Let me report when I see this behaviour.

If I use a text editor on elog.cfg directly, while elog is running, then when I save the file, the new elog.cfg is in place,

but the running elog is still running with the old configuration.  You have to restart elog for it to read the new config file and

use the new settings.

This does not apply if you edit elog.cfg via the "config" option in the menu command, where elog will read the new elog.cfg

just after it has been saved.

The reason I sometimes edit the file directly is if I want to create a new logbook, but with all the configuration of another logbook,

and it's quickest to cut-and-paste,  change the heading, create a new directory and restart elog.

This may be completely off what is being reported.

Minor changes you do externally to the elogd.cfg file are reflected immediately under Windows (under Linux you have to send a HUP signal to the process to re-read the configuration). But if you make major changes like adding a new logbook, you have to restart elogd. 

Yes, exactly!
I prefer to use the elog.cfg for change my config.

But, How do you do for restar the elogd ? with Unregister ELOG server service ?

Anyway, thanks for yours answers !

Bob

I am moving from a Hyper-V host to a VMware host and created a new elog server. I installed the elog software and did an rsync to get the .cfg file and logbooks to the new server.

rsync -av root@old.elog.server:/usr/local/elog /usr/local/
 

On the new server all of the 2020 entries are missing and there does not appear to be a 2020 logbook on either server but I can still access the 2020 entries on the old server. Where might they be and how do I get them over to the new server.

Old server says version is ELOG V3.1.4-unknown and new server says version is ELOG V3.1.4-966e3dd

Bothe servers a fully updated CentOS 7.

Start your new server interactively with "elogd -v 3" to see all verbose output. You will then see how it indexes all logbooks. If not, you might have a wrong path in elogd.cfg

On the new server in the logbook that should have several 2020 entries it stops on the last entry of 2019.

On the old server after stopping elogd i get:

/usr/sbin/elogd -v 3

Cannot open "elogd.cfg": No such file or directory

Are the files supposed to be in /usr/local/elog or /usr/share/elog? I have both on the old server. I only synced /usr/local/elog to the new server. In any case the Logbook with 2020 entries does not show a 2020 directory.

My backup system also does not show any 2020 logbook directories. It was current up to this week when I started this process.

You can put your files where ever you want, just tell elogd where to find the elogd.cfg file via the "-c" flag. Then tell elogd where to find files in the elogd.cfg file via the "Logbook dir" and "Resource dir" directives.

Stefan

Thank-you. That is good information to have. 

What is the default if you you do not specify anything in elogd.cfg? I assume it is  /usr/local/elog otherwise it would not see the existing logbooks.

With a default Linux RPM install, where else would the logbooks be? Still looking for a 2020 directory on either server.

Bruce