> Stefan, the validation still fails on the ampersand ...
> here is an example of your online Demo elog:
> http://validator.w3.org/check?verbose=1&uri=http%3A//midas.psi.ch/elogs/Forum/920

Ok, I fixed that, the validation link above show a valid page.

> - Irestarted the daemon
> - attached strace to it
> - requested the list for a testin logbook, few entries some quite big images 
>   (two thumbnails, the other are old images get resized my the browser)
> - repeted previous point a couple of times
> - press F5 (mozilla-firefox)  the browser hangs 4ever
> - stop the load
> - repeat point 3, all right
> - F5 => hangs
> - F5 => hangs

I tried to reproduce this problem, but everything was fine. This problem was never
reported by anyone else as well.

> It seems that uploading files with spaces in the name *now* works well... so the
> problem should be somewhere in the handling of existing attachments, not rised when
> the attachment is uploaded with the current version of elog ... it's quite strange

Can you send me one of this old xxxxxxa.log files which causes that crash, I can then fix
it in elogd.c ...

> > > Logins work OK if the username/password is valid.  However, if I try to login
> > > with invalid authentication, the server crashes.  If I turn off the protect
> > > selection page, then invalid authentication does not crash elogd.
> > 
> > Ok, it's me, Speedy Gonzales again (as Emiliano says... (;-))
> > 
> > I fixed that as well and committed the changes.
> 
> That seems to do the trick!  Thanks, Steve

Hi,
where can I find this correction for ELOG?
thanks a lot :o)

Hi,
I'am using Elog V2.5.8-1 and the "Preset Text" option don't work more since 
I've updated Elog. could you fix it?
Thanks.

Alex

> > > > Logins work OK if the username/password is valid.  However, if I try to login
> > > > with invalid authentication, the server crashes.  If I turn off the protect
> > > > selection page, then invalid authentication does not crash elogd.
> > > 
> > > Ok, it's me, Speedy Gonzales again (as Emiliano says... (;-))
> > > 
> > > I fixed that as well and committed the changes.
> > 
> > That seems to do the trick!  Thanks, Steve
> 
> Hi,
> where can I find this correction for ELOG?
> thanks a lot :o)

It's under CVS. You have to recompile the executable yourself, or you wait for the next
release (;-)

> I'am using Elog V2.5.8-1 and the "Preset Text" option don't work more since 
> I've updated Elog. could you fix it?

I tried with the example elogd.cfg and it worked there, so it must have to do
with your special configuration. Can you send me your elogd.cfg so that I could
reproduce your problem?

- Stefan

> > - Irestarted the daemon
> > - attached strace to it
> > - requested the list for a testin logbook, few entries some quite big images 
> >   (two thumbnails, the other are old images get resized my the browser)
> > - repeted previous point a couple of times
> > - press F5 (mozilla-firefox)  the browser hangs 4ever
> > - stop the load
> > - repeat point 3, all right
> > - F5 => hangs
> > - F5 => hangs
> 
> I tried to reproduce this problem, but everything was fine. This problem was never
> reported by anyone else as well.

I tried to rise the problem with konqueror, and all works nice... running
mozilla-firefox gives the problem instead (also running the test at the same time), so
there should be something in firefox or in the interaction between firefox and elog.
I'll send you one of the elog giving the problems so you can test by yourself as you
asked.

btw:
http://midas.psi.ch/elogs/Forum/?mode=full&attach=1  does not gives any problem to me
even running firefox. so the problem may be in some my elog.cong parameter ...