> Couldn't one include the extra <table> tag only when there is really more than
> one attribute per line.  All other lines could then be aligned properly.

Sure one can do a lot of things if one has enough time and not tens of other
requests on the wishlist which really concern some functionality and not just
cosmetics.

The elogd.cfg is attached in the previous message as attachement 3. Sorry it is a
little bit buried between pictures.
The reason I put the picture of the global elogd.cfg is to show that the not logged
user has access to elogd.cfg which is some kind of trouble...

> I just see your [global] part of elogd.cfg, could you send me the complete file?
> 

Hi I tried to remove the cookies and it still did not ask for password under 2.5.4.
Has the password file format changed between 2.5.2 and 2.5.3 ?

> What you also could try is to delete all cookies stored in your browser. The way
> cookies are formed changed between 2.5.2 and 2.5.3, so the system could be
> confused by old cookies.
> 
> - Stefan

Everything after curly parenthesis is ignored in attribute entry boxes 
like 'Subject' above

What I typed in the subject line was exatcly this:

  'curly parenthesis problem {abc}'

> Everything after curly parenthesis is ignored in attribute entry boxes 
> like 'Subject' above
> 
> What I typed in the subject line was exatcly this:
> 
>   'curly parenthesis problem {abc}'

Just don't use curly brackets (;-)

Nevertheless I fixed it in the current version (see subject)

Ok, now I see your problem. You defined a "Guest menu commands" which explicitly allows
not-authorized access (that's what it's for). If you only want to allow authorized
access, remove the "guest menu commands" from the logbook sections and also from the
[global] section.

Please note that if an option is not preent in a logbook section, it is looked for in
the [global] section. I see that most of your logbooks have similar settings. Just put
them into the [global] section, and override it in the logbook section if they are
different.

Thank you, I misunderstood how the "Guest menu commands" worked I thought I had to specify
a limited set of commands to actually limit guest users.

Thanks again for your wonderful work on this program too.

Regards,

Alexandre

> Ok, now I see your problem. You defined a "Guest menu commands" which explicitly allows
> not-authorized access (that's what it's for). If you only want to allow authorized
> access, remove the "guest menu commands" from the logbook sections and also from the
> [global] section.
> 
> Please note that if an option is not preent in a logbook section, it is looked for in
> the [global] section. I see that most of your logbooks have similar settings. Just put
> them into the [global] section, and override it in the logbook section if they are
> different.

I was trying to do some hard coded spaces using:

Thread display = For: $Date for Shutdown.   $DataCenter:
$short summary. Coordinator: $Shutdown Coordinator.

The spacing actually works mthe first time, but upon going back into editing
the config file, the coded spaces are gone, replaced with real spaces, and
when saved all real multiple spaces are, as one would expect, ignored.  The
spacing reverts back to normal.

I tried other html tags but these show up as literals.

Thanks

> I was trying to do some hard coded spaces using:
> 
> Thread display = For: $Date for Shutdown.   $DataCenter:
> $short summary. Coordinator: $Shutdown Coordinator.
> 
> The spacing actually works mthe first time, but upon going back into editing
> the config file, the coded spaces are gone, replaced with real spaces, and
> when saved all real multiple spaces are, as one would expect, ignored.  The
> spacing reverts back to normal.
> 
> I tried other html tags but these show up as literals.

I fixed that in revision 1.448. The problem also showed up even in normal
logbook entry displays and in replies (before this fix, the   in this text
whould not have shown up). Get the new version from CVS.