ELOG Forum

Demo Discussion

Forum Config Examples Contributions Vulnerabilities

Discussion forum about ELOG, Page 39 of 237

Not logged in

Find | Login | Help

Full | Summary | Threaded | Collapse | Expand

1896 Entries

Goto page Previous 1, 2, 3 ... 38, 39, 40 ... 235, 236, 237 Next

Need to change port 25, posted by Yanick Vachon on Mon Nov 26 17:32:31 2018

Hi,

We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?

Thanks

Re: Need to change port 25, posted by Andreas Luedeke on Tue Nov 27 08:19:11 2018

This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global

The following options are specific to the [global] section:

Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.

Yanick Vachon wrote:

Hi,

We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?

Thanks

Re: Need to change port 25, posted by Stefan Ritt on Tue Nov 27 08:59:45 2018

I believe Yanick means the SMTP port, not the port under which elogd is listening. The SMPT port is hard wired to 25, because port 587 was not yet defiend when I wrote that code. I can make this a variable, but only if it works. So Yanick can you test if port 587 accepts normal SMTP commands? We don't have such a new server at our lab and I cannot test it. Under Windows you can open a command prompt and telnet to the mail server:

telnet <server> 587
HELO test
MAIL FROM: test

your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.

Stefan

Andreas Luedeke wrote:

This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global

The following options are specific to the [global] section:

Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.

Yanick Vachon wrote:

Hi,

We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?

Thanks

Re: Need to change port 25, posted by Yanick Vachon on Tue Nov 27 15:21:31 2018

I Stefan, it works with the 587 port.

Stefan Ritt wrote:

telnet <server> 587
HELO test
MAIL FROM: test

your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.

Stefan

Andreas Luedeke wrote:

This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global

The following options are specific to the [global] section:

Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.

Yanick Vachon wrote:

Hi,

We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?

Thanks

Re: Need to change port 25, posted by Stefan Ritt on Wed Nov 28 16:24:43 2018

Ok, so I added the option

STMP port = xxx

where you can specify 587 to override the default port 25. I committed the changes to bitbucket. Can you compile from sources, or do I have to dig out my dusty Windows PC?

Stefan

Yanick Vachon wrote:

I Stefan, it works with the 587 port.

Re: Need to change port 25, posted by Yanick Vachon on Wed Nov 28 18:23:59 2018

Good!

so, i've tried to compile but iwonder if i does it correctly,

look at the error i got:

Thanks again!

Stefan Ritt wrote:

Ok, so I added the option

STMP port = xxx

where you can specify 587 to override the default port 25. I committed the changes to bitbucket. Can you compile from sources, or do I have to dig out my dusty Windows PC?

Stefan

Yanick Vachon wrote:

I Stefan, it works with the 587 port.

Re: Need to change port 25, posted by Stefan Ritt on Thu Nov 29 09:56:45 2018

I put a new executable for you under https://elog.psi.ch/elog/download/windows/

It's named elog314-2.exe

Best,
Stefan

Yanick Vachon wrote:

Good!

so, i've tried to compile but iwonder if i does it correctly,

look at the error i got:

Thanks again!

Re: Need to change port 25, posted by Yanick Vachon on Wed Nov 28 16:43:14 2018

Hello,

now we kwow it's working are you gonne send us a version with the SMTP port editable?

Thanks!

Yanick Vachon wrote:

I Stefan, it works with the 587 port.

Stefan Ritt wrote:

telnet <server> 587
HELO test
MAIL FROM: test

your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.

Stefan

Andreas Luedeke wrote:

This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global

The following options are specific to the [global] section:

Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.

Yanick Vachon wrote:

Hi,

We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?

Thanks

Re: Need to change port 25, posted by Stefan Ritt on Wed Nov 28 16:53:58 2018

Just read my post 20 mins ago!

Stefan

Yanick Vachon wrote:

Hello,

now we kwow it's working are you gonne send us a version with the SMTP port editable?

Thanks!

Yanick Vachon wrote:

I Stefan, it works with the 587 port.

Stefan Ritt wrote:

telnet <server> 587
HELO test
MAIL FROM: test

your server should then reply with "220 ..." and "250 ..." messages. Once this works, I will implement the variable SMTP port.

Stefan

Andreas Luedeke wrote:

This is nicely explained in the documentation: https://elog.psi.ch/elog/config.html#global

The following options are specific to the [global] section:

Port = <port>
Specifies the TCP port under which the server is listening. Default is 80. Can be superseeded via the '-p' command line flag.

Yanick Vachon wrote:

Hi,

We've made changes in our network and now we have to use port 587 instead of port 25, how can i edit that parameter?

Thanks

messy code for chinese charactor, posted by Wenhao Huang on Fri Oct 26 08:56:59 2018

The Chinese character appears messy code. The encoding way is the default utf-8. How can I solve this problem?

Re: messy code for chinese charactor, posted by Stefan Ritt on Sat Oct 27 10:51:12 2018

Can you post a screenshot?

Wenhao Huang wrote:

The Chinese character appears messy code. The encoding way is the default utf-8. How can I solve this problem?

How many "Extendable options" can I add?, posted by Devrim Esenturk on Fri Oct 26 14:22:59 2018

I am trying to add "Extendable options" for some attribute as below example. However button to add new item for list appears only for the first "Extendable options", if disable the first with (;), button appears for the second. It means elog add new item button only the first line "Extendable options" not for other?

Is this a limitation or bug or am I doing something wrong?

Options Require = N/A, Camera{1}, Lens{2}, Other{3}
{1} MOptions Require Model= XNB-6001, PNM-7000VD, PNM-9000VQ, PNM-9320VQ
{2} MOptions Require Lens = SLA-T2480, SLA-T2480V, SLA-T4680, SLA-T4680V, SLA-T1080F, SLA-2M2400P, SLA-2M2800P, SLA-2M3600P, SLA-2M6000P, SLA-2M1200P, SLA-5M3700P, SLA-5M4600P, SLA-5M7000P, SLA-2M2400Q, SLA-2M2800Q, SLA-2M3600Q, SLA-2M6000Q, SLA-5M3700Q, SLA-5M4600Q, SLA-5M7000Q, SLA-2M2400D, SLA-2M2800D, SLA-2M3600D, SLA-2M6000D
{3} MOptions Require Other = Base Unit

Extendable options = Require Model

Extendable options = Require Lens

Extendable options = Require Other

Thank you

Devrim

Re: How many "Extendable options" can I add?, posted by Grant Jeffcote on Fri Oct 26 16:46:52 2018

David,

Try

Extendable options = Require Model, Require Lens, Require Other,

Regards

Grant

Devrim Esenturk wrote:

Is this a limitation or bug or am I doing something wrong?

Extendable options = Require Model

Extendable options = Require Lens

Extendable options = Require Other

Thank you

Devrim

Re: How many "Extendable options" can I add?, posted by Grant Jeffcote on Fri Oct 26 16:50:48 2018

Apologies that should have been Devrim (autocorrect again) :-(

Grant Jeffcote wrote:

David,

Try

Extendable options = Require Model, Require Lens, Require Other,

Regards

Grant

Devrim Esenturk wrote:

Is this a limitation or bug or am I doing something wrong?

Extendable options = Require Model

Extendable options = Require Lens

Extendable options = Require Other

Thank you

Devrim

Re: How many "Extendable options" can I add?, posted by Devrim Esenturk on Fri Oct 26 19:15:19 2018

No problem :)

Your suggestion worked as it must be. I didn't see "Extendable options = <list>" on guide :/

I guess I need rest a little bit... :(

Thank you

Have a great weekend

Devrim

Grant Jeffcote wrote:

Apologies that should have been Devrim (autocorrect again) :-(

Grant Jeffcote wrote:

David,

Try

Extendable options = Require Model, Require Lens, Require Other,

Regards

Grant

Devrim Esenturk wrote:

Is this a limitation or bug or am I doing something wrong?

Extendable options = Require Model

Extendable options = Require Lens

Extendable options = Require Other

Thank you

Devrim

Buttons missing in ckeditor, posted by Roland Beyer on Thu Oct 11 10:51:17 2018

Hello everybody,

we had to setup a new server for our elog some time ago because the old one crashed. We are now running version ELOG V3.1.1-0767eb0.

In the previous installation we had these nice buttons for file upload, time stamp and equation editor, which are also available here in the online version.

I already found that in the installation directory ("/usr/local/elog/") there exists a directory "scripts" containing a file "ckeditor-config.js", which also contains the lines:
"config.extraPlugins = 'timestamp,dndfiles,eqneditor,fileupload';" and "{ name: 'insert', items: [ 'Image', 'Table', 'HorizontalRule', 'Smiley', 'SpecialChar', 'PageBreak', 'FileUpload', 'Timestamp', 'EqnEditor' ] },"

These plugins seem to be available in the subdirectory "scripts/ckeditor/plugins/". But why are they not loaded? Is it just a version issue? Or something else?

It would be nice to get a hint.

Best regards,

Roland

Re: Buttons missing in ckeditor, posted by Stefan Ritt on Fri Oct 12 10:17:20 2018

Have you selected "HTML" encoding (below the main message box). The HTML editor is not activated if you have "plain" text encoding. Did you try the default elogd.cfg file? If you modified the config file and did a mistake there, the program can for example not properly find all directories. Also makse sure you did a full install with "make install", not just update the executable.

Stefan

Roland Beyer wrote:

Hello everybody,

we had to setup a new server for our elog some time ago because the old one crashed. We are now running version ELOG V3.1.1-0767eb0.

In the previous installation we had these nice buttons for file upload, time stamp and equation editor, which are also available here in the online version.

These plugins seem to be available in the subdirectory "scripts/ckeditor/plugins/". But why are they not loaded? Is it just a version issue? Or something else?

It would be nice to get a hint.

Best regards,

Roland

Re: Buttons missing in ckeditor, posted by Roland Beyer on Fri Oct 12 11:56:26 2018

Dear Stefan,

thanks for your hints. Meanwhile we already solved the problem. I think it was caused by the recovery from a backup version after the server crash ... and the retirement of the person who did the previous installation.

We found the following things to be faulty:

Somebody linked the "elog/scripts/ckeditor"-directory to "../../javascript/ckeditor" (maybe an independent installation of ckeditor). Due to this the relative path in "ckeditor/config.js" to "../ckeditor-config.js" could not be correctly resolved to be "elog/scripts/ckeditor-config.js". Now we put the absolute path.
Furthermore the owner of all files in the elog directory was set to root:root with read access only for root. We changed them now to root:elog and gave read acess for everybody.

Now everything works as expected.

I'm sorry for inconvenience,

Thanks and best regards,

Roland

Stefan Ritt wrote:

Stefan

Roland Beyer wrote:

Hello everybody,

we had to setup a new server for our elog some time ago because the old one crashed. We are now running version ELOG V3.1.1-0767eb0.

In the previous installation we had these nice buttons for file upload, time stamp and equation editor, which are also available here in the online version.

These plugins seem to be available in the subdirectory "scripts/ckeditor/plugins/". But why are they not loaded? Is it just a version issue? Or something else?

It would be nice to get a hint.

Best regards,

Roland

Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Tue Sep 11 19:46:40 2018

Tried compiling on FC27 and 28, both result in binaries but with serious issues; writing data larger than then allowed.
Example output:

make 
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o mxml.o mxml/mxml.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o crypt.o src/crypt.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o regex.o src/regex.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o strlcpy.o mxml/strlcpy.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elog src/elog.c mxml.o crypt.o regex.o strlcpy.o -lssl
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o auth.o src/auth.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elogd src/elogd.c auth.o mxml.o crypt.o regex.o strlcpy.o -lssl
src/elogd.c: In function ‘el_retrieve’:
src/elogd.c:4503:26: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                          ^~
src/elogd.c:4503:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve_attachment.part.30’:
src/elogd.c:4764:26: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                          ^~
src/elogd.c:4764:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_submit.constprop’:
src/elogd.c:4894:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
       sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                             ^~
src/elogd.c:4894:7: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
       sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_submit’:
src/elogd.c:4894:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
       sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                             ^~
src/elogd.c:4894:7: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
       sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:26: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                          ^~
src/elogd.c:4503:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:26: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                          ^~
src/elogd.c:4503:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:26: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                          ^~
src/elogd.c:4503:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_download_page’:
src/elogd.c:14775:32: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
          sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
                                ^~
src/elogd.c:14775:10: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256
          sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘search_last_reply’:
.
.
.

Anyone aware of a cure?

Re: Compile issues on Fedora withe current elog source, posted by Stefan Ritt on Wed Sep 12 11:10:18 2018

This warning is triggered by the use of the sprintf() funciton, which can write beyond the boundary of the destination string. I replaced it by snprintf(), which should make the compiler happy. Code is committed. Unfortuantely I have no FC27 here, so if there is still some waring with the current code, please post the full warning list here.

Stefan

Re: Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Wed Sep 12 15:25:07 2018

I would like to try the new code, I don't see it on elog/download/tar/.
Do you keep updates elsewhere like on get or sourceforge?

Stefan Ritt wrote:

Stefan

Re: Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Wed Sep 12 15:57:31 2018

A quick test suggests I can't just replace sprintf with snprintf.
Original error:

src/elogd.c:4503:4: note: ‘sprintf’ output between 1 and 542 bytes into a destination of size 256 [-Wformat-overflow=]

    sprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);

                          ^~

New error:
src/elogd.c:4503:24: warning: passing argument 2 of ‘snprintf’ makes integer from pointer without a cast [-Wint-conversion] snprintf(file_name, "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name); ^~~~~~~~ In file included from src/elogd.h:42:0, from src/elogd.c:38: /usr/include/stdio.h:340:12: note: expected ‘size_t {aka long unsigned int}’ but argument is of type ‘char *’ extern int snprintf (char *__restrict __s, size_t __maxlen,

Allen Tuttle wrote:

I would like to try the new code, I don't see it on elog/download/tar/.
Do you keep updates elsewhere like on get or sourceforge?

Stefan Ritt wrote:

Stefan

Re: Compile issues on Fedora withe current elog source, posted by Andreas Luedeke on Wed Sep 12 20:52:22 2018

Stefan said "code is commited": that means you can download the latest version from https://bitbucket.org/ritt/elog, as described in https://elog.psi.ch/elog/download.html, and then compile it. Clear now?

Stefan Ritt wrote:

Stefan

Re: Compile issues on Fedora withe current elog source, posted by Allen Tuttle on Thu Sep 13 06:12:59 2018

Latest compile effort on Fedora 28 using the bitbucket source downloaded at 21:12 PDT:

make
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o mxml.o mxml/mxml.c
mxml/mxml.c: In function ‘mxml_write_attribute.part.1’:
mxml/mxml.c:515:25: warning: ‘%s’ directive writing up to 4095 bytes into a region of size between 4094 and 8189 [-Wformat-overflow=]
sprintf(line, " %s=\"%s\"", name_enc, val_enc);
^~ ~~~~~~~
mxml/mxml.c:515:4: note: ‘sprintf’ output between 5 and 8195 bytes into a destination of size 8192
sprintf(line, " %s=\"%s\"", name_enc, val_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mxml/mxml.c: In function ‘mxml_parse_entity’:
mxml/mxml.c:1932:38: warning: ‘sprintf’ may write a terminating nul past the end of the destination [-Wformat-overflow=]
sprintf(filename, "%s%c%s", directoryname, DIR_SEPARATOR, entity_reference_name[i]);
^
mxml/mxml.c:1932:13: note: ‘sprintf’ output 2 or more bytes (assuming 4097) into a destination of size 4096
sprintf(filename, "%s%c%s", directoryname, DIR_SEPARATOR, entity_reference_name[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o crypt.o src/crypt.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o regex.o src/regex.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -c -o strlcpy.o mxml/strlcpy.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elog src/elog.c mxml.o crypt.o regex.o strlcpy.o -lssl
src/elog.c: In function ‘retrieve_elog’:
src/elog.c:524:13: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Location:") + 10, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elog.c: In function ‘submit_elog’:
src/elog.c:982:10: warning: ‘strncpy’ specified bound 80 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 20, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elog.c:977:10: warning: ‘strncpy’ specified bound 80 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 27, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elog.c:956:13: warning: ‘strncpy’ specified bound 80 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Location:") + 10, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -w -c -o auth.o src/auth.c
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elogd src/elogd.c auth.o mxml.o crypt.o regex.o strlcpy.o -lssl
src/elogd.c: In function ‘cleanup’:
src/elogd.c:30641:48: warning: ‘%s’ directive writing up to 255 bytes into a region of size 233 [-Wformat-overflow=]
sprintf(str, "Cannot remove pidfile \"%s\"\n", pidfile);
^~ ~~~~~~~
src/elogd.c:30641:10: note: ‘sprintf’ output between 26 and 281 bytes into a destination of size 256
sprintf(str, "Cannot remove pidfile \"%s\"\n", pidfile);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘split_url’:
src/elogd.c:2490:4: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, p, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘getcfg’:
src/elogd.c:3091:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
src/elogd.c:2753:14:
return _topgroup;
~~~~~~~~~
src/elogd.c:3091:28:
sprintf(str, "global %s", getcfg_topgroup());
^~
src/elogd.c:3091:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(str, "global %s", getcfg_topgroup());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘getcfg.constprop’:
src/elogd.c:3091:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
src/elogd.c:2753:14:
return _topgroup;
~~~~~~~~~
src/elogd.c:3091:28:
sprintf(str, "global %s", getcfg_topgroup());
^~
src/elogd.c:3091:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(str, "global %s", getcfg_topgroup());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘ss_file_find’:
src/elogd.c:3775:10: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
strncpy(*plist + (i * MAX_PATH_LENGTH), dp->d_name, strlen(dp->d_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘html_allowed’:
src/elogd.c:3091:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
src/elogd.c:2753:14:
return _topgroup;
~~~~~~~~~
src/elogd.c:3091:28:
sprintf(str, "global %s", getcfg_topgroup());
^~
src/elogd.c:3091:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(str, "global %s", getcfg_topgroup());
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘create_thumbnail.part.38’:
src/elogd.c:24226:41: warning: ‘%s’ directive writing up to 511 bytes into a region of size 243 [-Wformat-overflow=]
sprintf(thumb_size, " -thumbnail '%s'", str);
^~ ~~~
src/elogd.c:24226:7: note: ‘sprintf’ output between 15 and 526 bytes into a destination of size 256
sprintf(thumb_size, " -thumbnail '%s'", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24253:40: warning: ‘ '’ directive output may be truncated writing 2 bytes into a region of size between 1 and 511 [-Wformat-truncation=]
snprintf(cmd, sizeof(cmd), "%s %s '%s[0-7]'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~
src/elogd.c:24253:7: note: ‘snprintf’ output 13 or more bytes (assuming 1289) into a destination of size 512
snprintf(cmd, sizeof(cmd), "%s %s '%s[0-7]'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24255:40: warning: ‘ '’ directive output may be truncated writing 2 bytes into a region of size between 1 and 511 [-Wformat-truncation=]
snprintf(cmd, sizeof(cmd), "%s %s '%s'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~
src/elogd.c:24255:7: note: ‘snprintf’ output 8 or more bytes (assuming 1284) into a destination of size 512
snprintf(cmd, sizeof(cmd), "%s %s '%s'%s '%s'", _convert_cmd, thumb_options, file_name, thumb_size, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24263:40: warning: ‘%s’ directive output may be truncated writing up to 511 bytes into a region of size 505 [-Wformat-truncation=]
snprintf(str, sizeof(str), "SHELL \"%s\"", cmd);
^~ ~~~
src/elogd.c:24263:4: note: ‘snprintf’ output between 9 and 520 bytes into a destination of size 512
snprintf(str, sizeof(str), "SHELL \"%s\"", cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘rsputs_elcode’:
src/elogd.c:6618:71: warning: ‘%s’ directive output may be truncated writing up to 999 bytes into a region of size 993 [-Wformat-truncation=]
snprintf(hattrib, sizeof(hattrib), "http://%s", attrib);
^~ ~~~~~~
src/elogd.c:6618:28: note: ‘snprintf’ output between 8 and 1007 bytes into a destination of size 1000
snprintf(hattrib, sizeof(hattrib), "http://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:6616:72: warning: ‘%s’ directive output may be truncated writing up to 999 bytes into a region of size 992 [-Wformat-truncation=]
snprintf(hattrib, sizeof(hattrib), "https://%s", attrib);
^~ ~~~~~~
src/elogd.c:6616:28: note: ‘snprintf’ output between 9 and 1008 bytes into a destination of size 1000
snprintf(hattrib, sizeof(hattrib), "https://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:6568:53: warning: ‘%s’ directive writing up to 999 bytes into a region of size 993 [-Wformat-overflow=]
sprintf(hattrib, "http://%s", attrib);
^~ ~~~~~~
src/elogd.c:6568:28: note: ‘sprintf’ output between 8 and 1007 bytes into a destination of size 1000
sprintf(hattrib, "http://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:6566:54: warning: ‘%s’ directive writing up to 999 bytes into a region of size 992 [-Wformat-overflow=]
sprintf(hattrib, "https://%s", attrib);
^~ ~~~~~~
src/elogd.c:6566:28: note: ‘sprintf’ output between 9 and 1008 bytes into a destination of size 1000
sprintf(hattrib, "https://%s", attrib);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_submit_attachment’:
src/elogd.c:4696:55: warning: ‘%s’ directive writing up to 255 bytes into a region of size 226 [-Wformat-overflow=]
sprintf(str, "Cannot write attachment file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:4696:10: note: ‘sprintf’ output between 32 and 287 bytes into a destination of size 256
sprintf(str, "Cannot write attachment file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘attrib_from_param’:
src/elogd.c:9364:30: warning: ‘%d’ directive writing between 1 and 3 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s_%d", ua, j);
^~
src/elogd.c:9364:26: note: directive argument in the range [0, 100]
sprintf(str, "%s_%d", ua, j);
^~~~~~~
src/elogd.c:9364:13: note: ‘sprintf’ output between 3 and 1504 bytes into a destination of size 1500
sprintf(str, "%s_%d", ua, j);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve’:
src/elogd.c:4503:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4503:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve_attachment.part.32’:
src/elogd.c:4764:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4764:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_submit’:
src/elogd.c:4894:49: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4894:7: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4503:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_retrieve.constprop’:
src/elogd.c:4503:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:4503:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_download_page’:
src/elogd.c:14786:52: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:14786:10: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_page_filters’:
src/elogd.c:19317:45: warning: ‘$’ directive writing 1 byte into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(option_whole, "^%s$", option);
^
src/elogd.c:19317:19: note: ‘sprintf’ output between 3 and 1502 bytes into a destination of size 1500
sprintf(option_whole, "^%s$", option);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘is_inline_attachment’:
src/elogd.c:24205:31: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 237 and 247 [-Wformat-overflow=]
sprintf(str, "cid:att%d@%s", i, domain);
^~ ~~~~~~
src/elogd.c:24205:7: note: ‘sprintf’ output between 10 and 275 bytes into a destination of size 256
sprintf(str, "cid:att%d@%s", i, domain);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘load_password_file’:
src/elogd.c:25739:58: warning: ‘%s’ directive writing up to 255 bytes into a region of size 226 [-Wformat-overflow=]
sprintf(str, "Cannot convert password file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25739:13: note: ‘sprintf’ output between 32 and 287 bytes into a destination of size 256
sprintf(str, "Cannot convert password file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25728:70: warning: ‘%s’ directive writing up to 255 bytes into a region of size 211 [-Wformat-overflow=]
sprintf(str, "Cannot access write protected password file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25728:10: note: ‘sprintf’ output between 47 and 302 bytes into a destination of size 256
sprintf(str, "Cannot access write protected password file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25719:54: warning: ‘%s’ directive writing up to 255 bytes into a region of size 227 [-Wformat-overflow=]
sprintf(str, "Cannot access password file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25719:10: note: ‘sprintf’ output between 31 and 286 bytes into a destination of size 256
sprintf(str, "Cannot access password file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25699:43: warning: ‘%s’ directive writing up to 255 bytes into a region of size 238 [-Wformat-overflow=]
sprintf(str, "Cannot open file \"%s\"", file_name);
^~ ~~~~~~~~~
src/elogd.c:25699:10: note: ‘sprintf’ output between 20 and 275 bytes into a destination of size 256
sprintf(str, "Cannot open file \"%s\"", file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘rename_logbook’:
src/elogd.c:13118:27: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(old_dir, "%s%s", lb_dir, lbs->name);
^~
src/elogd.c:13118:7: note: ‘sprintf’ output between 1 and 511 bytes into a destination of size 256
sprintf(old_dir, "%s%s", lb_dir, lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘execute_shell.part.42’:
src/elogd.c:22772:26: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 1493 [-Wformat-overflow=]
sprintf(str, "SHELL \"%s\"", shell_cmd);
^~ ~~~~~~~~~
src/elogd.c:22772:4: note: ‘sprintf’ output between 9 and 10008 bytes into a destination of size 1500
sprintf(str, "SHELL \"%s\"", shell_cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘el_delete_message’:
src/elogd.c:5242:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-truncation=]
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~
src/elogd.c:5242:4: note: ‘snprintf’ output between 1 and 542 bytes into a destination of size 256
snprintf(file_name, sizeof(file_name), "%s%s%s", lbs->data_dir, lbs->el_index[index].subdir, lbs->el_index[index].file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘copy_to’:
src/elogd.c:24081:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 252 [-Wformat-overflow=]
sprintf(str, "?lb=%s\"", lbs->name_enc);
^~
src/elogd.c:24081:10: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(str, "?lb=%s\"", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24085:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 252 [-Wformat-overflow=]
sprintf(str, "?lb=%s&", lbs->name_enc);
^~
src/elogd.c:24085:10: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(str, "?lb=%s&", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:24085:28: warning: ‘%s’ directive writing up to 255 bytes into a region of size 252 [-Wformat-overflow=]
sprintf(str, "?lb=%s&", lbs->name_enc);
^~
src/elogd.c:24085:10: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(str, "?lb=%s&", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_logbook_new’:
src/elogd.c:14689:24: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(str, "../%s/?cmd=Config", lbn);
^~ ~~~
src/elogd.c:14689:7: note: ‘sprintf’ output between 16 and 271 bytes into a destination of size 256
sprintf(str, "../%s/?cmd=Config", lbn);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘display_line’:
src/elogd.c:17743:37: warning: ‘%s’ directive writing up to 1499 bytes into a region of size between 1412 and 1491 [-Wformat-overflow=]
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~ ~~~~~~~
src/elogd.c:17743:10: note: ‘sprintf’ output between 10 and 1588 bytes into a destination of size 1500
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17841:33: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~
src/elogd.c:17841:16: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17976:46: warning: ‘%s’ directive writing up to 1499 bytes into a region of size between 1412 and 1491 [-Wformat-overflow=]
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~ ~~~~~~~
src/elogd.c:17976:19: note: ‘sprintf’ output between 10 and 1588 bytes into a destination of size 1500
sprintf(str, "%s\" style=\"%s", rowstyle, display);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:18201:36: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~
src/elogd.c:18201:19: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:18323:33: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~
src/elogd.c:18323:16: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[i] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:18381:30: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[index] + 14);
^~
src/elogd.c:18381:13: note: ‘sprintf’ output 6 or more bytes (assuming 1760) into a destination of size 256
sprintf(ref, "../%s/%s/%s", lbs->name, str, attachment[index] + 14);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_rss_feed’:
src/elogd.c:19817:31: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s", host_name);
^~ ~~~~~~~~~
src/elogd.c:19817:10: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(url, "http://%s", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:19815:32: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s", host_name);
^~ ~~~~~~~~~
src/elogd.c:19815:10: note: ‘sprintf’ output between 9 and 264 bytes into a destination of size 256
sprintf(url, "https://%s", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:19902:41: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 79 [-Wformat-truncation=]
snprintf(date, sizeof(date) - 1, "%s %+03d%02d", str, (int) (offset / 3600), (int) ((abs((int) offset)
^~ ~~~
src/elogd.c:19902:40: note: directive argument in the range [-596523, 596523]
snprintf(date, sizeof(date) - 1, "%s %+03d%02d", str, (int) (offset / 3600), (int) ((abs((int) offset)
^~~~~~~~~~~~~~
src/elogd.c:19902:40: note: directive argument in the range [0, 59]
src/elogd.c:19902:7: note: ‘snprintf’ output between 7 and 266 bytes into a destination of size 79
snprintf(date, sizeof(date) - 1, "%s %+03d%02d", str, (int) (offset / 3600), (int) ((abs((int) offset)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/ 60) % 60));
~~~~~~~~~~~~
src/elogd.c: In function ‘show_find_form’:
src/elogd.c:12538:40: warning: ‘$’ directive writing 1 byte into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(whole_attr, "^%s$", str);
^
src/elogd.c:12538:16: note: ‘sprintf’ output between 3 and 1502 bytes into a destination of size 1500
sprintf(whole_attr, "^%s$", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:12496:43: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1487 [-Wformat-overflow=]
sprintf(str, "Icon comment %s", option);
^~ ~~~~~~
src/elogd.c:12496:16: note: ‘sprintf’ output between 14 and 1513 bytes into a destination of size 1500
sprintf(str, "Icon comment %s", option);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘submit_message’:
src/elogd.c:16089:7: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 20, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘submit_config’:
src/elogd.c:16368:7: warning: ‘strncpy’ specified bound 256 equals destination size [-Wstringop-truncation]
strncpy(str, strstr(response, "Error: Attribute") + 20, sizeof(str));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘synchronize_logbook’:
src/elogd.c:16859:45: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\".\">%s</a>", lbs->name);
^~
src/elogd.c:16859:13: note: ‘sprintf’ output between 17 and 272 bytes into a destination of size 256
sprintf(loc_ref, "<a href=\".\">%s</a>", lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:16857:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 247 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"%s/\">%s</a>", lbs->name_enc, lbs->name);
^~
src/elogd.c:16857:13: note: ‘sprintf’ output between 17 and 527 bytes into a destination of size 256
sprintf(loc_ref, "<a href=\"%s/\">%s</a>", lbs->name_enc, lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:16855:44: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"../%s/\">%s</a>", lbs->name_enc, lbs->name);
^~
src/elogd.c:16855:13: note: ‘sprintf’ output between 20 and 530 bytes into a destination of size 256
sprintf(loc_ref, "<a href=\"../%s/\">%s</a>", lbs->name_enc, lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17181:50: warning: ‘%s’ directive writing up to 255 bytes into a region of size 247 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~
src/elogd.c:17181:22: note: ‘sprintf’ output 18 or more bytes (assuming 273) into a destination of size 256
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17179:53: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~
src/elogd.c:17179:22: note: ‘sprintf’ output 21 or more bytes (assuming 276) into a destination of size 256
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17185:54: warning: ‘%s’ directive writing up to 1999 bytes into a region of size 240 [-Wformat-overflow=]
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id, loc("remote"));
^~ ~~~
src/elogd.c:17185:19: note: ‘sprintf’ output 24 or more bytes (assuming 2023) into a destination of size 256
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id, loc("remote"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17256:50: warning: ‘%s’ directive writing up to 255 bytes into a region of size 247 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id,
^~
src/elogd.c:17256:22: note: ‘sprintf’ output 18 or more bytes (assuming 273) into a destination of size 256
sprintf(loc_ref, "<a href=\"%s/%d\">%s</a>", lbs->name_enc, message_id,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
loc("Local entry"));
~~~~~~~~~~~~~~~~~~~
src/elogd.c:17254:53: warning: ‘%s’ directive writing up to 255 bytes into a region of size 244 [-Wformat-overflow=]
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~
src/elogd.c:17254:22: note: ‘sprintf’ output 21 or more bytes (assuming 276) into a destination of size 256
sprintf(loc_ref, "<a href=\"../%s/%d\">%s</a>", lbs->name_enc, message_id, loc("local"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:16825:33: warning: ‘%s’ directive writing up to 1999 bytes into a region of size 992 [-Wformat-overflow=]
sprintf(line, "MIRROR: %s", str);
^~
src/elogd.c:17044:31:
mprint(lbs, mode, str);
~~~
src/elogd.c:16825:10: note: ‘sprintf’ output between 9 and 2008 bytes into a destination of size 1000
sprintf(line, "MIRROR: %s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:17501:60: warning: ‘%s’ directive writing up to 1999 bytes into a region of size 240 [-Wformat-overflow=]
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id,
^~ ~~~
src/elogd.c:17501:25: note: ‘sprintf’ output 24 or more bytes (assuming 2023) into a destination of size 256
sprintf(rem_ref, "<a href=\"http://%s%d\">%s</a>", str, message_id,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
loc("Remote entry"));
~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘retrieve_email_from’:
src/elogd.c:3539:44: warning: ‘%s’ directive writing up to 255 bytes into a region of size 245 [-Wformat-overflow=]
sprintf(email_from_name, "ELog <ELog@%s>", host_name);
^~ ~~~~~~~~~
src/elogd.c:3539:7: note: ‘sprintf’ output between 13 and 268 bytes into a destination of size 256
sprintf(email_from_name, "ELog <ELog@%s>", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:3540:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 250 [-Wformat-overflow=]
sprintf(email_from, "<ELog@%s>", host_name);
^~ ~~~~~~~~~
src/elogd.c:3540:7: note: ‘sprintf’ output between 8 and 263 bytes into a destination of size 256
sprintf(email_from, "<ELog@%s>", host_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25877:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 239 [-Wformat-overflow=]
src/elogd.c:3560:53:
get_user_line(lbs, login_name, NULL, NULL, email_from, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25877:41:
sprintf(str, "/list/user[email=%s]", email);
^~
src/elogd.c:25877:10: note: ‘sprintf’ output between 19 and 274 bytes into a destination of size 256
sprintf(str, "/list/user[email=%s]", email);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25873:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 240 [-Wformat-overflow=]
src/elogd.c:3560:29:
get_user_line(lbs, login_name, NULL, NULL, email_from, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25873:40:
sprintf(str, "/list/user[name=%s]", user);
^~
src/elogd.c:25873:10: note: ‘sprintf’ output between 18 and 273 bytes into a destination of size 256
sprintf(str, "/list/user[name=%s]", user);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:3561:38: warning: ‘ <’ directive writing 2 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(email_from_name, "%s <%s>", login_name, email_from);
^~
src/elogd.c:3561:10: note: ‘sprintf’ output between 4 and 514 bytes into a destination of size 256
sprintf(email_from_name, "%s <%s>", login_name, email_from);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘save_user_config’:
src/elogd.c:13400:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size 254 [-Wformat-overflow=]
sprintf(str, "%s \"%s\" %s", loc("Login name"), user_enc, loc("exists already"));
^~ ~~~~~~~~
src/elogd.c:13400:10: note: ‘sprintf’ output 5 or more bytes (assuming 260) into a destination of size 256
sprintf(str, "%s \"%s\" %s", loc("Login name"), user_enc, loc("exists already"));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13425:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 240 [-Wformat-overflow=]
sprintf(str, "/list/user[name=%s]", user_enc);
^~ ~~~~~~~~
src/elogd.c:13425:4: note: ‘sprintf’ output between 18 and 273 bytes into a destination of size 256
sprintf(str, "/list/user[name=%s]", user_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13519:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:13519:19: note: ‘sprintf’ output between 11 and 276 bytes into a destination of size 256
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13517:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:13517:19: note: ‘sprintf’ output between 12 and 277 bytes into a destination of size 256
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13514:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:13514:19: note: ‘sprintf’ output between 9 and 264 bytes into a destination of size 256
sprintf(url, "http://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13512:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:13512:19: note: ‘sprintf’ output between 10 and 265 bytes into a destination of size 256
sprintf(url, "https://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:13705:30: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(str, "../%s/", lbs->name_enc);
^~
src/elogd.c:13705:13: note: ‘sprintf’ output between 5 and 260 bytes into a destination of size 256
sprintf(str, "../%s/", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘activate_user’:
src/elogd.c:25877:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 239 [-Wformat-overflow=]
src/elogd.c:14075:46:
get_user_line(lbs, user_name, NULL, NULL, user_email, NULL, NULL, &inactive);
~~~~~~~~~~
src/elogd.c:25877:41:
sprintf(str, "/list/user[email=%s]", email);
^~
src/elogd.c:25877:10: note: ‘sprintf’ output between 19 and 274 bytes into a destination of size 256
sprintf(str, "/list/user[email=%s]", email);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14111:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:14111:19: note: ‘sprintf’ output between 11 and 276 bytes into a destination of size 256
sprintf(url, "http://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14109:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~ ~~~~~~~~~
src/elogd.c:14109:19: note: ‘sprintf’ output between 12 and 277 bytes into a destination of size 256
sprintf(url, "https://%s:%d/", http_host, elog_tcp_port);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14106:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(url, "http://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:14106:19: note: ‘sprintf’ output between 9 and 264 bytes into a destination of size 256
sprintf(url, "http://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14104:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(url, "https://%s/", http_host);
^~ ~~~~~~~~~
src/elogd.c:14104:19: note: ‘sprintf’ output between 10 and 265 bytes into a destination of size 256
sprintf(url, "https://%s/", http_host);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_forgot_pwd_page’:
src/elogd.c:25877:41: warning: ‘%s’ directive writing up to 255 bytes into a region of size 239 [-Wformat-overflow=]
src/elogd.c:14173:58:
get_user_line(lbs, login_name, NULL, full_name, user_email, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25877:41:
sprintf(str, "/list/user[email=%s]", email);
^~
src/elogd.c:25877:10: note: ‘sprintf’ output between 19 and 274 bytes into a destination of size 256
sprintf(str, "/list/user[email=%s]", email);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25873:40: warning: ‘%s’ directive writing up to 255 bytes into a region of size 240 [-Wformat-overflow=]
src/elogd.c:14173:29:
get_user_line(lbs, login_name, NULL, full_name, user_email, NULL, NULL, NULL);
~~~~~~~~~~
src/elogd.c:25873:40:
sprintf(str, "/list/user[name=%s]", user);
^~
src/elogd.c:25873:10: note: ‘sprintf’ output between 18 and 273 bytes into a destination of size 256
sprintf(str, "/list/user[name=%s]", user);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14221:44: warning: ‘%s’ directive writing up to 255 bytes into a region of size 243 [-Wformat-overflow=]
sprintf(redir, "?cmd=%s&oldpwd=%s", loc("Change password"), pwd);
^~ ~~~
src/elogd.c:14221:13: note: ‘sprintf’ output 14 or more bytes (assuming 269) into a destination of size 256
sprintf(redir, "?cmd=%s&oldpwd=%s", loc("Change password"), pwd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:14225:34: warning: ‘%s’ directive writing up to 999 bytes into a region of size 993 [-Wformat-overflow=]
sprintf(str, "?redir=%s&uname=%s&upassword=%s", str2, login_name, pwd);
^~ ~~~~
src/elogd.c:14225:13: note: ‘sprintf’ output between 26 and 1535 bytes into a destination of size 1000
sprintf(str, "?redir=%s&uname=%s&upassword=%s", str2, login_name, pwd);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_change_pwd_page’:
src/elogd.c:9011:53: warning: ‘%s’ directive writing up to 255 bytes into a region of size 237 [-Wformat-overflow=]
sprintf(str, "?cmd=%s&config=%s&fail=%s", loc("Change password"), getparam("unm"), error_str);
^~ ~~~~~~~~~
src/elogd.c:9011:16: note: ‘sprintf’ output 20 or more bytes (assuming 275) into a destination of size 256
sprintf(str, "?cmd=%s&config=%s&fail=%s", loc("Change password"), getparam("unm"), error_str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:9001:47: warning: ‘%s’ directive writing up to 255 bytes into a region of size 241 [-Wformat-overflow=]
sprintf(str, "?cmd=%s&cfg_user=%s", loc("Config"), config);
^~ ~~~~~~
src/elogd.c:9001:16: note: ‘sprintf’ output 16 or more bytes (assuming 271) into a destination of size 256
sprintf(str, "?cmd=%s&cfg_user=%s", loc("Config"), config);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_edit_form’:
src/elogd.c:10047:33: warning: ‘%s’ directive writing up to 255 bytes into a region of size 251 [-Wformat-overflow=]
sprintf(page_title, "ELOG %s", lbs->name);
^~
src/elogd.c:10047:7: note: ‘sprintf’ output between 6 and 261 bytes into a destination of size 256
sprintf(page_title, "ELOG %s", lbs->name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:10721:35: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 248 [-Wformat-overflow=]
sprintf(title, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:10721:10: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 256
sprintf(title, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11189:52: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 9992 [-Wformat-overflow=]
sprintf(tooltip, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:11189:25: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 10000
sprintf(tooltip, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11138:52: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 9992 [-Wformat-overflow=]
sprintf(tooltip, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:11138:25: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 10000
sprintf(tooltip, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11143:52: warning: ‘%s’ directive writing up to 9999 bytes into a region of size 9992 [-Wformat-overflow=]
sprintf(tooltip, " title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:11143:25: note: ‘sprintf’ output between 10 and 10009 bytes into a destination of size 10000
sprintf(tooltip, " title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11958:41: warning: ‘ -format '’ directive writing 10 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(cmd, "%s -format '%%wx%%h' '%s'", _identify_cmd, file_name);
^~~~~~~~~~
src/elogd.c:11958:25: note: ‘sprintf’ output between 20 and 530 bytes into a destination of size 256
sprintf(cmd, "%s -format '%%wx%%h' '%s'", _identify_cmd, file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11956:41: warning: ‘ -format '’ directive writing 10 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(cmd, "%s -format '%%wx%%h' '%s[0]'", _identify_cmd, file_name);
^~~~~~~~~~
src/elogd.c:11956:25: note: ‘sprintf’ output between 23 and 533 bytes into a destination of size 256
sprintf(cmd, "%s -format '%%wx%%h' '%s[0]'", _identify_cmd, file_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:12022:42: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s", str, file_enc);
^~ ~~~
src/elogd.c:12022:28: note: ‘sprintf’ output between 2 and 3256 bytes into a destination of size 256
sprintf(ref, "%s/%s", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:12008:48: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~ ~~~
src/elogd.c:12008:34: note: ‘sprintf’ output between 10 and 3264 bytes into a destination of size 256
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:11991:42: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~ ~~~
src/elogd.c:11991:28: note: ‘sprintf’ output between 10 and 3264 bytes into a destination of size 256
sprintf(ref, "%s/%s?thumb=1", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_elog_list’:
src/elogd.c:20242:39: warning: ‘%s’ directive writing up to 79 bytes into a region of size 73 [-Wformat-overflow=]
sprintf(mode_cookie, "elmode=%s", mode);
^~ ~~~~
src/elogd.c:20242:10: note: ‘sprintf’ output between 8 and 87 bytes into a destination of size 80
sprintf(mode_cookie, "elmode=%s", mode);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:21574:43: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 249 [-Wformat-overflow=]
sprintf(ref, "?rsort=%s", str);
^~ ~~~
src/elogd.c:21574:22: note: ‘sprintf’ output between 8 and 1507 bytes into a destination of size 256
sprintf(ref, "?rsort=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:21576:42: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 250 [-Wformat-overflow=]
sprintf(ref, "?sort=%s", str);
^~ ~~~
src/elogd.c:21576:22: note: ‘sprintf’ output between 7 and 1506 bytes into a destination of size 256
sprintf(ref, "?sort=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:21592:38: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1493 [-Wformat-overflow=]
sprintf(str, "title=\"%s\"", comment);
^~ ~~~~~~~
src/elogd.c:21592:16: note: ‘sprintf’ output between 9 and 1508 bytes into a destination of size 1500
sprintf(str, "title=\"%s\"", comment);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:20066:31: warning: ‘3D’ directive writing 2 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s%%3D", param);
^~
src/elogd.c:20066:13: note: ‘sprintf’ output between 4 and 1503 bytes into a destination of size 1500
sprintf(str, "%s%%3D", param);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:20089:31: warning: ‘3D’ directive writing 2 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s%%3D", param);
^~
src/elogd.c:20089:13: note: ‘sprintf’ output between 4 and 1503 bytes into a destination of size 1500
sprintf(str, "%s%%3D", param);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_elog_entry’:
src/elogd.c:25284:33: warning: ‘%s’ directive writing up to 2999 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(ref, "%s/%s", str, file_enc);
^~ ~~~
src/elogd.c:25284:19: note: ‘sprintf’ output between 2 and 3256 bytes into a destination of size 256
sprintf(ref, "%s/%s", str, file_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:25278:43: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 246 and 247 [-Wformat-overflow=]
sprintf(ref, "cid:att%d@%s", index, domain);
^~ ~~~~~~
src/elogd.c:25278:19: note: ‘sprintf’ output between 10 and 266 bytes into a destination of size 256
sprintf(ref, "cid:att%d@%s", index, domain);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘compose_email’:
src/elogd.c:22630:18: warning: ‘%s’ directive writing up to 1599 bytes into a region of size 256 [-Wformat-overflow=]
sprintf(url, "%s%d", str, message_id);
^~ ~~~
src/elogd.c:22630:4: note: ‘sprintf’ output between 2 and 1611 bytes into a destination of size 256
sprintf(url, "%s%d", str, message_id);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘submit_elog’:
src/elogd.c:23108:33: warning: ‘%d’ directive writing between 1 and 3 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s_%d", ua, j);
^~
src/elogd.c:23108:29: note: directive argument in the range [0, 100]
sprintf(str, "%s_%d", ua, j);
^~~~~~~
src/elogd.c:23108:16: note: ‘sprintf’ output between 3 and 1504 bytes into a destination of size 1500
sprintf(str, "%s_%d", ua, j);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:23269:33: warning: ‘%d’ directive writing between 1 and 3 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str, "%s_%d", ua, j);
^~
src/elogd.c:23269:29: note: directive argument in the range [0, 100]
sprintf(str, "%s_%d", ua, j);
^~~~~~~
src/elogd.c:23269:16: note: ‘sprintf’ output between 3 and 1504 bytes into a destination of size 1500
sprintf(str, "%s_%d", ua, j);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:23647:34: warning: ‘%d’ directive writing between 1 and 10 bytes into a region of size between 0 and 1499 [-Wformat-overflow=]
sprintf(str2, "%s_%d", ua, mindex);
^~
src/elogd.c:23647:30: note: directive argument in the range [0, 2147483647]
sprintf(str2, "%s_%d", ua, mindex);
^~~~~~~
src/elogd.c:23647:16: note: ‘sprintf’ output between 3 and 1511 bytes into a destination of size 1500
sprintf(str2, "%s_%d", ua, mindex);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘do_self_register’:
src/elogd.c:26908:27: warning: ‘%s’ directive writing up to 255 bytes into a region of size 253 [-Wformat-overflow=]
sprintf(str, "../%s/", lbs->name_enc);
^~
src/elogd.c:26908:10: note: ‘sprintf’ output between 5 and 260 bytes into a destination of size 256
sprintf(str, "../%s/", lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘show_uploader_finished’:
src/elogd.c:27149:24: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-overflow=]
sprintf(ref, "%s/%s?lb=%s", str, file_enc, lbs->name_enc);
^~ ~~~~~~~~
src/elogd.c:27149:7: note: ‘sprintf’ output between 6 and 771 bytes into a destination of size 256
sprintf(ref, "%s/%s?lb=%s", str, file_enc, lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:27150:30: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-overflow=]
sprintf(ref_thumb, "%s/%s?lb=%s&thumb=1", str, file_enc, lbs->name_enc);
^~ ~~~~~~~~
src/elogd.c:27150:7: note: ‘sprintf’ output between 14 and 779 bytes into a destination of size 256
sprintf(ref_thumb, "%s/%s?lb=%s&thumb=1", str, file_enc, lbs->name_enc);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘interprete’:
src/elogd.c:28378:27: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str1, "?cmd=%s", str);
^~ ~~~
src/elogd.c:28378:7: note: ‘sprintf’ output between 6 and 1505 bytes into a destination of size 1500
sprintf(str1, "?cmd=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:28382:27: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str2, "?cmd=%s", str);
^~ ~~~
src/elogd.c:28382:7: note: ‘sprintf’ output between 6 and 1505 bytes into a destination of size 1500
sprintf(str2, "?cmd=%s", str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:28177:31: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str, "%s: %s", loc("Invalid URL"), str2);
^~ ~~~~
src/elogd.c:28177:10: note: ‘sprintf’ output 10 or more bytes (assuming 1509) into a destination of size 1500
sprintf(str, "%s: %s", loc("Invalid URL"), str2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c:27649:28: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1495 [-Wformat-overflow=]
sprintf(str, "%s: %s", loc("Invalid URL"), str2);
^~ ~~~~
src/elogd.c:27649:7: note: ‘sprintf’ output 10 or more bytes (assuming 1509) into a destination of size 1500
sprintf(str, "%s: %s", loc("Invalid URL"), str2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elogd.c: In function ‘decode_post’:
src/elogd.c:28615:54: warning: ‘%s’ directive writing up to 1499 bytes into a region of size 1483 [-Wformat-overflow=]
sprintf(str, "Error: Filename \"%s\" contains invalid character", str2);
^~ ~~~~
src/elogd.c:28615:22: note: ‘sprintf’ output between 46 and 1545 bytes into a destination of size 1500
sprintf(str, "Error: Filename \"%s\" contains invalid character", str2);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -O3 -funroll-loops -fomit-frame-pointer -W -Wall -Wno-deprecated-declarations -Imxml -DHAVE_SSL -o elconv src/elconv.c -lssl
src/elconv.c: In function ‘ss_file_find’:
src/elconv.c:233:10: warning: ‘strncpy’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
strncpy(*plist + (i * MAX_PATH_LENGTH), dp->d_name, strlen(dp->d_name));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c: In function ‘el_search_message’:
src/elconv.c:325:32: warning: ‘%02d’ directive writing between 2 and 3 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~
src/elconv.c:325:29: note: directive argument in the range [-99, 99]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~
src/elconv.c:325:29: note: directive argument in the range [-2147483647, 2147483647]
src/elconv.c:325:10: note: ‘sprintf’ output between 11 and 285 bytes into a destination of size 256
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:419:32: warning: ‘%06d’ directive writing 6 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%06d.log", dir, max % 1000000);
^~~~
src/elconv.c:419:29: note: directive argument in the range [0, 999999]
sprintf(file_name, "%s%06d.log", dir, max % 1000000);
^~~~~~~~~~~~
src/elconv.c:419:10: note: ‘sprintf’ output between 11 and 266 bytes into a destination of size 256
sprintf(file_name, "%s%06d.log", dir, max % 1000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:388:32: warning: ‘%06d’ directive writing between 6 and 7 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%06d.log", dir, min % 1000000);
^~~~
src/elconv.c:388:29: note: directive argument in the range [-999999, 999999]
sprintf(file_name, "%s%06d.log", dir, min % 1000000);
^~~~~~~~~~~~
src/elconv.c:388:10: note: ‘sprintf’ output between 11 and 267 bytes into a destination of size 256
sprintf(file_name, "%s%06d.log", dir, min % 1000000);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c: In function ‘el_submit’:
src/elconv.c:626:38: warning: ‘%02d’ directive writing between 2 and 3 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%02d%02d%02d_%02d%02d%02d_%s", dir,
^~~~
src/elconv.c:626:35: note: directive argument in the range [-99, 99]
sprintf(file_name, "%s%02d%02d%02d_%02d%02d%02d_%s", dir,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:626:35: note: directive argument in the range [-2147483647, 2147483647]
src/elconv.c:626:16: note: ‘sprintf’ output between 15 and 571 bytes into a destination of size 256
sprintf(file_name, "%s%02d%02d%02d_%02d%02d%02d_%s", dir,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday, tms->tm_hour,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tms->tm_min, tms->tm_sec, str);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:690:29: warning: ‘%02d’ directive writing between 2 and 3 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~
src/elconv.c:690:26: note: directive argument in the range [-99, 99]
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~
src/elconv.c:690:26: note: directive argument in the range [-2147483647, 2147483647]
src/elconv.c:690:7: note: ‘sprintf’ output between 11 and 285 bytes into a destination of size 256
sprintf(file_name, "%s%02d%02d%02d.log", dir, tms->tm_year % 100, tms->tm_mon + 1, tms->tm_mday);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c:656:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%s.log", dir, str);
^~ ~~~
src/elconv.c:656:7: note: ‘sprintf’ output between 5 and 515 bytes into a destination of size 256
sprintf(file_name, "%s%s.log", dir, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/elconv.c: In function ‘scan_messages’:
src/elconv.c:981:29: warning: ‘%s’ directive writing up to 255 bytes into a region of size between 1 and 256 [-Wformat-overflow=]
sprintf(file_name, "%s%sa.log", data_dir, str);
^~ ~~~
src/elconv.c:981:7: note: ‘sprintf’ output between 6 and 516 bytes into a destination of size 256
sprintf(file_name, "%s%sa.log", data_dir, str);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Andreas Luedeke wrote:

Stefan Ritt wrote:

Stefan

Entry size too large for email notification, posted by Jacky Li on Tue May 19 12:27:01 2015

Hi,

I am doing an inline image that is about 2.2 MB. When I do a submit, I got the following message:

Error sending Email via "<email server>": Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it? Thank you.

Jacky

Re: Entry size too large for email notification, posted by Andreas Luedeke on Tue May 19 16:34:20 2015

Hi Jacky,

if I read the source code correctly then the maximum size of a base64 encoded email is hard coded to be 10 MB in elogd.h (recompile after changing it):

#define MAX_CONTENT_LENGTH 10*1024*1024

But I think that an 2.2 MB image should easily fit into that.

Andreas

Jacky Li wrote:

Hi,

I am doing an inline image that is about 2.2 MB. When I do a submit, I got the following message:

Error sending Email via "<email server>": Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it? Thank you.

Jacky

Re: Entry size too large for email notification, posted by Lars Martin on Fri Jul 13 19:14:21 2018

Wouldn't it make sense for ELog (by default) to still notify, but not send the attachments by e-mail if the size limit is reached?

Andreas Luedeke wrote:

Hi Jacky,

if I read the source code correctly then the maximum size of a base64 encoded email is hard coded to be 10 MB in elogd.h (recompile after changing it):

#define MAX_CONTENT_LENGTH 10*1024*1024

But I think that an 2.2 MB image should easily fit into that.

Andreas

Jacky Li wrote:

Hi,

I am doing an inline image that is about 2.2 MB. When I do a submit, I got the following message:

Error sending Email via "<email server>": Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it? Thank you.

Jacky

Re: Entry size too large for email notification, posted by Stefan Ritt on Mon Aug 27 13:07:28 2018

That's how it is implemented. If you use

Max email attachment size = 1000000

then attachments below 1 MB are sent as attachments, and if the attachment is above 1 MB, then only a link to the attachment in the elog is sent.

Stefan

Lars Martin wrote:

Wouldn't it make sense for ELog (by default) to still notify, but not send the attachments by e-mail if the size limit is reached?

Andreas Luedeke wrote:

Hi Jacky,

if I read the source code correctly then the maximum size of a base64 encoded email is hard coded to be 10 MB in elogd.h (recompile after changing it):

#define MAX_CONTENT_LENGTH 10*1024*1024

But I think that an 2.2 MB image should easily fit into that.

Andreas

Jacky Li wrote:

Hi,

I am doing an inline image that is about 2.2 MB. When I do a submit, I got the following message:

Error sending Email via "<email server>": Entry size too large for email notification.

May I know what is the limit of the entry size and how do I change it? Thank you.

Jacky

Changing of entries after expired time restriction by synchronisation, posted by Gino Guenzburger on Thu Aug 16 13:33:39 2018

I'm working on setting up an elog as lab-journal in our group with the following set-up:

The elog is running on a server, with no back-end access for the users.
Multiple people will use it, all loging in with the same user-name and password.
The entries submitted to the log-book can only be edited for 24hours, as defined by the "Restrict edit time= 24" setting in the configuration file.

Now I encountered the following problem in my set-up: Entries that do not have attachments can be changed after these 24hours have passed, by the following set-up: If a user (in the current case me during testing) sets up a local elog on his computer and activates the synchronisation with the elog on the server, he can switch off the time-restriction for editing on his local elog, and if he synchronises the two log-books, the changed entry from the local elog will overwrite the original one from the server-elog.

Obviously this is not very desirable. Therefore I wanted to ask, whether anyone sees a possibility to prevent the editing of entries, which are older than the restricted edit time. A specific function or a change in the synchronisation behaviour would of course be the completest solution, but in my case the problem would also be solved if I could just prohibit the synchronisation. It is not needed, so no harm will be done if it is not possible.

Problem with eloglang.german_UTF8, posted by Andreas Luedeke on Tue Aug 7 10:53:45 2018

I had a problem with restarting ELOG since about a year, and finally I found the culprit. I just want to share it here, to prevent anyone else to make the same mistake,

Apparently the files resources/eloglang.* are rather sensitive to the syntax. But it doesn't tell you: no warning or error message comes up.

The file eloglang.german_UTF8 contains some "missing translations" at the end - and it looks like they produce some problems.

If you don't follow the instructions to create eloglang.german_UTF8 from eloglang.german, but use the file as it is, then the language handling will be corrupted:

some (very few) language strings will point into some void and display garbage strings.

In very rare cases this will even crash "elogd", in all other cases it will confuse your users.

Sometimes ELOG commands like "?Cmd=New" were affected, which makes ELOG unusable.

What made it very hard to debug was the fact that with every restart a different string was affected.

Everything looked fine, and later you see a string in the configuration page is wrong. Restarting fixed that string, but then some other string is gone.

So if you see such a behaviour, check your language file for "unusual syntax".

I haven't checked if the problem is limited to UTF8 - I only saw the problem with the eloglang.german_UTF8 file.

Cheers, Andreas

Goto page Previous 1, 2, 3 ... 38, 39, 40 ... 235, 236, 237 Next

ELOG V3.1.5-3fb85fa6