number of entries in Login user list, posted by Janusz Szuba on Wed Jun 13 18:08:06 2018
|
Hi,
could it be possible to increase the limit of entries in Login user list from 100 to somewhat reasonably higher? Like twice or 3 times as
much. Similar limit exist also on Admin user list, which is afair 10, could this also be increased? |
Re: number of entries in Login user list, posted by Janusz Szuba on Thu Jun 14 13:07:32 2018
|
Thanks, good point, I was not sure that in case of other lists which will be changed as well, there will not be any problems, like overflow, etc.
Regarding admin list, now I remember, that was the limit to send email notification in case of registration requests. But actually it is not
important right now. |
|
bug in elog.spec, posted by Janusz Szuba on Mon Jul 6 19:09:48 2020
|
Hi,
in commit 1812e7c, specifying CFLAGS to make
command in elog.spec, renders all other settings in Makefile void. That is, if I want to include any of KRB5, LDAP, PAM support, and change makefile accordingly, |
|
Re: bug in elog.spec, posted by Janusz Szuba on Tue Jul 7 11:22:45 2020
|
Thanks for the answer, I will try with your specfile
best
Janusz |
Deny option and Guest commands, posted by Janusz Szuba on Mon Jul 19 18:41:29 2021
|
Hi,
I have a logbook with guest access and guest can also enter a new entry (in config: Guest List Menu commands = New, Find, Select, Login).
For other reason in a global section, I put |
|
"New User" option does not work when Authentication=Webserver, posted by Jan Just Keijser on Fri May 29 09:27:32 2020
|
Our setup uses "Authentication=Webserver" + no automatic user registration. Thus, logbook admins should add a user by clicking "Config"
and then "New user". However, no matter what they fill in in the "new user " dialog, as soon as they hit "Save" an error
pops up saying that their username (the admin one, not the new one) already exists. I found the following code: |
Re: "New User" option does not work when Authentication=Webserver, posted by Jan Just Keijser on Wed Aug 18 09:05:51 2021 
|
here's the patch that I use to enable use creation and deletion in combination with Webserver authentication.
The idea behind the patch is that if the user logged in via "http_user" is an elog admin, then {s}he is allowed to save a random
user configuration, including creating or deleting a user. |
Default "Author" when replying to a log entry, posted by Jan Just Keijser on Tue Feb 1 15:39:38 2022
|
what is the default value for "Author" when replying to a log entry ? I now see that for each reply to a log entry, the value of "Author"
is set to the value of the author of the original entry - this makes it very hard to see which user has replied to a particular log entry, especially when
users start replying to replies etc. |