It does require SSL, though thats where stunnel came in.(Thanks to Sergio for all the help and getting me that far, as well as with all the iptable help :D) .

I was however finally able to get it working just a few minutes ago using GMAIL as the SMTP.

I was able to telnet into smtp.gmail.com over the stunnel, and when I repeated the process that elog goes through from information that I grabbed with TCPdump, everthing would work, until it got to the password that ELOG sends and that was created using : /usr/local/sbin/elogd -t password -c /usr/local/elog/elogd.cfg. When I tried to decode the password, it also gave me errors.

I encoded the password myself, and when I changed the one in [global] to match the one I created instead, ELOG was able to connect and send mail (What I still dont understand is that when I encode my own username to use on telnet, it fails, but the one I got from the tcpdump from elog works.. so its a mixture of the ELOG encoded username, and my own encoded password).

I dont know if it would help if I type up the rest of what we did to get it working here for anyone else for future reference. It does require iptables and stunnel to be installed. Though its a single entry into iptables, and small addition to stunnel.conf once they are running.

As far as I know GMAIL requires SSL for its SMTP connection, which ELOG does not (yet) support. But you can set up your own SMTP server easily. Should be easier than your iptables work.  

Firstly, as with some of the others recently, I am a complete newb when it comes to linux, Though I refuse to let that stop me and really want to get this working.

Pretty much I have a situation where I have been asked to install ELOG, though I am unable to use port 25 at all and also need to use GMAIL for the SMTP server?
It is also my undertanding from the documentation that ELOG only sends mail via port 25

So, I have setup iptables to forward everything from port 25 and a GMAIL IP address used in ELOG's global config for the SMTP, to a stunnel that redirects everything to GMAIL on port 465.
While getting that right took me almost two days, and that was with tons of help and more than half of it being spoon fed to me (though I have learnt SO SO MUCH from just that).
I am still unable to get ELOG to send emails, even if does now seem to connect

Below is a copy of the log from last night (I have spent most of the day trying to sort it out further, but I get the same error)

So I guess my question is, Is it possible to use GMAIL, with ELOG, based on my current conditions, and does anyone have any idea what I can do to go on from here, as I doubt I am the first one to head down this road?
 

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

10-Apr-2012 21:45:19 [Chris@1.2.3.4] {logbookA} Email from <chris@server.com> to chris@server.com, SMTP host 173.194.67.108:
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 220 mx.google.com ESMTP XXXXXXXX.XX^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA}
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} EHLO SERVER.COM^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-mx.google.com at your service, [152.106.18.2]^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-SIZE 35882577^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-8BITMIME^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250-AUTH LOGIN PLAIN XOAUTH^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} 250 ENHANCEDSTATUSCODES^M
10-Apr-2012 21:45:20 [Chris@1.2.3.4] {logbookA} AUTH LOGIN^M
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} Username:
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} username@gmail.com
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} Password:
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} MYXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
10-Apr-2012 21:45:21 [Chris@1.2.3.4] {logbookA} 501 5.5.2 Cannot Decode response fl2sm792152wib.2

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


Right now I am pretty stuck, and any advice would be greatly appreciated on how to move forward.

Thanks in Advance
 

All you need is a SSL=1 in the config file, then the default port of 443 will be used. The URL is the one seen from outside, like

https://hf-info-elog.psi.ch

or so. The certificate from the distribution is self-signed and therefore the browser will complain. Go to AIT to obtain an official certificate.

- Stefan

I'm slowly able to see the finish line

Now all I need to do is get SSL to work. My server name is hf-info-elog and I'm not sure what the correct values for Port= and URL= should be.

thank
Tom (the green-horn)

  I think it's working now !!!!

Thanks
Tom

/etc/rc.d/init.d/elogd stop

Just compile elogd with Kerberos support and copy it over the existing elogd daemon.

 O.K.
Like I said in the beginning, I'm a linux green-horn How do I stop the elogd daemon, and do I have to delete all the elog files and directories created by the RPM or can I just follow the instructions for the tar file and install / make over the RPM installation?