I would like to dump mylog files into comma/tab seperated files. Is there 
an easy way to do it?

I tried to run elconv, but had no success. Always returns an error. 

Thanks,
k. 

Since updating to version 2.5.8 we have been having problems with the elogd 
service crashing whenever anyone attempts to log out. We are using stunnel 
4.09 on a Win 2k system.

When someone tries to log out of e-log from their desktop the machine 
hosting the service throws an error popup wanting to report to Microsoft. 
The error signature has the following information:

szAppName: elogd.exe
szAppVer: 0.0.0.0
szModName: elogd.exe
szMidVer: 0.0.0.0
offset: 0003586a

Clicking to get the technical information it wants to send it shows these 
two file names:

C:\DocumentsandSettings\krobinde\LOCALS~1\temp\WER6F.tmp.dir00
\elogd.exe.mdmp
C:\DocumentsandSettings\krobinde\LOCALS~1\temp\WER6F.tmp.dir00\appcompat.txt

Let me know if there is any further information you need.

> It's hard to tell the problem from what you report. Have you tried the latest
> release http://midas.psi.ch/elog/download/windows/elog258-6.exe ? There were
> some problems with the password file in 2.5.8 versions prior to patch level 6.

Yes, I am up to date with the latest version (2.5.8-6).

What other information can I provide that might assist in diagnosing this?

> > Since updating to version 2.5.8 we have been having problems with the elogd 
> > service crashing whenever anyone attempts to log out. We are using stunnel 
> > 4.09 on a Win 2k system.
> 
> This problem has finally been identified and fixed. Please download the newest
> version 2.5.9-2 which contains this fix.

I will get right on this. Thank you for your efforts!

Hi

Tested this using the 2.6.1 version which comes packed with ubuntu-dapper and a 2.7.5 version I've compiled from source.

If I compile the 2.7.5 version from source and start it using

sudo /usr/local/sbin/elogd -c /usr/local/elog/elogd.cfg

config snippets below

---------------------------------

/usr/local/elog/elogd.cfg:

[global]
port = 8080
;url = http://solsikker.dmi.dk/elog/

[demo]
Theme = default
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type
------------------------------------

The icons show up !!

If I go through an apache proxy (config snippets below)

----------------------------------------

/usr/local/elog/elogd.cfg:

[global]
port = 8080
url = http://solsikker.dmi.dk/elog/

[demo]
Theme = default
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type

From apache conf

ProxyPass /elog/ http://solsikker.dmi.dk:8080/
ProxyPassReverse /elog/ http://solsikker.dmi.dk:8080/
<Proxy *>
        Order deny,allow
        allow from all
</Proxy>
-------------------------------------

The icons are missing !!!

The icons a showing up when using apache and the 2.6.1 elog version.

Best Regards

Rune

Dear All,

is it possible to write to the elog instead of the Command line throug a .dll

Best

MK

ssh -L 1234:your.server.name:8080 your.firewall.name
firefox http://localhost:1234/

http://your.server.name:8080/logbookname/080207_101110/Picture.jpg

http://localhost:1234/logbookname/080207_101110/Picture.jpg

Thank you for the quick support!

We use ELOG inside a local network, but we want to allow access also from outside the firewall.

The suggested solution from Elog Admin Guide worked fine until version ELOG V2.6.5-1844 (essentially without FCK Editor):

ssh -L 1234:your.server.name:8080 your.firewall.name
firefox http://localhost:1234/

Howerver, since the update to ELOG V2.7.1-2002 the FCK Editor uses absolute links to insert images.

An image uploaded from the local network will have an address like:

http://your.server.name:8080/logbookname/080207_101110/Picture.jpg

while the same image uploaded through the firewall tunnel will have a link like:

http://localhost:1234/logbookname/080207_101110/Picture.jpg

Obviously images uploaded from outside are not visible from inside and vice versa.

Is it possible to convince FCK Editor to use relative links?

PS
ELOG is great!!