It is. Put an MOptions in you config file, and then put individual email
statements there. Like
Attributes = ..., Notify
MOptions Notify = Joe, Jack, Jim
Email Notify Joe = joe@fujicolor.com
Email Notify Jack = jack@fujicolor.com
Email Notify Jim = jim@fujicolor.com
What this does it give you a checkbox for each name. If the check box is
checked, then the corresponding email statement is executed. Note that the
email address does not have to correspond to the "Notify" value. You could also
use completely different names, like "MOptions Notify = Security, Police,
Admin", and then put some email address from specific people there. |
|
Re: Select -> Edit wipes dates, posted by Stefan Ritt on Tue Nov 18 13:56:59 2008
|
| T. Ribbrock wrote: |
|
I just ran into the following bug:
I have a logbook where entries have several attributes, among which several dates. All of these are set to "Type <attr> = date". If I use the "Select" action, tag several entries and subsequently chose "Edit", the values of all date attributes are wiped. All other attributes are kept at their original values, unless changed explicitly. For the date entries, the date choosers are shown (as when editing a single entry), but all set to blank.
Editing single entries works fine.
|
This problem has been fixed in revision 2.7.5-2143. Please upgrade. |
Re: Select -> Edit wipes dates, posted by T. Ribbrock on Thu Nov 27 11:36:53 2008
|
| Stefan Ritt wrote: |
|
This problem has been fixed in revision 2.7.5-2143. Please upgrade.
|
Yup, this works now - thanks a mil! |
|
Re: Segmentation fault when searching for empty regex, posted by Stefan Ritt on Mon Apr 11 21:22:25 2005
|
I applied a similar fix like you proposed, just omit highlighting at all if I get a
zero length match. Changes committed to CVS. |
|
Re: Segfault on elog-3.1.5-1 when uploading file., posted by gary holman on Thu Dec 12 19:01:39 2024
|
Looks like duplicate report to https://elog.psi.ch/elogs/Forum/69826
| gary holman wrote: |
|
I am receiving a segfault whenever I attempt to upload a file. Please see attached .txt for valgrind output. This occurs in version elog-3.1.5-1. I reverted back to version elog-3.1.4-3 and the segfault does not occur.
Segfault occurs in Elog version: elog-3.1.5-1
System:
Virtualization: kvm
Operating System: Ubuntu 24.04.1 LTS
Kernel: Linux 6.8.0-49-generic
Architecture: x86-64
Hardware Vendor: QEMU
Hardware Model: Standard PC _Q35 + ICH9, 2009_
Firmware Version: 1.15.0-1
Firmware Date: Tue 2014-04-01
Firmware Age: 10y 8month 1w 5d
Valgrind command: valgrind -v --leak-check=full --track-origins=yes ./elogd -s /usr/local/elog -c /var/www/elog/he6/elogd.cfg -f /var/run/elog/he6.pid
Steps to reproduce:
1. Login elog
2. Create new logbook entry
3. Attachement 1: Select Browse
4. Select any file.
5. Select Upload
|
|
|