Re: Rename Logbook, posted by David Pilgram on Fri Sep 30 22:55:01 2011
|
| mike cianci wrote: |
|
| Stefan Ritt wrote: |
|
| David Pilgram wrote: |
|
Anyway, Stefan <i>et al</i> have got CERN's faster-than-light particle problem to deal with this morning.
|
I would be too lucky if I just could fix this as I fix some ELOG problems! I guess hundreds of physicists right now are pondering about what could have gone wrong in data taking, because nobody really believes that this is a real effect.
|
Got it to work, manipulating the files was not that hard once I got over the FEAR factor. Good luck with the speed of light thing.
|
Well done Mike!
One result is that I've also learnt things, realised that there are some known unknowns and perhaps some unknown unknowns in my
understanding of Elog. |
|
Re: multiple homes?, posted by Stefan Ritt on Wed Nov 2 10:54:38 2011
|
| Christoph Kukulies wrote: |
|
Is it possible to have many roots with one elogd (or run several elogds), such that you can seaparate different groups or themes from each other:
electronics
trigger
power
mechanics
detector
support
Thanks.
Christoph
|
Have a look at "top groups" in the documentation |
|
Re: Search Option, posted by Stefan Ritt on Wed Nov 2 21:35:13 2011
|
| Carl Shirey wrote: |
|
Is there a way to setup a search, to search several log books but not all the logs books at one time?
Thanks
Carl
|
No. You can either search one logbook or all logbooks. There is however the way to have separate groups of logbooks, which are "invisible" from each other. Like running several elogd daemons at the same time. Then your search on all logbooks will only run on the logbooks of one group. Check the documentation for "top groups".
- Stefan |
|
Re: multiple homes?, posted by Christoph Kukulies on Mon Nov 7 10:12:04 2011
|
| Stefan Ritt wrote: |
|
| Christoph Kukulies wrote: |
|
Is it possible to have many roots with one elogd (or run several elogds), such that you can seaparate different groups or themes from each other:
electronics
trigger
power
mechanics
detector
support
Thanks.
Christoph
|
Have a look at "top groups" in the documentation
|
Thanks. I got it working so far. One minor glitch:
I have one topgroup (with 2 subgroups),
electronics
trigger
power
and onother topgroup (only 1 subgroup)
mechanics
detector
When I get the login screen for the second (with the only one subgroup) it says in the header:
"Several logbooks are defined on this host. Please select the one to connect to:"
and below only the one group (detector) is shown, so actually nothing to select.
This may be possibly achieved by not defining a subgroup for the second one and leaving it as a topgroup,
but I don't know how it behaves, when the group admin decides to create a subgroup. Can he do
without requiring superuser or elog permissions?
--
Christoph
|
|
Re: Disable attachment in notification email message?, posted by Stefan Ritt on Thu Nov 10 09:03:55 2011
|
| Hung Dao wrote: |
|
I have tried to set Email Format = 111 but still receiving attachments in the notification emails. Does anyone know how to configure? So the notification email will not include attachments.
|
I just tried and it works fine for me as expected. So you must so something wrong like:
- change the wrong elgod.cfg,
- have a typo in your configuration
- have a too old version of elogd
Why don't you upgrade to the current version and try again? I forgot when I introduced this feature, but it might be after version 2.6 which you are using.
- Stefan |
|
Re: Disable attachment in notification email message?, posted by Mike Bodine on Fri Nov 18 17:38:04 2011
|
| Stefan Ritt wrote: |
|
| Hung Dao wrote: |
|
I have tried to set Email Format = 111 but still receiving attachments in the notification emails. Does anyone know how to configure? So the notification email will not include attachments.
|
I just tried and it works fine for me as expected. So you must so something wrong like:
- change the wrong elgod.cfg,
- have a typo in your configuration
- have a too old version of elogd
Why don't you upgrade to the current version and try again? I forgot when I introduced this feature, but it might be after version 2.6 which you are using.
- Stefan
|
In a test area we loaded elogd 2.9.0 built Mar 21 2011, 08:48:02 revision 2396
During our testing we started the creation of a new elog, then backed out cancelling the creation and received the following error.
Error: Too many parameters (> 120). Cannot perform operation.
We do not see this error in the older version. |
|
Re: Cascading menus???, posted by Eoin Butler on Tue Dec 13 22:18:04 2011
|
| ron murphy wrote: |
|
This may be already answered somewhere around here, but I could not find it.
Question: Is it possible to have a pull down will a sub menu. Something like,
Entry 1
Entry 2 --> Entry 2a
Entry 2b
Entry 2c
Entry 3
Entry 4
|
The way I do this is
|
Attributes = Author, Subject, Run, Type, Hardware, Software,
Options Type = Announcement{1}, Shift_Summary{2}, Physics_Discussion{3}, Analysis{4}, Hardware{5}, Software{6}
Options Hardware = Computers, Cryostat/Vacuum, DAQ, Environment Sensors, Magnets
Options Software = Analysis/Simulations, Control/Measurement, Detector, Linux, MIDAS, Sequencer, Windows
Show Attributes = Author, Type, Subject
{5} Show Attributes = Author, Type, Subject, Hardware
{6} Show Attributes = Author, Type, Subject, Software
|
|
|
Re: Problems with Version 2.9.0 Service did not start, posted by Stefan Ritt on Wed Dec 14 10:18:37 2011
|
| Michael Dannmeyer wrote: |
|
Hello,
I tried to update our ELOG installation 2.7.8 to 2.9.0. If I try to start the service i get the error:
Error 193: %1 is not a valid win32 application.
I uninstalled the old version an installed the new one.
Do you have any Idea? The OS is windows 2000 Server.
Best regards
Michael
Could not start the elogd service on local Computer
|
Can you start elogd.exe manually in a DOS box? If you get the same error there, the download file might be corrupted and you should try to re-load it again.
Best regards,
Stefan |
|