| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
1941
|
Tue Sep 19 17:32:28 2006 |
 | Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
| Attachment 1: elogd.cfg
|
[global]
port = 8080
[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
|
|
1942
|
Tue Sep 19 19:22:31 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Stefan Ritt wrote: |
| Steve Jones wrote: |
I think I found it. Try this:
Locked Attributes = ApprovedDate, CompletedDate
##################################################
# Define CRState
#
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
In my config when I remove the two attributes from "LOCKED ATTRIBUTES" the fields do not get blanked out.
|
No, even with that it does not get blanked out. Attached is the complete elogd.cfg with which it works fine in my case (R1714). Can you try that? |
| Quote: |
Stefan, when I try that config in a demo logbook in my installation *but with all other items in [global] I get the same field-blanking behavior. I am going to try going back to a completely pristine .cfg, but I suspect this will work fine. I will need to add back in configuration items until I run into the culprit.
Ok, I found it. Try this config:
[global]
port = 8080
[demo]
Comment = Test
Attributes = Author, CRState, ApprovedDate, CompletedDate
Locked Attributes = ApprovedDate, CompletedDate
Type CompletedDate = date
Type ApprovedDate = date
Format CompletedDate = 1
Options CRState = PENDING{a}, APPROVED{b}, HOLD{a}, REJECTED{a}, COMPLETED{c}
{a}
{b} Preset ApprovedDate = $date
{c} Preset CompletedDate = $date
Setting the "Type" to "date" causes the blanking to occur.
|
|
|
1943
|
Tue Sep 19 20:28:15 2006 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Steve Jones wrote: |
Setting the "Type" to "date" causes the blanking to occur.
|
Ok, then don't set the "Type" to "date"  |
|
1945
|
Tue Sep 19 20:38:49 2006 |
| Steve Jones | steve.jones@freescale.com | Question | All | 2.6.2-1714 | Re: Re: Why are Preset fields blanked out? |
| Stefan Ritt wrote: |
| Steve Jones wrote: |
Setting the "Type" to "date" causes the blanking to occur.
|
Ok, then don't set the "Type" to "date" |
| Quote: |
Yuk! Thanks!
|
|
|
66615
|
Tue Nov 17 11:01:50 2009 |
| Heinzmann | catman333@web.de | Question | Windows | 2.7.7 | Re: Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications |
| Stefan Ritt wrote: |
|
| Heinzmann wrote: |
|
Hello Stefan,
how can I activate the part like: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications
|
Just check the check boxes:
Isn't that obvious?
|
Sorry wrong question, I meant how can I configure this part?
|
|
66619
|
Tue Nov 17 16:44:43 2009 |
| Diogo Alves | diogomiguelalves@gmail.com | Question | Linux | Mac OSX | 2.7.7 | Re: Re: Show dropdown menus as a function of selecting an option in another dropdown menu |
| Stefan Ritt wrote: |
|
| Diogo Alves wrote: |
|
Hello,
I'm having some difficulties in having a tasks manager up and running.
The total attributes list is:
- Attributes = List, Project, SubProject, SubSubProject, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat
I would like to have the interface display the following attribute when I click "New":
- List (Options = Personal, Work)
After choosing a List "Personal" I would like to have the following attributes available for edit:
- List (Options = Personal, Work)
- Project (Options = Dummy1)
- Title
- Priority (Options = ...)
- Context (Options = ...)
- Status (Options = ...)
- Due Date (datetime)
- Start Date (datetime)
- Alarm (datetime)
- Repeat (Options = ...)
After choosing the Project "Dummy1" I would like to have the following attributes available for edit:
- List (Options = Personal, Work)
- Project (Options = Dummy1)
- SubProject (Options = Dummy2)
- Title
- Priority (Options = ...)
- Context (Options = ...)
- Status (Options = ...)
- Due Date (datetime)
- Start Date (datetime)
- Alarm (datetime)
- Repeat (Options = ...)
where Dummy2 is an option of the SubProject attribute only because Dummy1 was the chosen option of attribute Project.
What happens is that when I choose Dummy1 from the Project attribute, the SubProject attribute is not displayed in order to be editable.
Is there a way around this?
Thank you.
Kind Regards,
Diogo
Here's the configuration file relative to the "Tasks" logbook:
================================================
Password file = passwords.pwd
Self register = 0
Admin user = someuser
Login user = someuser
Allow password change = 1
Theme = default
Comment = Task Manager
Attributes = List, Project, SubProject, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat
List display = ID, Date, Author, List, Title, Priority
Show Attributes Edit = List
Options List = Personal{1}, Work{2}
Options Priority = High, Medium, Low, None
Options Context = @ Home, @ Work - IST
Options Status = Not Started, Start Delayed, Started, Started - On Hold, 1/4 Done, 1/4 Done - On Hold, 1/2 Done, 1/2 Done - On Hold, 3/4 Done, 3/4 Done - On Hold, Done
Options Repeat = Hourly, Daily, Weekdays, Weekend days, Weekly, Monthly, Yearly
{1} Show Attributes Edit = List, Project, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat
{1} Options Project = Dummy1{11}
{11} Show Attributes Edit = List, Project, SubProject, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat
{11} Options SubProject = DummyChild1
Extendable options = List, Project, SubProject, SubSubProject
Type Due Date = datetime
Type Start Date = datetime
Type Alarm = datetime
Required Attributes = List, Title
Reverse sort = 1
Default encoding = 0 ; ELcode
Thumbnail size = 500
|
There is one "feature" which causes this not to work. If an option is present several times (in your case "Show Attributes Edit"), the first one is taken which fulfills the current condition(s). So what happens is you select List=Personal, which triggers condition "1". Then you select "Dummy1", which triggers condition "11". Now elog goes top down, finds that List=Personal, so sets condition "1", then continues, finds {1} Show Attributes Edit = ... and takes this one. What I propose is to do the following:
Options List = Personal{1}, Work{2}
...
{3} Show Attributes Edit = List, Project, SubProject, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat
{3} Options SubProject = DummyChild1
{1} Show Attributes Edit = List, Project, Title, Priority, Context, Status, Due Date, Start Date, Alarm, Repeat
{1} Options Project = Dummy1{3}
Note that {3} Show Attributed Edit come before {1} Show Attributes Edit, so as soon as you select "Dummy1", the first "Show Attributes Edit" gets
activated which contains "SubProject".
|
Thank you ... good to know about these elog features. Works fine now!!! |
|
66616
|
Tue Nov 17 11:24:59 2009 |
| Stefan Ritt | stefan.ritt@psi.ch | Question | Windows | 2.7.7 | Re: Re: Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications |
| Heinzmann wrote: |
|
| Stefan Ritt wrote: |
|
| Heinzmann wrote: |
|
Hello Stefan,
how can I activate the part like: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications
|
Just check the check boxes:
Isn't that obvious?
|
Sorry wrong question, I meant how can I configure this part?
|
There is nothing to activate. As soon as you have some logbooks defined and you are using user level access ("password file = ..."), this page will show up. |
|
66620
|
Tue Nov 17 19:04:16 2009 |
 | Heinzmann | catman333@web.de | Question | Windows | 2.7.7 | Re: Re: Re: Re: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications |
| Stefan Ritt wrote: |
|
| Heinzmann wrote: |
|
| Stefan Ritt wrote: |
|
| Heinzmann wrote: |
|
Hello Stefan,
how can I activate the part like: Subscribe to logbooks: Linux Demo, Database, etc.. regarding enable automatic email notifications
|
Just check the check boxes:
Isn't that obvious?
|
Sorry wrong question, I meant how can I configure this part?
|
There is nothing to activate. As soon as you have some logbooks defined and you are using user level access ("password file = ..."), this page will show up.
|
Sorry,
was my mistake, may I,m a little bit stressed.
cheers,
Michael |
|