401 Authorization problem, posted by Ian Stokes-Rees on Fri Dec 11 18:53:17 2009
|
Grrr. Forgetting to pick an icon means my message was blasted.
I have installed elog 2.7.8 and it is running. When I connect to it and get a login window, I am always denied. If I remove the passwords, then I can login with no password information. I have tried both command line for setting passwords and directly in the elogd.cfg file.
Suggestions on what I might be doing wrong would be appreciated.
Regards,
Ian
PS - are there RESTful interfaces to automate the generation of log entries via an HTTP POST or HTTP GET? |
|
Addition of a Print CSS, posted by Ian MacDonald on Mon Jan 15 09:56:09 2007
|
Is there any way to change the the embeded style sheet reference to allow a seperate style sheet for printing ?
Default config:-
<link rel="stylesheet" type="text/css" href="default.css">
Would like to configure to :-
<link rel="stylesheet" type="text/css" href="default.css media="screen">
<link rel="stylesheet" type="text/css" href="print.css" media="print">
Thanks |
|
How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 04:42:49 2016
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 09:39:07 2016
|
Hi Xuan Wu,
Nothing happen, I still got an error.
I can connect to server but cannot send
Do you have any more idea?
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Tue Nov 15 10:24:18 2016
|
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Wed Nov 16 07:07:35 2016
|
Hi Xuan Wu,
I got error from stunel as below.
2016.11.17 14:07:01 LOG5[0]: Service [gmail-smtp] accepted connection from 127.0.0.1:52473
2016.11.17 14:07:03 LOG3[0]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG3[0]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:09:02 LOG5[1]: Service [gmail-smtp] accepted connection from 127.0.0.1:52510
2016.11.17 14:09:03 LOG3[1]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG3[1]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:04 LOG5[2]: Service [gmail-smtp] accepted connection from 127.0.0.1:52569
2016.11.17 14:18:05 LOG3[2]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG3[2]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:25 LOG5[3]: Service [gmail-smtp] accepted connection from 127.0.0.1:52581
2016.11.17 14:18:26 LOG3[3]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG3[3]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
Do you know about these?
| Xuan Wu wrote: |
|
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
| I Gede Made Wira Saputra wrote: |
|
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
|
|
Re: How to configure email? "Error sending Email via <i>"127.0.0.1"</i>", posted by I Gede Made Wira Saputra on Fri Nov 18 01:50:26 2016
|
Thanks Xuan Wu, I hope Ludeke or Stefan see my problem.
| Xuan Wu wrote: |
|
Hi,
I'm sorry that I'm not familiar with the stunel. I came across email sending problem before. I created a email server in my own PC called postfix. Elog can use this email server to send email. Finally, I could use the email server from our institution. Maybe Luedeke or Stefan can help you.
| I Gede Made Wira Saputra wrote: |
|
Hi Xuan Wu,
I got error from stunel as below.
2016.11.17 14:07:01 LOG5[0]: Service [gmail-smtp] accepted connection from 127.0.0.1:52473
2016.11.17 14:07:03 LOG3[0]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG3[0]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:07:04 LOG5[0]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:09:02 LOG5[1]: Service [gmail-smtp] accepted connection from 127.0.0.1:52510
2016.11.17 14:09:03 LOG3[1]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG3[1]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:09:04 LOG5[1]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:04 LOG5[2]: Service [gmail-smtp] accepted connection from 127.0.0.1:52569
2016.11.17 14:18:05 LOG3[2]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG3[2]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:06 LOG5[2]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
2016.11.17 14:18:25 LOG5[3]: Service [gmail-smtp] accepted connection from 127.0.0.1:52581
2016.11.17 14:18:26 LOG3[3]: s_connect: connect 74.125.130.108:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG3[3]: s_connect: connect 74.125.130.109:465: Connection refused (WSAECONNREFUSED) (10061)
2016.11.17 14:18:27 LOG5[3]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
Do you know about these?
| Xuan Wu wrote: |
|
You can use command to test your email service and your username and password.
telnet your.email.host 25
ehlo hostname
auth login
(input your username) note that:the username and password should be generaterd by command perl -MMIME::Base64 -e 'print encode_base64 (“username”)’
(input your password)
Then you can test the server and username and password are right or not.
And you can set "Logging level = 3" elogd -v and see what is going on?
| I Gede Made Wira Saputra wrote: |
|
Hi Xuan Wu,
Nothing happen, I still got error. Do you have any more idea? I really confuse.
| Xuan Wu wrote: |
|
I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH
| I Gede Made Wira Saputra wrote: |
|
Hi All,
I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit
I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf
# My elogd.cfg
;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=
Email encoding = 1
Logout to main = 1
# My Stunnel.conf
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes
[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes
I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.
Could somebody help me?
Thanks,
|
|
|
|
|
|
|
SSL connection drop with large content, posted by HyonSan Seo on Mon Aug 10 07:56:43 2020
|
Dear all,
I had some difficulty to upload large files (>20MB) with SSL connection. I think it is also related to https://elog.psi.ch/elogs/Forum/68636
During debuging, I found that, when uploading large files, ssl connection is dropped since 'SSL_read' function returns -1.
But it doesn't alway mean broken connection. It may be "SSL_ERROR_WANT_READ".
I changed the "server_loop" function in the source code to "continue" when it is SSL_ERROR_WANT_READ. And it fixed the problem.
Here is my code.
## elogd.c "server_loop" function L30031
if (FD_ISSET(_sock, &readfds)) {
#ifdef HAVE_SSL
if (_ssl_flag){
i = SSL_read(_ssl_con, net_buffer + len, net_buffer_size - len);
if(i<=0){
int ssl_error=SSL_get_error(_ssl_con,i); ## check ssl error code
if(ssl_error==SSL_ERROR_WANT_READ||ssl_error==SSL_ERROR_WANT_WRITE) continue; ## if ssl wants more, continue
}
}
else
#endif
i = recv(_sock, net_buffer + len, net_buffer_size - len, 0);
I am ignorant about networking. Some experts on ssl connection would know a better way to deal with this problem.
Best,
HyonSan Seo
|