Where can I get more information about the config and themes file. I
downloaded the latest version (2.0.4) and the config file docs seem out of
date. I would like to get the icons working as well as getting the email to
work. The demo page at the elog home site shows both but I cannot find ant
references to the icons.

Is there a way to change the From address used when sending notifications 
from ELOG?   I was hoping there might be another attribute that would go 
along with the smtp host section.

Thanks,
Eric

does elog have a way of inserting pictures into a post other than including
them as an attachment? i can put a picture in using html text, but this
method only works if the picture is stored on the local server. anyone
placing a post from a remote machine cannot include a picture off of their
machine.
any help?
thanks.

Just compiled elog-2.0.5 under Solaris 8 and 9  without any warnings/errors
but the elogd binary just core dumps:

# /opt/ELOG/bin/elogd -c /opt/ELOG/elogd.cfg 
Indexing logbook "demo"...
Bus Error (core dumped)

.. tracing elogd shows:

[ lines snipped ]
2964:   brk(0x005B8A68)                                 = 0
2964:   ioctl(1, TCGETA, 0xFFBEE6BC)                    = 0
Indexing logbook "demo"...
2964:   write(1, " I n d e x i n g   l o g".., 27)      = 27
2964:       Incurred fault #5, FLTACCESS  %pc = 0x000164C0
2964:         siginfo: SIGBUS BUS_ADRALN addr=0x2F757372
2964:       Received signal #10, SIGBUS [default]
2964:         siginfo: SIGBUS BUS_ADRALN addr=0x2F757372
2964:           *** process killed ***
#

... any glue ?

Hello,
   If you have the text box turned off so you only enter attributes, is it 
possible to have a couple of attributes that have small scroll through text 
boxs of a couple of lines rather than just one line?   Like not as big as 
the regular text box but something small to be able to post a couple of 
lines in and if it gets bigger then you scroll down.  For instance if you 
are posting a problem and a solution just have one small text box for the 
problem and one for the solution.

Thanks,
Mo

When an entry is submitted with an required attribute missing one gets to 
the resubmit page. When you the click your browsers back button all 
previously filled attribute field are blank.

Is there a workaround to get the old text back?

used versions:
Elog 2.0.5
Netscape 4.76

Best regards,

Stefan

Hello,

Is there a possibility to prevent elog to overwrite attribute values when 
editing an old message? The old values are overwriten with the preset 
options for that attribute. 
But sometimes you will preserve attribute text and /or options from the old 
message.

Thank you for your help. Regards,

Stefan

> Ok, but is there a possibility to preserve the fields of the old message, 
but 
> still be able to edit it. This would be a nice feature in the case of an 
entry 
> with lots of attributes (set to something different then the preset 
values). 
> After submiting the message you realize : one option was wrong and now you 
> want to edit it without changing the other options again.
> Is this possible?

Actually this is a good idea. After thinking a while, I wonder if anybody at 
all would like not to preserve the preset values. So if nobody complains, I 
will set the behaviour such that elog always preserves the entries if one 
edits an existing message.