Re: Problems with ELOG and Internet Explorer, posted by Stefan Ritt on Tue Nov 8 08:17:22 2005
|
| Elaine Cristina Franchini dos Anjos wrote: | | I edited and used preview many times and the ELOG worked fine without errors in IE. So, I think my problem is something configured in the proxy or https that Internet Explorer doesn't work very well in this circumstance. |
Have a look at your URL = ... statement in elogd.cfg
It should probably read
URL = https://antares.ccuec.unicamp.br:9696
ELOG uses redirection internally. To determine it's own address, it uses the URL statement. If you use Apache as an proxy together with https, you have to specify the URL under which you usually access ELOG from outside. If this is wrong, ELOG might try to redirect to http:// or something which might not be possible.
A good way to debug this is to run ELOG with the -v flag and carefully watch the HTTP traffic. You will see Location: ... statements which redirect the browser, then the browser will access the redirected URL (if it's correct), or you will see nothing (in case the browser tries to access a non-existing URL). |
page2?cmd=List does not show next page, posted by Oleg Solovyanov on Tue Nov 15 08:35:33 2005
|
Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
|
Re: page2?cmd=List does not show next page, posted by Stefan Ritt on Tue Nov 15 08:40:31 2005
|
| Oleg Solovyanov wrote: | Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
I don't understand. I tried on the Discussion forum:
1. View message, for example http://midas.psi.ch/elogs/Forum/1506
2. Click List, which takes me to http://midas.psi.ch/elogs/Forum/
3. Click Next, which takes me to http://midas.psi.ch/elogs/Forum/page2
Then I really see page2, not the last page. So what do you do differently? |
Getting back from "Find" mode, posted by Yoshio Imai on Tue Nov 15 10:58:23 2005
|
Hi again!
There is one question regarding the "Find" function of the elog. Clicking onto "Search" takes the user to the list view on only those entries that match the search conditions. Since we use the list view in "Full" mode by default, this usually is enough to give us an overview of the event we looked for.
Is there a more direct way to get back to the unfiltered list view than selecting an entry and go to "List" or using "Find" again and clicking on "Back"?
Greeting
Yoshio |
|
Re: Getting back from "Find" mode, posted by Stefan Ritt on Tue Nov 15 12:50:37 2005
|
| Yoshio Imai wrote: | There is one question regarding the "Find" function of the elog. Clicking onto "Search" takes the user to the list view on only those entries that match the search conditions. Since we use the list view in "Full" mode by default, this usually is enough to give us an overview of the event we looked for.
Is there a more direct way to get back to the unfiltered list view than selecting an entry and go to "List" or using "Find" again and clicking on "Back"? |
I can easily add another button for that, will put it on the wish list. |
|
Re: page2?cmd=List does not show next page, posted by Oleg Solovyanov on Wed Nov 16 15:24:53 2005
|
| Stefan Ritt wrote: |
| Oleg Solovyanov wrote: | Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
I don't understand. I tried on the Discussion forum:
1. View message, for example http://midas.psi.ch/elogs/Forum/1506
2. Click List, which takes me to http://midas.psi.ch/elogs/Forum/
3. Click Next, which takes me to http://midas.psi.ch/elogs/Forum/page2
Then I really see page2, not the last page. So what do you do differently? |
Somehow in my logbooks List command would add cmd=List to the URL
And this does not work... |
|
Re: page2?cmd=List does not show next page, posted by Stefan Ritt on Wed Nov 16 15:27:40 2005
|
| Oleg Solovyanov wrote: | Somehow in my logbooks List command would add cmd=List to the URL
And this does not work... |
You use an old version of elog. Please upgrade to the 2.6.0-beta5 which you can obtain from
http://savannah.psi.ch/viewcvs/trunk/src/elogd.c?root=elog&rev=1541 |
|
Re: page2?cmd=List does not show next page, posted by Oleg Solovyanov on Thu Nov 17 23:40:10 2005
|
Yes, new version seems to fix this bug, but...
Now there's a new feature: sometimes it breaks the text message line into 2 when
displaying the summary page.
Maybe it happens only with Russian text  |