Re: elog's image manipulation of .png file generated from a pdf/jpg, posted by Stefan Ritt on Mon Feb 11 14:21:05 2013
|
> Well I didn't crash the server this time, and I could invert the image in the demo logbook by doing two rotations.
> But, this is elog v2.9.0-2435, and I am using v2.9.2-2475. And I remember there was a recent issue about the image manipulation at some point, so I went to the
> download section to read the subversion listing to find where this occurred. But you've changed subversion! I couldn't find my way around it, so I not only could
> I find the changefile that showed what happened for each subversion issue, but even how I could download the current (or indeed any past) subversion issue.
>
> As far as I can recall, you made a change, I reported an issue, and you undid the change, or partially undid it. Do you know when this was? Could it be relivent?
I upgraded to V2.9.2, so please try again.
/Stefan |
|
Re: Protect Selection page=1, posted by Tom Langford on Mon Feb 18 20:12:25 2013
|
| Ocane wrote: |
|
Hi,
I have several top groups and each has several logbooks.
If I use the global option Protect Selection page=1 and Show top groups = 1, after an user logs in to the top group selection URL, the elog steers away from the top group selection page, and automatically brings him to the logbook selection page of the first top group. Is the elog programmed to exhibit this behavior?
What I would prefer is that, after an user logs in, the elog stays on the top group selection page, sine each user has his preferred destination, not always the logbooks in the first top group. Is there any setting I can use in the config file to do this?
(My users need to access different top groups and logbooks on regular basis).
Thank you and regards.
|
I am currently having a similar problem. I am migrating a few separate elogs to one new computer. I have three top groups set up with their own password files. If I log into top group A (TGA), and then try to go to top group B (TGB), I am presented with a "Create new user" screen for my login name for TGA. When I complete that form, I am taken to the user settings for top group A, rather than TGB. I can log out of TGA and then log into TGB fine, but if I try to switch between them without logging out, it freaks out.
There seems to be a problem with the cookies that keep me logged into the different top groups not recognizing that they are different entities. I'm running eLog 2.9.1 rev 436. Is it possible that this has been addressed in 2.9.2?
Thanks,
-t |
|
Re: Protect Selection page=1, posted by Stefan Ritt on Tue Feb 19 09:13:34 2013
|
| Tom Langford wrote: |
|
| Ocane wrote: |
|
Hi,
I have several top groups and each has several logbooks.
If I use the global option Protect Selection page=1 and Show top groups = 1, after an user logs in to the top group selection URL, the elog steers away from the top group selection page, and automatically brings him to the logbook selection page of the first top group. Is the elog programmed to exhibit this behavior?
What I would prefer is that, after an user logs in, the elog stays on the top group selection page, sine each user has his preferred destination, not always the logbooks in the first top group. Is there any setting I can use in the config file to do this?
(My users need to access different top groups and logbooks on regular basis).
Thank you and regards.
|
I am currently having a similar problem. I am migrating a few separate elogs to one new computer. I have three top groups set up with their own password files. If I log into top group A (TGA), and then try to go to top group B (TGB), I am presented with a "Create new user" screen for my login name for TGA. When I complete that form, I am taken to the user settings for top group A, rather than TGB. I can log out of TGA and then log into TGB fine, but if I try to switch between them without logging out, it freaks out.
There seems to be a problem with the cookies that keep me logged into the different top groups not recognizing that they are different entities. I'm running eLog 2.9.1 rev 436. Is it possible that this has been addressed in 2.9.2?
Thanks,
-t
|
Certainly 2.9.1 and 2.9.2 should behave similar in that respect. Have you tried to clear all cookies in your browser and try again?
/Stefan |
|
Re: Protect Selection page=1, posted by Stefan Ritt on Tue Feb 19 09:14:22 2013
|
| Ocane wrote: |
|
Hi,
I have several top groups and each has several logbooks.
If I use the global option Protect Selection page=1 and Show top groups = 1, after an user logs in to the top group selection URL, the elog steers away from the top group selection page, and automatically brings him to the logbook selection page of the first top group. Is the elog programmed to exhibit this behavior?
What I would prefer is that, after an user logs in, the elog stays on the top group selection page, sine each user has his preferred destination, not always the logbooks in the first top group. Is there any setting I can use in the config file to do this?
(My users need to access different top groups and logbooks on regular basis).
Thank you and regards.
|
There is currently no way to change this in the config file. I will review the issue when I get some time and maybe come up with a fix. |
|
Re: Multiple versions of elog on one server, posted by Andreas Luedeke on Thu Feb 21 13:41:25 2013
|
| David Pilgram wrote: |
|
| Chris Smith wrote: |
|
Is there a way of having multiple copies of elog running on one windows 2003 server? different ports?
I need to access 2 different elogd.cfg files.
|
[...] However, I was soon asked questions by Andreas as to how I found this running, as he had encountered problems with an earlier version. To be honest, that stopped me experimenting too far with this at that point, as well as a coincidental upgrading of my hardware. [...]
|
Just for completeness: I was running two elogd servers (2.9.0) on one Linux host in order to provide an english and a german web interface to the same logbooks, synchronised by the mirror server mechanism.
That didn't work out well, the elogd crashed infrequently. But of course mirror servers are not intended to run on the same host. Eventually I've just dropped the english server.
 ⇄
Detect language » English
|
any way to undelete entries?, posted by Mark Bergman on Thu Feb 21 23:23:19 2013
|
Is there any way within eLog to undelete entries? |
|
Re: any way to undelete entries?, posted by Stefan Ritt on Fri Feb 22 08:19:27 2013
|
| Mark Bergman wrote: |
|
Is there any way within eLog to undelete entries?
|
No. |
Re: any way to undelete entries?, posted by Andreas Luedeke on Fri Feb 22 10:58:18 2013 
|
| Mark Bergman wrote: |
|
Is there any way within eLog to undelete entries?
|
I wrote to scripts to backup the logbook files:
- elog_backup_daily creates a tar file of all new entries of the last 25 hours and keeps these backups for 90 days
- elog_backup_hourly creates a tar file of the entries of the last 65 minutes and keeks these backups for one week
- exclude-logbooks specifies which files not to backup
This allows you at least to recover deleted entries by hand as an administrator.
⇄
Detect language » English
⇄
Detect language » English
⇄
Detect language » English
|
|