Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 400 of 808  Not logged in ELOG logo
 Find |  Login |  Help 
 Full | Summary | Threaded | Hide attachments  Show only new entries    6457 Entries 
Goto page Previous  1, 2, 3 ... 399, 400, 401 ... 806, 807, 808   Next  
ID Date Icon Author Author Email Category OS ELOG Version Subjectdown
  67455   Fri Feb 22 11:40:34 2013 Reply Stefan Rittstefan.ritt@psi.chQuestionWindowsELOG V2.7.Re: Multiple versions of elog on one server

Chris Smith wrote:

Stefan Ritt wrote:

Chris Smith wrote:

David Pilgram wrote:

Chris Smith wrote:

Is there a way of having multiple copies of elog running on one windows 2003 server? different ports?

I need to access 2 different elogd.cfg files.

 It's probably not of much help, but for a short time I ran two elog daemons on the same linux box, using different ports.  It was thus able to run with two separate elogd.cfg files.   This is linux, and heavily biased to my eccentric way of running this linux box, but started them as:

/usr/local/sbin/elogd -p 8080 -c /home/logbooks1/elogd1.cfg -d /home/logbooks1

/usr/local/sbin/elogd -p 8081 -c /home/logbooks2/elogd2.cfg -d /home/logbooks2

Do note that as I was the only user on that linux box, I didn't have login etc.

However, I was soon asked questions by Andreas as to how I found this running, as he had encountered problems with an earlier version.  To be honest, that stopped me experimenting too far with this at that point, as well as a coincidental upgrading of my hardware.

But I was doing this *not* because I had to run two separate elogd.cfg files, but other reasons which meant splitting into two at that time vastly improved the performance of elog on the linux box at that time.  So while I didn't actually enounter any problems in doing so, I only have limited experience - and, of course, absolutely none on running even one [windows equivalent of a daemon] on Windows.

I am assuming here you have good reason for two separate elogd.cfg files, rather than just wanting to run two separate logbooks - guessing here, but one set public (no login) and one set private (with login)?

 

 

 I need to do this because there are 2 different groups that each have 6 or 7 different logbooks in their elogd.cfg files.  (and they can't access each others log books)

Currently the first group  accesses elog as http:elog.com:8080.  The elogd windows service executes "C:\Program FilesELOG\elogd.exe" -D -c "C:\Program Files\ELOG\elogd.cfg"  

From what I can tell, whats needed is either some way to get the windows service to run a different config file or there needs to be a way of creating a second elog windows service that points to a different elogd.cfg file. Is there some way of doing this?

Have you checked the option "Top groups", which was made especially for that case? You can create several independent sets of logbooks not seeing each other. 

 I will check out the "Top Groups". But another question, the documentation says "Prior to ELOG version 2.4.1, one had to run two elogd servers in parallel, listening under different ports." ... how do you set this up?

You have to create manually a second service. Clone all entry from the first one, except the command line where you load a different elogd.cfg. But I actually never tried this myself. 

  67636   Thu Dec 12 16:03:07 2013 Reply Paulo Moragapnmoraga@gmail.comQuestionWindowsV2.9.2-245Re: Multiple tab

Paulo Moraga wrote:

Hi noob question I was looking for a config but i cant make it, how to i make multitab logbook like this page?

 

Like in Discussion there are forum,config examples,contribution and vulnerabilities under it

 

Thanks

 

 NVM found it Thanks

  68350   Tue Jul 12 08:31:37 2016 Reply Andreas Luedekeandreas.luedeke@psi.chQuestionLinux | Windows | Mac OSX | All | OtherV3.1.1-3f311c5Re: Multiple outcomes to a conditional attribute

Hi Sofian,

it should work like this:

Options Type = Fault{1}, Test{2}, Report{3}

{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif

It is described under "Multiple conditions" in the documentation (https://midas.psi.ch/elog/config.html#conditional).

Cheers and good luck!

Andreas

Sofian Jafar wrote:

Hi,

First of all, thanks for all the great work, we all thank you here at SESAME synchrotron smiley

I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:

Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}

{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif

I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?

Thanks in advance.

Cheers,

Sofian.

 

 

  68351   Tue Jul 12 08:37:42 2016 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux | Windows | Mac OSX | All | OtherV3.1.1-3f311c5Re: Multiple outcomes to a conditional attribute

What about this:

Options Type = Fault{1}, Test{2}, Report{3}

{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif

-Stefan

Sofian Jafar wrote:

Hi,

First of all, thanks for all the great work, we all thank you here at SESAME synchrotron smiley

I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:

Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}

{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif

I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?

Thanks in advance.

Cheers,

Sofian.

 

 

  Draft   Tue Jul 12 08:44:52 2016 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux | Windows | Mac OSX | All | OtherV3.1.1-3f311c5Re: Multiple outcomes to a conditional attribute

 

Stefan Ritt wrote:

What about this:

Options Type = Fault{1}, Test{2}, Report{3}

{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif

-Stefan

Sofian Jafar wrote:

Hi,

First of all, thanks for all the great work, we all thank you here at SESAME synchrotron smiley

I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:

Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}

{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif

I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?

Thanks in advance.

Cheers,

Sofian.

 

 

 

  68353   Tue Jul 12 09:15:35 2016 Reply Sofian Jafarskjafar@yahoo.comQuestionLinux | Windows | Mac OSX | All | OtherV3.1.1-3f311c5Re: Multiple outcomes to a conditional attribute

Thanks Andreas,

Works great.

I tried reading the documentation on this but I was not able to deduce this solution.

Thanks a lot again.

Andreas Luedeke wrote:

Hi Sofian,

it should work like this:

Options Type = Fault{1}, Test{2}, Report{3}

{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif

It is described under "Multiple conditions" in the documentation (https://midas.psi.ch/elog/config.html#conditional).

Cheers and good luck!

Andreas

Sofian Jafar wrote:

Hi,

First of all, thanks for all the great work, we all thank you here at SESAME synchrotron smiley

I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:

Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}

{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif

I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?

Thanks in advance.

Cheers,

Sofian.

 

 

 

  Draft   Tue Jul 12 09:17:03 2016 Reply Sofian Jafarskjafar@yahoo.comQuestionLinux | Windows | Mac OSX | All | OtherV3.1.1-3f311c5Re: Multiple outcomes to a conditional attribute

Thank you Stefan as well smiley

Stefan Ritt wrote:

What about this:

Options Type = Fault{1}, Test{2}, Report{3}

{1} Options Fault Status = Open{a}, Fixed{b}
{2,3} Preset Fault Status = NA
{1} Preset Icon = attn.png
{2,3} Preset Icon = icon1.gif

-Stefan

Sofian Jafar wrote:

Hi,

First of all, thanks for all the great work, we all thank you here at SESAME synchrotron smiley

I am trying to set a conditional attribute where selecting one option in that attribute should trigger multiple outcomes as shown below:

Options Type = Fault{1_1&1_2}, Test{2_1&2_2}, Report{2_1&2_2}

{1_1} Options Fault Status = Open{a}, Fixed{b}
{2_1} Preset Fault Status = NA
{1_2} Preset Icon = attn.png
{2_2} Preset Icon = icon1.gif

I tries adding "&" as shown but that didn't work, my goal is to have 1_1 and 1_2 triggered whenever I select "Fault" as type, how can I do that?

Thanks in advance.

Cheers,

Sofian.

 

 

 

  66518   Wed Aug 19 11:54:52 2009 Reply Johannes LieglJohannes.Liegl@gefanuc.comQuestionAll2.7.5Re: Multiple keyword search

Yoichi Aso wrote:
Hi,
I have a question regarding how to perform a multiple-keyword search.
For example, when I want to find entries which contain two keywords "abc" and "def" in the body text but in an unknown order,
one way I came up with was to use a regular expression like this.
(abc|def).*(abc|def)
But this will also match entries containing two "abc" or two "def".
The following one will eliminate this problem.
(abc.*def)|(def.*abc)
But when I use more than two keywords, this type of regular expressions becomes very long (because I have to list all the permutations of the keywords) and it may not fit in the search text field (there seems to be a limit on the length of the search text).

Is there any way to allow multiple-keyword search easily ?
It would be nice if I can just enter two or more keywords separated by white spaces and elog finds entries containing all the keywords.

Thanks,
Yoichi


Dear Yoichi,

well we are facing the same problem and I would like to ask you if you have been able finding another method searching for keywords in documents?

I am looking forward to getting feedback. Thank you very much for your help in advance.

Best Regards
Johannes Liegl
Goto page Previous  1, 2, 3 ... 399, 400, 401 ... 806, 807, 808   Next  
ELOG V3.1.5-3fb85fa6