i have expand flag set to 0 but it doesn't seem to be working...

i can expand and collapse via the links, or if i make sure the url includes it.

The exit status of elog is always 1.  It should be zero for
a successful submission.

How can I exclude the access of a number of users in one (out of two) logbooks running in the same server and URL?

Hi all,

I'm absolutely new with ELOG and have only basic programming skills...

I'd like to use ELOG, so I have installed it in my computer to start playing with it (I installed version 2.7.0-1953 because with the latest one I got an error with the elogd.cfg file). I've been able to open the Demo logbook but wasn't able to submit a new entry into it. I get the following error:

"HTML encoding not allowed"

Could you please explain me how I could solve this problem?

I thank you in advance for your help.

After registering, elog displays a page with the message:

     Error: Command "Config" is not allowed for user ""

However, the registration is successful. This causes confusion, and results in users registering multiple times.

In the elogd.conf file, I have the directive:

     Allow Config = bergman

Any suggestions?

I automatically install software on 3 machines in our lab, and at the end of the process, use eLOG to record relevant information for each machine (all running Windows XP) via the command line program elog.exe.  2 of the machines log their info correctly, but on third machine, I get the following error:

    Cannot retrieve host name: No error

The error is not very clear (i.e., the error is "no error"?), and furthermore, operationally, the error makes no sense to me, for the three machines are supposedly configured the same.  Additionally, the elog.exe used is stored on a network drive, as are the other batch files that all3 machines use, so it is not as a problem could creep in due to differing versions/configurations of files.

Just in case I am overlooking something, here's the command line invocation (I've X'd out sensitive information):

C:\>x:\@adat\tools\elog.exe -h max13 -l "Maxtee" -u xxxxxxxxxx xx1234   -a Tester=AULS_xxx_y    -a M
achine="Mercury 99"   -a "Module Type"=Controller   -a "Action Description=Configuration Change"   -
a Title="AULS upgraded to 1.2.7344 from [1.1.7343]."   -a "Card Count=998352"   -m X:\@ADAT\InterimP
F\MERCURY29.Blat_Msg1_PostBoot.TXT 1>X:\@ADAT\InterimPF\MERCURY29_eLog_CmdLineOutput1_(PostBoot).txt

Cannot retrieve host name: No error

Obvoiusly, there *must* be some configuration difference between the 2 working and 1 non-working machine, but I am at a loss to figure it out.

I am not sure which version of eLOG is being used, but the size of the elog.exe is 139,264. 

I suggest a new option be added to display the version information, or display the version info whenever eLOG is execute, or display the version info when "-?" option is used.