Hello,

I  tried to install Elog 3.1.4 from rpm on Oracle Linux 9 with command:

sudo dnf localinstall elog-3.1.4-3.el7.x86_64.rpm

But I got error:

Last metadata expiration check: 0:08:06 ago on Thu 02 Feb 2023 10:35:13 CET.
Error:
 Problem: conflicting requests
  - nothing provides libssl.so.10()(64bit) needed by elog-3.1.4-3.el7.x86_64
  - nothing provides libssl.so.10(libssl.so.10)(64bit) needed by elog-3.1.4-3.el7.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)

Using dnf I installed libssl.so.11 (cannot find version 10) and it doesn't help. So my question is: can I use one of proposes by dnf solution as:

1. --skip-broken
2. --nobest

Does Elog will work stabilityy after that?

Best Regards

Is there anything I can do about this?

kernel:  2.6.32-279.14.1.el6.x86_64

ldd (GNU libc) 2.12

/lib64/libc.so.6

/usr/lib64/libssl.so.10

rpm -i elog-latest.i386.rpm

error: Failed dependencies:

libc.so.6 is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386

libssl.so.6 is needed by elog-3.1.1-1.i386

I attempted instead to build from the tar ball, and, except for a "fatal" git error, make built elogd, elog, and elconv.  I put the first in /usr/local/sbin, and the latter two in /usr/local/bin, and then restarted elogd, but this didn't work:

Service Temporarily Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

So, I backed these out and restored the previous executables, and access to the elog was restored, and the elogd.cfg accessed is the original one, but all logbooks are empty and requiring authentication.  The logbook directories still contain all the old entries, so I'm not sure what has happened.

Thanks for your advice.

Phil

Is there anything I can do about this?

kernel:  2.6.32-279.14.1.el6.x86_64

ldd (GNU libc) 2.12

/lib64/libc.so.6

/usr/lib64/libssl.so.10

rpm -i elog-latest.i386.rpm

error: Failed dependencies:

libc.so.6 is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.0) is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.1) is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.1.3) is needed by elog-3.1.1-1.i386

libc.so.6(GLIBC_2.3) is needed by elog-3.1.1-1.i386

libssl.so.6 is needed by elog-3.1.1-1.i386

Hello all,

I am installing elog on an Rocky Linux instance. Have dependensy problem. 

rpm -Uvh elog-latest.el7.x86_64.rpm 

error: Failed dependencies:

    liblber-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libldap-2.4.so.2()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10()(64bit) is needed by elog-3.1.5-1.el7.x86_64

    libssl.so.10(libssl.so.10)(64bit) is needed by elog-3.1.5-1.el7.x86_64

Any clues from developers to resolve it and keep the software working. Thank you in advance!

Bests, Nina

Hi Nina,

The RPM is built with Kerberos (libber*), LDAP (libldap*) and SSL (libssl*) options. These libs are missing on your system, and rpm command does not take care of dependencies.

 Try to install with yum : yum install elog-latest.el7.x86_64.rpm

Normally the missing rpm files should be dlded from RL repo if your host can access to them...

.

Laurent

Is there a way to install all dependencies automatically? Like if I install a package like "emacs" I get a list of dependencies with are automatically installed:

Dependencies Resolved

====================================================================================================================================
 Package                          Arch                       Version                                Repository                 Size
====================================================================================================================================
Updating:
 emacs                            x86_64                     1:24.3-23.el7_9.1                      rhel7                     2.9 M
Updating for dependencies:
 emacs-common                     x86_64                     1:24.3-23.el7_9.1                      rhel7                      20 M

Transaction Summary
====================================================================================================================================
Upgrade  1 Package (+1 Dependent package)

Total download size: 23 M
Is this ok [y/d/N]:

Normally it should work. Requirements are set in SPEC file.

$ rpm -qpi --requires elog-3.1.5-20240226.el7.x86_64.rpm
/bin/sh
/bin/sh
/bin/sh
config(elog) = 3.1.5-20240226.el7
krb5-libs
libc.so.6()(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.15)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libc.so.6(GLIBC_2.3.4)(64bit)
libc.so.6(GLIBC_2.4)(64bit)
libc.so.6(GLIBC_2.8)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libkrb5.so.3()(64bit)
libkrb5.so.3(krb5_3_MIT)(64bit)
liblber-2.4.so.2()(64bit)
libldap-2.4.so.2()(64bit)
libm.so.6()(64bit)
libpam.so.0()(64bit)
libpam.so.0(LIBPAM_1.0)(64bit)
libssl.so.10()(64bit)
libssl.so.10(libssl.so.10)(64bit)
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(GLIBCXX_3.4)(64bit)
openldap >= 2.4.1
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rtld(GNU_HASH)
rpmlib(PayloadIsXz) <= 5.2-1

The EL7 binary needs the following RPM :

$ ldd /usr/local/sbin/elogd | awk '{print $1}' | while read r ; do rpm -qf /lib64/$r ; done | sort -u
erreur�: fichier /lib64/linux-vdso.so.1�: Aucun fichier ou dossier de ce type
erreur�: fichier /lib64/lib64/ld-linux-x86-64.so.2�: Aucun fichier ou dossier de ce type
audit-libs-2.8.5-4.el7.x86_64
cyrus-sasl-lib-2.1.26-24.el7_9.x86_64
glibc-2.17-326.el7_9.x86_64
keyutils-libs-1.5.8-3.el7.x86_64
krb5-libs-1.15.1-55.el7_9.x86_64
libcap-ng-0.7.5-4.el7.x86_64
libcom_err-1.42.9-19.el7.x86_64
libgcc-4.8.5-44.el7.x86_64
libselinux-2.5-15.el7.x86_64
libstdc++-4.8.5-44.el7.x86_64
nspr-4.35.0-1.el7_9.x86_64
nss-3.90.0-2.el7_9.x86_64
nss-softokn-freebl-3.90.0-6.el7_9.x86_64
nss-util-3.90.0-1.el7_9.x86_64
openldap-2.4.44-25.el7_9.x86_64
openssl-libs-1.0.2k-26.el7_9.x86_64
pam-1.1.8-23.el7.x86_64
pcre-8.32-17.el7.x86_64
zlib-1.2.7-21.el7_9.x86_64

Almost all of them are installed by ELOG RPM or are already installed by default Redhat profiles.

Nina, do you use right RPM version (el7/8/9) according to Rockylinux one ? El7 rpm can not be installed on RL9...

Bye