Re: Implementation of RSS feeds, posted by Matthew on Tue Jan 4 00:55:26 2005
|
The <pubDate> item doesn't appear to be a valid RFC-822 date. Causes some
aggregators to fail when parsing.
The error is shown by Feedvalidator:
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Fmidas.psi.ch%2Felogs%2FForum%2Felog.rdf
> I implemented experimentally RSS feeds into Elog. Before releasing this new
> addition, I would like to collect some experience with it. This forum now
> supports RSS feeds, for which you can subscribe with a RSS feed reader like
> Mozilla Firefox. Please give it a try and send me any feedback.
>
> For an introduction to RSS feeds, please see
>
> http://www.webreference.com/authoring/languages/xml/rss/intro/
>
> To subscribe to a logbook, enter following URL into your RSS reader:
>
> http://<your-elog-host.domain>/<logbook>/elog.rdf
>
> From the newest Mozilla Firefox browser, you can also click on the RSS box at
> the lower right corner of the browser (see attachment). |
Re: Implementation of RSS feeds, posted by Stefan Ritt on Tue Jan 4 11:38:43 2005
|
> The <pubDate> item doesn't appear to be a valid RFC-822 date. Causes some
> aggregators to fail when parsing.
I fixed that, now it passes the Feedvalidator. New version is under CVS. |
|
Re: Images in notifications, posted by Stefan Ritt on Fri Feb 8 14:57:05 2019
|
Your observation is correct. The mailer inside elog should scan all email bodies and replace all <img> tags correctly. I put that on my todo list.
Stefan
| Patrick Sizun wrote: |
|
Hello,
I am using Elog v3.1.1. When entries contain embedded images, these images are attached to the email notifications but are not properly displayed in the body of the email.
Is it expected?
For example, with an image file myimage.png the email source code contains <img alt="" height="150" src="190208_143305/myimage.png.png" width="200">
Maybe the email should make use of the Content-ID of the attached image?
|
|
|
Re: Imagemagick not working on Ubuntu, posted by Konstantin Olchanski on Thu Apr 25 02:11:08 2024
|
Please see https://daq00.triumf.ca/DaqWiki/index.php/Ubuntu#Enable_elog_PDF_preview
see https://stackoverflow.com/questions/52998331/imagemagick-security-policy-pdf-blocking-conversion
xemacs -nw /etc/ImageMagick-6/policy.xml
remove this section at the end:
<!-- disable ghostscript format types -->
<policy domain="coder" rights="none" pattern="PS" />
<policy domain="coder" rights="none" pattern="PS2" />
<policy domain="coder" rights="none" pattern="PS3" />
<policy domain="coder" rights="none" pattern="EPS" />
<policy domain="coder" rights="none" pattern="PDF" />
<policy domain="coder" rights="none" pattern="XPS" />
K.O. |
|
Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 10:36:17 2016
|
Can anyone help me? I'm really clueless 
Thanks in advance,
Antonio
| Antonio Bulgheroni wrote: |
|
Dear all, sorry for asking you another question, but today after I finally recovered all my logbook entries, I updated to elog 3.1.1 and now I have a problem uploading images.
This is what I do:
- Click on the insert "Image" button in the editor toolbar
- In the popup window I select the picture I want to upload and then press "Send to server". I see the file appearing among the attachments at the bottom of the message.
- I click OK, but the popup complains that the Image Source URL is missing. Indeed when I switch to the other tab the URL field is open.
I have tried on your demo logbook and after the image is sent to the server, the URL field is automatically filled.
What am I doing wrong? With 2.9.2 it was working normally.
Thanks again and best regards
Antonio
|
|
Re: Image source url missing, posted by Stefan Ritt on Mon Aug 22 11:24:07 2016 
|
I entered this image exactly as you described. When I click OK, the dialog disappears. Can you check if it works for you on this server? Maybe with different browsers?
Stefan
| Antonio Bulgheroni wrote: |
|
Can anyone help me? I'm really clueless
Thanks in advance,
Antonio
| Antonio Bulgheroni wrote: |
|
Dear all, sorry for asking you another question, but today after I finally recovered all my logbook entries, I updated to elog 3.1.1 and now I have a problem uploading images.
This is what I do:
- Click on the insert "Image" button in the editor toolbar
- In the popup window I select the picture I want to upload and then press "Send to server". I see the file appearing among the attachments at the bottom of the message.
- I click OK, but the popup complains that the Image Source URL is missing. Indeed when I switch to the other tab the URL field is open.
I have tried on your demo logbook and after the image is sent to the server, the URL field is automatically filled.
What am I doing wrong? With 2.9.2 it was working normally.
Thanks again and best regards
Antonio
|
|
|
|
Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 12:00:32 2016
|
Dear Stefan, thanks for your answer.
I tried to add a picture to this reply but I got the same error message with both Firefox and Chrome.
For sure the pictures were not included in the message, but I have the feeling they were not even uploaded to the server.
(I'm on Windows 7)
Thanks for your help,
Antonio
| Stefan Ritt wrote: |
|
I entered this image exactly as you described. When I click OK, the dialog disappears. Can you check if it works for you on this server? Maybe with different browsers?
Stefan
| Antonio Bulgheroni wrote: |
|
Can anyone help me? I'm really clueless
Thanks in advance,
Antonio
| Antonio Bulgheroni wrote: |
|
Dear all, sorry for asking you another question, but today after I finally recovered all my logbook entries, I updated to elog 3.1.1 and now I have a problem uploading images.
This is what I do:
- Click on the insert "Image" button in the editor toolbar
- In the popup window I select the picture I want to upload and then press "Send to server". I see the file appearing among the attachments at the bottom of the message.
- I click OK, but the popup complains that the Image Source URL is missing. Indeed when I switch to the other tab the URL field is open.
I have tried on your demo logbook and after the image is sent to the server, the URL field is automatically filled.
What am I doing wrong? With 2.9.2 it was working normally.
Thanks again and best regards
Antonio
|
|
|
|
|
Re: Image source url missing, posted by Antonio Bulgheroni on Mon Aug 22 17:30:58 2016
|
Dear Stefan, this is to confirm that also from my personal laptop from home I have the same issue. No pictures uploaded to this server from windows 10.
Which OS & Browser are you using?
thanks,
Antonio
| Antonio Bulgheroni wrote: |
|
Dear Stefan, thanks for your answer.
I tried to add a picture to this reply but I got the same error message with both Firefox and Chrome.
For sure the pictures were not included in the message, but I have the feeling they were not even uploaded to the server.
(I'm on Windows 7)
Thanks for your help,
Antonio
| Stefan Ritt wrote: |
|
I entered this image exactly as you described. When I click OK, the dialog disappears. Can you check if it works for you on this server? Maybe with different browsers?
Stefan
| Antonio Bulgheroni wrote: |
|
Can anyone help me? I'm really clueless
Thanks in advance,
Antonio
| Antonio Bulgheroni wrote: |
|
Dear all, sorry for asking you another question, but today after I finally recovered all my logbook entries, I updated to elog 3.1.1 and now I have a problem uploading images.
This is what I do:
- Click on the insert "Image" button in the editor toolbar
- In the popup window I select the picture I want to upload and then press "Send to server". I see the file appearing among the attachments at the bottom of the message.
- I click OK, but the popup complains that the Image Source URL is missing. Indeed when I switch to the other tab the URL field is open.
I have tried on your demo logbook and after the image is sent to the server, the URL field is automatically filled.
What am I doing wrong? With 2.9.2 it was working normally.
Thanks again and best regards
Antonio
|
|
|
|
|
|