Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 36 of 806  Not logged in ELOG logo
icon5.gif   How to setup Change attributes in detail view/edit mode ?, posted by Holger Mundhahs on Wed Feb 22 16:27:39 2006 DetailView2.jpgEditView2.jpgListView2.jpg
Hello @all,

because I've got a very quick response on my 1st question regarding
"Change attributes" here is anonther one:
I've defined 2 attributes with "Change attribute" / "List Change attribute" (see configuration).
Because this values are build on other attributes I want to hide these attributes in 
NEW / EDIT mode. How is this possible?

Regards
Holger
---
CONFIGURATION:
Comment = DEMO
Attributes = Admin, Hostname, IP-Adresse, Funktion, RIB Hostname, RIB IP, RIB http, ELOGs http
Change RIB http = <a href="https://$RIB Hostname/" target="_new">RIB-Board</a>
List Change RIB http = <a href="https://$RIB Hostname/" target="_new">RIB-Board</a>

Change ELOGs http = <a href="http://elogs/$Hostname/">ELOG</a>
List Change ELOGs http = <a href="http://elogs/$Hostname/">ELOG</a>

Preset Admin = DEMO
Locked Attributes = Admin, RIB http, ELOGs http
Fixed Attributes Edit = RIB http, ELOGs http
Display search = ID, Date, Admin, Hostname, RIB http, ELOGs http
List Display = ID, Date, Admin, Hostname, RIB http, ELOGs http
Link Display = ID
icon5.gif   How to build own/customized selection page?, posted by Holger Mundhahs on Wed Feb 22 19:04:19 2006 
Hello @all,

with "Selection page = ..." I can link to an self defined selection page for the systems.
As I understand it must be an static page, or how is it possible to define the content based
on the available logbooks or groups?

Regards
Holger
    icon2.gif   Re: How to build own/customized selection page?, posted by Stefan Ritt on Wed Feb 22 20:00:19 2006 

Holger Mundhahs wrote:
Hello @all,

with "Selection page = ..." I can link to an self defined selection page for the systems.
As I understand it must be an static page, or how is it possible to define the content based
on the available logbooks or groups?

Regards
Holger


Yes it must be a static page.
    icon2.gif   Re: How to setup Change attributes in detail view/edit mode ?, posted by Stefan Ritt on Wed Feb 22 20:36:53 2006 
> because I've got a very quick response on my 1st question regarding
> "Change attributes" here is anonther one:

Don't stress it too much ;-)

> I've defined 2 attributes with "Change attribute" / "List Change attribute" (see configuration).
> Because this values are build on other attributes I want to hide these attributes in 
> NEW / EDIT mode. How is this possible?

Show Attributes = Admin, Hostname, IP-Adresse, Funktion, RIB Hostname, RIB IP

hides the attributes in the New/edit mode, but unfortunately also in the detailed view.
    icon2.gif   Re: How to setup Change attributes in detail view/edit mode ?, posted by Holger Mundhahs on Thu Feb 23 08:44:25 2006 
Hello Mr. Ritt,

I've changed the category to "Request" because I think it would be practical
if I can hide the attributes which are build on values of other attributes with
"Change".

Regards
Holger Mundhahs

> > because I've got a very quick response on my 1st question regarding
> > "Change attributes" here is anonther one:
> 
> Don't stress it too much ;-)
> 
> > I've defined 2 attributes with "Change attribute" / "List Change attribute" (see configuration).
> > Because this values are build on other attributes I want to hide these attributes in 
> > NEW / EDIT mode. How is this possible?
> 
> Show Attributes = Admin, Hostname, IP-Adresse, Funktion, RIB Hostname, RIB IP
> 
> hides the attributes in the New/edit mode, but unfortunately also in the detailed view.
    icon2.gif   Re: How to setup Change attributes in detail view/edit mode ?, posted by Stefan Ritt on Thu Feb 23 09:19:27 2006 
> I've changed the category to "Request" because I think it would be practical
> if I can hide the attributes which are build on values of other attributes with
> "Change".

Have you tried

Show Attributes = Admin, Hostname, IP-Adresse, Funktion, RIB Hostname, RIB IP

???

Does it bother you if then the attributes are also hidden in the detailed view?
    icon2.gif   Re: How to setup Change attributes in detail view/edit mode ?, posted by Holger Mundhahs on Thu Feb 23 09:45:54 2006 
No, I havn't tried it, because it's the only way where I can see ALL attributes, and
I belief, that it works to hide the attributes on all views.

Here an Example:

I have 5 attributes where I can enter values, and 5 addtitional attributes build on them.
I can't see all of them in list view, so the only way to see/use them is the detailed view.
But because there is no value to insert/change these attributes should be hidden in NEW/EDIT mode.
As an workaround I LOCK/FIX these attributes so I can't insert values, but there are now many empty lines.
So if you can implement this functionality it would be great, but if not it's not so bad, 
I can "live" with it ;)

Regards
Holger

> > I've changed the category to "Request" because I think it would be practical
> > if I can hide the attributes which are build on values of other attributes with
> > "Change".
> 
> Have you tried
> 
> Show Attributes = Admin, Hostname, IP-Adresse, Funktion, RIB Hostname, RIB IP
> 
> ???
> 
> Does it bother you if then the attributes are also hidden in the detailed view?
icon5.gif   Comment <attr>/Tooltip <attr> not shown in detail view, posted by Holger Mundhahs on Thu Feb 23 12:06:44 2006 
I've defined a comment or a tooltip for an attribute.
But the text is only shown in NEW/EDIT/REPLY mode, not in detail view.
Is this a bug or how can I enable the text (especially Comment) in
this view?
ELOG V3.1.5-3fb85fa6