Many Thank's to Stefan for his work!!! He's doing a great job and is offering a better 
service than most comercial programs! Thank you very much Stefan!!! 
 
The new elogd.exe is now runniung 24h on my Windows 2003 Server without any problems. I made 
a little "stress" test too and there wasn't any problems at all. Also threaded view is 
working stable now. 
 
Is seems, that the new eleogd.exe uses a litle bit less of system rescources especially in 
theraded view mode. 
 
System specification for test: Pentium 4 2,4GHz, ASUS Motherboard, 480 MB RAM, SWAP File 1,1 
GB, Windows Server 2003 Enterprise Edition 5.2 including all paches until 15.3.04, IIS 6.0, 
Mercure Mail Server 4, McAffee Virus Scan & Firewall, ELOG 2.5.1 with new eleogd.exe runnig 
as service (system righs) with FireDaemon Lite 1.6GE. 
 
Please note that this problem has been occured under windows (reported for XP, 2000, 2003 
Server) only. Windows NT 4.0 is working well without the new eleodg.exe as well. 
 
 
> This problem has been fixed now, it was a programming bug. New version under 
>  
> http://midas.psi.ch/elog/download/windows/elogd.exe 
 
 

Hi,

the use of extendable options in the global section seem to "crash" elogd 
when creating a new entry.
My elogd.cfg is included
the problem attribute is "Client"
Should it be possible to have it extendable only in one specific logbook ?

Are extendable and conditionnal "compatible" on the same set of attributes ?

Cheers,
Marc

> the use of extendable options in the global section seem to "crash" elogd 
> when creating a new entry.
> My elogd.cfg is included
> the problem attribute is "Client"
> Should it be possible to have it extendable only in one specific logbook ?

Actually it was never foreseen to have extendable options in the [global]
section. I added now this functionality. The new windows version can be obtained
under

http://midas.psi.ch/elog/download/windows/elogd-snapshot.exe

Hi Stefan,

Many thanks, it works. I'm impressed by your reactivity ! thanks again.

Is it possible to have a conditionnal attribute depend on an extendanble one ?


> > the use of extendable options in the global section seem to "crash" elogd 
> > when creating a new entry.
> > My elogd.cfg is included
> > the problem attribute is "Client"
> > Should it be possible to have it extendable only in one specific logbook ?
> 
> Actually it was never foreseen to have extendable options in the [global]
> section. I added now this functionality. The new windows version can be obtained
> under
> 
> http://midas.psi.ch/elog/download/windows/elogd-snapshot.exe

> Is it possible to have a conditionnal attribute depend on an extendanble one ?

In principle yes, but I never tried it...

> > Is it possible to have a conditionnal attribute depend on an extendanble one ?
> 
> In principle yes, but I never tried it...

The snapshot version you sent me seems to be locked onto port 80 and does not honor 
the port directive in elog.cfg....

> The snapshot version you sent me seems to be locked onto port 80 and does not honor 
> the port directive in elog.cfg....

Thank you, I fixed that and updated the file.

> > The snapshot version you sent me seems to be locked onto port 80 and does not honor 
> > the port directive in elog.cfg....
> 
> Thank you, I fixed that and updated the file.

Tested and working, thx.