Re: Installing Elog on Linux Oracle 9 and missing libssl.so.10, posted by Laurent Jean-Rigaud on Fri Feb 3 15:51:07 2023
|
Hi Daniel,
The RPM has been build for EL7 so SSL share libs should be different with the one provided by EL9. :-)
Try to rebuild from tarball source with enclosed buildrpm script (or with elog srpms if you find any : rpm -i elog*.src.rpm && vim ~/rpmbuild/SPEC/elog.spec |
|
Re: Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 18:59:30 2016
|
I attempted instead to build from the tar ball, and, except for a "fatal" git error, make built elogd, elog, and elconv. I put
the first in /usr/local/sbin, and the latter two in /usr/local/bin, and then restarted elogd, but this didn't work:
Service Temporarily Unavailable |
|
Re: Installation: Failed Dependencies, posted by Phil Rubin on Fri Mar 11 19:24:11 2016
|
OK. I found the source of the logbook problem in an exchange from May 2015, so no need to answer this one.
But I would like to be able to upgrade to 3.x from 2.9, so any help with this will be much appreciated.
Phil |
|
Re: Installation: Failed Dependencies, posted by Darren Hollinrake on Sat Mar 19 15:24:29 2016
|
I did the following on CentOS 6.7 (Should work for Fedora and RHEL as well):
yum install -y wget
wget http://midas.psi.ch/elog/download/RPMS/elog-latest.i386.rpm |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Thu Mar 21 19:30:49 2024
|
Hi Nina,
The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does
not take care of dependencies. |
|
Re: Installation with amp on Rocky Linux, posted by Stefan Ritt on Fri Mar 22 07:41:56 2024
|
Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically
installed:
Dependencies Resolved |
|
Re: Installation with amp on Rocky Linux, posted by Laurent Jean-Rigaud on Sat Mar 23 23:51:37 2024
|
Normally it should work. Requirements are set in SPEC file.
$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh |
|
Re: Installation with amp on Rocky Linux, posted by scott on Mon Mar 25 10:18:55 2024
|
Is there an RPM available for Rocky 8 or Rocky 9?
And checking over https://elog.psi.ch/elog/download/RPMS/ , only el7 is found. Is that the right place to look for EL8 or EL9 based RPM? |