> E.g, if you have the following:
> Attributes = TA, Endret, UA, Pri, Status, Oppdragsgiver, EpostTil, EpostIKT, Tittel
> 
> Then you get the heading:
> Logbook             : 
> TA                  : 
> Endret              : 
> UA                  : 
> Pri                 : 
> Status              : 
> Oppdragsgiver       : 
> EpostTil            : 
> EpostIKT            : 
> Tittel              : 
> 
> (removed the attribute data),
> 
> But I would like to send out only:
> UA                  : 
> Pri                 : 
> Status              : 
> Oppdragsgiver       : 
> EpostTil            : 
> Tittel              : 
> 
> Any way to do this in the current version?
> 
> And perhaps change the order too... I'm asking for much perhaps?

I added the option "Email attributes = <list>" for that. So you can specify

Email attributes = UA, Pri, Status, Oppdragsgiver, EpostTil, Tittel

which also sets the order of the attributes. The cange is in CVS.

> I added the option "Email attributes = <list>" for that. So you can specify
> 
> Email attributes = UA, Pri, Status, Oppdragsgiver, EpostTil, Tittel
> 
> which also sets the order of the attributes. The cange is in CVS.

Nice!

Thanks Stefan, I will test it when I'm back from my holiday. Only problem is that this change is also in a
beta version of elog (more "beta" than usual)

Perhaps it is not in this state when I'm back :)

have a nice holiday

Best regards
Michael

> 
> > I added the option "Email attributes = <list>" for that. So you can specify
> > 
> > Email attributes = UA, Pri, Status, Oppdragsgiver, EpostTil, Tittel
> > 
> > which also sets the order of the attributes. The cange is in CVS.

Hello Stefan,

Tested the 2.6.0-beta4, and it sort of works. config parameter:
Email attributes = Tittel,Status

gives the mail:

Logbook             : work
Tittel              : Test
Status              : Åpen

Logbook URL         : http://xxxxxxxxxxxxxxxx/work/904

---

Is there a way to remove Logbook field (and perhaps Logbook URL if I want?)

Best regards
Michael

> Is there a way to remove Logbook field (and perhaps Logbook URL if I want?)

There is the option "Email format", which lets you specify what to show. Try 

Email format = 27

This bug has been fixed in meantime, please upgrade to the current version.

Thanks very much for the quick response Stefan. My apologies, I thought I was on the latest version or I would have upgraded before contacting you.
The file I installed from was the rpm "elog-3.1.5-20240226.el9.x86_64.rpm" which still seems to be the latest version on the Dropbox downloads page.
Do I need to use the tar distribution to get the latest?

I updated the EL9 rpms, so please try again.

Great, thank you again. I have now installed the latest and the problem appears to be gone.