| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
66621
|
Tue Nov 17 19:31:46 2009 |
 | Heinzmann | catman333@web.de | Bug report | Windows | 2.7.7 2246 | Re: Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5 |
| David Spindler wrote: |
|
| Stefan Ritt wrote: |
|
| David Spindler wrote: |
|
I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems with the same logbook. I repeated the upgrade to 2.7.7 with the crash problem returning. I am now back on 2.7.5 with no problems.
I just decided to try 2.7.6 rev 2239 and had the same results as 2.7.7.
This is running under Win2K with SP4 as an automatic service on port 80.
I am also running Elog V2.7.4-2118 on a different port (8080) simultaneously with no problems.
If you wish I will send the elog.cfg file. Anything else I can do to help, please let me know.
|
I need to reproduce your problem. Therefore I need the configuration and the xxxxxxa.log file containing the offending entries. You can strip it down to the minimum needed to do the crash.
|
In the process of trying to reduce it to a minimum I discovered that the entry that appears to be causing the crash is this:
|
Hi,
I´m using 2.7.7 rev 2246 and tested it with my logbooks without any problems. But today I had no chance to reach them anymore. Strange.
Regards,
Michael
|
|
66624
|
Fri Nov 20 19:32:22 2009 |
| David Spindler | dsspindler@gmail.com | Bug report | Windows | 2.7.7 2246 | Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5 |
| David Spindler wrote: |
|
| Stefan Ritt wrote: |
|
| David Spindler wrote: |
|
I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems with the same logbook. I repeated the upgrade to 2.7.7 with the crash problem returning. I am now back on 2.7.5 with no problems.
I just decided to try 2.7.6 rev 2239 and had the same results as 2.7.7.
This is running under Win2K with SP4 as an automatic service on port 80.
I am also running Elog V2.7.4-2118 on a different port (8080) simultaneously with no problems.
If you wish I will send the elog.cfg file. Anything else I can do to help, please let me know.
|
I need to reproduce your problem. Therefore I need the configuration and the xxxxxxa.log file containing the offending entries. You can strip it down to the minimum needed to do the crash.
|
In the process of trying to reduce it to a minimum I discovered that the entry that appears to be causing the crash is this:
|
Sorry for the delay.
1: The offending log file.
|
|
66640
|
Mon Dec 7 21:25:23 2009 |
| David Spindler | dsspindler@gmail.com | Bug report | Windows | 2.7.7 2246 | Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5 |
| David Spindler wrote: |
|
| David Spindler wrote: |
|
| Stefan Ritt wrote: |
|
| David Spindler wrote: |
|
I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems with the same logbook. I repeated the upgrade to 2.7.7 with the crash problem returning. I am now back on 2.7.5 with no problems.
I just decided to try 2.7.6 rev 2239 and had the same results as 2.7.7.
This is running under Win2K with SP4 as an automatic service on port 80.
I am also running Elog V2.7.4-2118 on a different port (8080) simultaneously with no problems.
If you wish I will send the elog.cfg file. Anything else I can do to help, please let me know.
|
I need to reproduce your problem. Therefore I need the configuration and the xxxxxxa.log file containing the offending entries. You can strip it down to the minimum needed to do the crash.
|
In the process of trying to reduce it to a minimum I discovered that the entry that appears to be causing the crash is this:
|
Sorry for the delay.
1: The offending log file.
|
I know it looks like I am totally inept. I apologize. Obviously I was in a hurry the last couple of posts.
Ok, let's try this again.
The offending log file:
|
|
66652
|
Thu Dec 10 18:12:19 2009 |
| David Spindler | dsspindler@gmail.com | Bug report | Windows | 2.7.7 2246 | Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5 |
| David Spindler wrote: |
|
| David Spindler wrote: |
|
| David Spindler wrote: |
|
| Stefan Ritt wrote: |
|
| David Spindler wrote: |
|
I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems with the same logbook. I repeated the upgrade to 2.7.7 with the crash problem returning. I am now back on 2.7.5 with no problems.
I just decided to try 2.7.6 rev 2239 and had the same results as 2.7.7.
This is running under Win2K with SP4 as an automatic service on port 80.
I am also running Elog V2.7.4-2118 on a different port (8080) simultaneously with no problems.
If you wish I will send the elog.cfg file. Anything else I can do to help, please let me know.
|
I need to reproduce your problem. Therefore I need the configuration and the xxxxxxa.log file containing the offending entries. You can strip it down to the minimum needed to do the crash.
|
In the process of trying to reduce it to a minimum I discovered that the entry that appears to be causing the crash is this:
|
Sorry for the delay.
1: The offending log file.
|
I know it looks like I am totally inept. I apologize. Obviously I was in a hurry the last couple of posts.
Ok, let's try this again.
The offending log file:
|
Ok, I am now assuming the offending log file has been removed. Correct? |
|
66653
|
Thu Dec 10 19:06:18 2009 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Windows | 2.7.7 2246 | Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5 |
| David Spindler wrote: |
|
Ok, I am now assuming the offending log file has been removed. Correct?
|
No, you never submitted any file. It was missing in all your posts. In worst case send it by email to me. |
|
66496
|
Thu Aug 6 11:40:11 2009 |
 | soren poulsen | soren.poulsen@cern.ch | Bug report | Linux | 2.7.7 | HTML in attribute values |
Hi,
I am using syntax like (from the doc):
Display Telephone = <a href="http://any.company.com/telbook.cgi?search=$Name">$Name's telephone number</a>
Until yesterday this was interpreted as HTML.
After upgrading to 2.7.7, I still get a valid link but the full HTML code is also displayed: the user sees
''<a href="http://any.company.com/telbook.cgi?search=myname">myname's telephone number</a>''
where he should only see:
''myname's telephone number''
I am 99% sure this is a consequence of the upgrade. Is there a way to get the original behaviour back?
Thanks a lot
Soren Poulsen
|
|
66497
|
Thu Aug 6 11:53:29 2009 |
| soren poulsen | soren.poulsen@cern.ch | Bug report | Linux | 2.7.7 | Re: HTML in attribute values |
| soren poulsen wrote: |
|
Hi,
I am using syntax like (from the doc):
Display Telephone = <a href="http://any.company.com/telbook.cgi?search=$Name">$Name's telephone number</a>
Until yesterday this was interpreted as HTML.
After upgrading to 2.7.7, I still get a valid link but the full HTML code is also displayed: the user sees
''<a href="http://any.company.com/telbook.cgi?search=myname">myname's telephone number</a>''
where he should only see:
''myname's telephone number''
I am 99% sure this is a consequence of the upgrade. Is there a way to get the original behaviour back?
Thanks a lot
Soren Poulsen
|
I have more precise information about the nature of this issue, which concerns the display of E-logs
In the previous version 2.7.6, E-log would generate HTML like this:
td class="attribvalue">
<a href="https://edms.cern.ch/camms/plsql/d7i_report_CV_WO_VIEW.form_7?event=15403690&button=Search">15403690</a> </td>
In the latest version 2.7.7, E-log generates HTML like this (for the same attribute):
<td class="attribvalue">
<a href="<a href="https://edms.cern.ch/camms/plsql/d7i_report_CV_WO_VIEW.form_7?event=15575045&button=Search">https://edms.cern.ch/camms/plsql/d7i_report_CV_WO_VIEW.form_7?event=15575045&button=Search</a>">15575045</a> </td>
Soren Poulsen
|
|
66498
|
Thu Aug 6 12:11:50 2009 |
| Stefan Ritt | stefan.ritt@psi.ch | Bug report | Linux | 2.7.7 | Re: HTML in attribute values |
| soren poulsen wrote: |
|
| soren poulsen wrote: |
|
Hi,
I am using syntax like (from the doc):
Display Telephone = <a href="http://any.company.com/telbook.cgi?search=$Name">$Name's telephone number</a>
Until yesterday this was interpreted as HTML.
After upgrading to 2.7.7, I still get a valid link but the full HTML code is also displayed: the user sees
''<a href="http://any.company.com/telbook.cgi?search=myname">myname's telephone number</a>''
where he should only see:
''myname's telephone number''
I am 99% sure this is a consequence of the upgrade. Is there a way to get the original behaviour back?
Thanks a lot
Soren Poulsen
|
I have more precise information about the nature of this issue, which concerns the display of E-logs
In the previous version 2.7.6, E-log would generate HTML like this:
td class="attribvalue">
<a href="https://edms.cern.ch/camms/plsql/d7i_report_CV_WO_VIEW.form_7?event=15403690&button=Search">15403690</a> </td>
In the latest version 2.7.7, E-log generates HTML like this (for the same attribute):
<td class="attribvalue">
<a href="<a href="https://edms.cern.ch/camms/plsql/d7i_report_CV_WO_VIEW.form_7?event=15575045&button=Search">https://edms.cern.ch/camms/plsql/d7i_report_CV_WO_VIEW.form_7?event=15575045&button=Search</a>">15575045</a> </td>
|
You need
Allow HTML = 1
in your configuration file. See the documentation for details. This featue is new in 2.7.7. |