> > 2) /etc/init.d/elogd: line 10: /etc/rc.d/init.d/functions: No such file or directory (I fixed this by commenting
> > out that line).
> > 
> > 3) Starting elogd: /etc/init.d/elogd: line 34: echo_success: command not found (Fixed by search/replace "echo_"
> > to "echo ").
> 
> The elogd (or elogd.init in the distribution) is written for RedHat based systems where echo_success gives the 
> typical output with a green [OK] at the end of the line. For Debian, there is (was) in principle a Debian package 
> which has it's own startup script. Since the package maintainer is not active any more (I guess), the Debian 
> updates are heavily old. Once elog gets managed inside Debian again, that should get better again, but until then 
> one has to follow 2) and 3) from above. If I would remove it, the Scientific Linux users would complain. 

I'm actually using elog on Debian and have been rolling my own ".deb" for a while now (starting with the old Debian
one and working my way up till 2.7.5). Maybe you could add the Debian /etc/init.d/elog script to the "contrib"
directory, with a suitable note in the README or something like that? That script has not changed in a long time and
is still functional - and doing so would make it easier for people who would like to install elog on a Debian (or
Debian-based, e.g. Ubuntu) system. I'll attach the script.

Regards,

Thomas

A problem recently developed for our elog...after running without much problem the elog daemon was restarted on an ubuntu server running apache2. Now the server gives 502 Proxy Error messages:

Proxy Error

The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /elog.

Reason: Error reading from remote server

I did a force-reload of apache after making sure the modules are enabled. I also restarted elogd but to no avail. One symptom seems to be that the GET request is empty...that is before it was:

"GET /elog/sample_elog/etcetera HTTP/1.1"

but now it is just

"GET /elog HTTP/1.1"

Just started out of the blue...

Any ideas?

 I have a similar problem when I restart the elogd daemon. To fix that, I usually also restart Apache.

	reload)
		# Do nothing since ELOG daemon responds to 
		# the changes in conffile directly.
		;;

    reload)
        if [ -f $PIDFILE ]; then
            echo -n "$DESC to reread config file ... "
            kill -HUP `cat "$PIDFILE"`
            echo "done"
        else
            echo "No $PIDFILE found!"
        fi
        ;;

When submitting entries via the elog client, I find that I can set arbitrary values for attributes that are supposedly "preset" and "locked".

As an example, I have in my elogd.cfg file:

[global]

...

Group Operations = Accelerator

Top group ATLAS = Operations

...

[global ATLAS]

Attributes = Experiment, Author, Author Email, Category, Subject
Required Attributes = Category, Subject
Options Category = Routine entry, Shift summary, Problem, Fix, Question, Info, Other
Extendable Options = Category

Preset Experiment =
Preset Author = $long_name
Preset Author Email = $user_email
Locked Attributes = Experiment, Author, Author Email

...

[Accelerator]
Attributes = Author, Author Email, Category, Subject
Options Category = Routine entry, Shift summary, Problem, Fix, Question, Info, Other

...

This works as intended with a web client (firefox). The Author and Author Email attributes are preset and unchangeable.

However, if I use the elog client, as in:

elog -v -h my.apache-proxy.server -d elog -l Accelerator -p 443 -s -u johndoe xxxxx -a Category=LN -a Subject=Test -a Author=IDoNotExist -n 1 -m entry.txt 
(johndoe is an existing user)

 

The entry is created with "IDoNotExist" as the Author name, instead of the correct name for the user johndoe,
and the Author Email attribute is blank.

Is there a way to enforce preset and locked attributes in the elogd server? (As a client could connect
with any arbitrary software, not just elog.)

I went to upgrade to the new version of elog I receive a error message that is.

error: Failed dependencies:
	libssl.so.6 is needed by elog-2.7.5-1.i386
	rtld(GNU_HASH) is needed by elog-2.7.5-1.i386

Do I need these dependencies for elog to work? If I do need them where do I get them for Suse 10.2.

Thank you for any help.

Carl

Hi

Thanks for elog - it's a brilliant piece of software.  I'd looked all over for open source software to log/manage change requests before discovering elog; it's so flexible that I've been able to do everything I need with it.

However, I think that I've just discovered my first undocumented 'feature'.  Attribute names containing punctuation characters (e.g. / and :) cause "Redirection limit for this URL exceeded" errors in Firefox 3.0.2 and corrupt the URL if they're used in a Quick Filter.  I often use '/' in attribute names for brevity, e.g. "Old/New Versions" but hadn't used one in a Quick Filter before.

keep up the good work.

regards

Steve

Hi

I've just upgraded to 2.7.5 mainly because I wanted to have Museremail sorted.  We use this to list contacts on an RFC form and it's much easier to find the ones you want when they are in a predictable sequence.  As an extension to this it would be great if they could be sorted by the last part of their real name - typical user, give him a sweetie and he wants jam on it!

cheers

Steve