Hi All,

I would like to have "Permis de verouillage et d'étiquetage 016685-68AF-0031" when I select it.

I don't found where can I make this change

thank you.

Hi all,

I have set my PC in Time Zone GMT+10:00 but I get GMT time in Entry time/Last edit field.

I have installed in another PC. Which has Time Zone GMT+10:00 but I still get GMT time in Entry time/Last edit field.

Please help. Thank you very much.

Hi, Stefan.  When someone using a satellite connection tries to upload an attachment *or* edit a long entry, it fails and they are presented
with an "Internal Server Error."  This is a huge improvement over the previous behavior of crashing elogd, but we were wondering if there is any
hope of improving this further so that one can edit large entries or upload attachments over a slow (in this case, satellite) connection.  Do
you have any ideas or plans on working on this further?  Apparently ELOG is the "only" service this user has trouble with from  home.

Any information you could provide would be greatly appreciated.

Many thanks,
Devin

> Hi, Stefan.  When someone using a satellite connection tries to upload an attachment *or* edit a long entry, it fails and they are presented
> with an "Internal Server Error."  This is a huge improvement over the previous behavior of crashing elogd, but we were wondering if there is any
> hope of improving this further so that one can edit large entries or upload attachments over a slow (in this case, satellite) connection.  Do
> you have any ideas or plans on working on this further?  Apparently ELOG is the "only" service this user has trouble with from  home.

There was a timeout of 1 sec. in the elogd daemon, which probably is too short for a satellite connection. Unfortunately I have no satellite here 
around to test it, so I "blindly" increased it to 6 seconds in the current SVN version. Please give it a try. You can increase this yourself, its here 
in the code at (Rev. 2291) line 28270:

   FD_ZERO(&readfds);
   FD_SET(_sock, &readfds);
   timeout.tv_sec = 6;            <----
   timeout.tv_usec = 0;
   status = select(FD_SETSIZE, (void *) &readfds, NULL, NULL, (void *) &timeout);

so you can change the 6 to 10 or so. The disadvantage of a large value is the following: Suppose you submit an entry, and in the middle of the 
submission your browser dies (or the user closes it). If you have a timeout of n seconds, the elogd server will wait that time until it closes the 
connection. During this waiting time is cannot respond to other request, so it might look dead. That's why we should not make it too long.

- Stefan

Hi Stefan,

> There was a timeout of 1 sec. in the elogd daemon, which probably is too short for a satellite connection. Unfortunately I have no satellite here 
> around to test it, so I "blindly" increased it to 6 seconds in the current SVN version. Please give it a try.

The latest release (2.8.0-2313) does fix this problem.  Our user is now able to modify entries and upload attachments using their satellite connection.

Thank you very much for your time and help.  I am sorry I didn't receive this in time to help test the old SVN version.

Sincerely,
Devin

Hi,I'm new here :) and want to install elog on linux suse. could you please tell me, how can I find this following lib dependency.

linuxsuse#rpm -i elogi386.rpm
                 error: Failed dependencies:
                  libssl.so.6 is needed by elog-3.1.0-2.i386

Thanks in Advance

When creating new logbooks, I will create a single entry to test the  
configuration. After revising the configuration I want to delete that  
single entry and create a new one based on the revised config.  
  
elogd will crash every time upon deleting that single entry with an  
xrealloc error. Here are the syslog entries leading up to the crash:  
  
Oct  9 08:09:41 obstin8 elogd[20614]:  
GET /Support/1?cmd=Delete&nextmsg=0&confirm=Yes HTTP/1.1^M Connection:  
Keep-Alive^M User-Agent: Mozilla/5.0 (compatible; Konqueror/3.3; Linux)  
(KHTML, like Gecko)^M Referer: http://localhost:8080/Support/1?cmd=Delete^M  
Accept: text/html, image/jpeg, image/png, text/*, image/*, */*^M  
Accept-Encoding: x-gzip, x-deflate, gzip, deflate^M Accept-Charset:  
iso-8859-1, utf-8;q=0.5, *;q=0.5^M Accept-Language: en^M Host:  
localhost:8080^M Cookie: urem=0; upwd=dDRubjNyBDI=; unm=mstolove  
Oct  9 08:09:41 obstin8 elogd[20614]: xrealloc: not enough memory  
  
This is on a Slackware 10 box using kernel 2.6.7. Elogd is accessed  
directly, not through an Apache proxy.  

Hi,

is there a way to set default preferences for text in entry text window, as regards : font type, font size, line spacing, paragraph, etc...

Thanks

Sara