Hello all,

i have a question to mysql inexecute:

This works:

Execute new = mysql -h localhost -u root -D test1 -e "insert into `test1` (author, type) values ('$Author', '$Type')"

This doesn't work:

Execute new = mysql -h localhost -u root -D test1 -e "insert into `test2` (Autor, Adressat, Teil1, Teil2, Teil3,
Teil4, Teil5, Teil6, Teil7, Teil8 )  values ('$Autor', '$Adressat' ,  '$Teil1', '$Teil2', '$Teil3', '$Teil4', '$Teil5',
'$Teil6', '$Teil7', '$Teil8' )"

db is okay, i have all checked this. My question is: can the execute-command take a multiline argument? Or perhaps does somebody see a mistake i have made in the execute-line?

Thanks!

Steve

I really appreciate your help and I hope that my questions warrant your time.

What I am trying to accomplish is two totally separate groups of logbooks that share a common logbook.

Three logbooks

Logbook A

Logbook B

Logbook C (just informational, write protected)

Two Groups

Top Group 1 = Logbook A, Logbook C

Top Group 2 = Logbook B, Logbook C

What is happening is everything looks good until you try to enter Logbook C from Group 1. You end up in Logbook C (the right logbook) but you are now in Group 2.

Actual Code:

;Groupings
Top Group Central = Centaur, On-LineHelps
Top Group Good Sam = GSH, On-LineHelps

Hello,

   Thank you for such a great software package!

   I would like to ask how I can display the Revisions field in the single entry view but not in the list view. I followed the FAQ instructions and added the following to my elodg.cfg:

   Attributes = Author, Type, Category, Subject, Revisions
   Locked attributes = Revisions
   Subst on Edit Revisions = $Revisions
$date by $long_name

   This configuration shows the Revisions field in both the list view and the single entry view. This was a problem because certain entries are changed a lot so they took up a lot of horizontal space in the list view. I tried to remove the Revisions field in the list view but keep them in the single entry view with the following:

   Attributes = Author, Type, Category, Subject
   Show Attributes = Author, Type, Category, Subject, Revisions
   Locked attributes = Revisions
   Subst on Edit Revisions = $Revisions
$date by $long_name

   This took the Revisions field out of the list view and also the single entry view. However, the fields that were shown in the single entry view ended up as Author, Type, Category, Subject, Author (again).

   The last attempt were with the following configuration lines:

   Attributes = Author, Type, Category, Subject
   Show Attributes = Revisions
   Locked attributes = Revisions
   Subst on Edit Revisions = $Revisions
$date by $long_name

   This showed Author, Type, Category, Subject in the list view but only the Author field in the single entry view.

   How can I configure Elog to show the Revisions field in the single entry view but no the list view?

Thanks,
   - Dan

Hi,

One of my logbooks is a fault reporting system; it emails a group of people when a fault is reported. There is an MOption 'Technical Groups', and I want to have a tooltip for each checkbox which shows who is referred to by each group name. However, individual tooltips for each MOption attribute don't seem to work. I've looked at the HTML code, and there's no 'title' attribute for the checkboxes, so it's not a browser problem. I've attached my config file. Any idea what's going wrong?

ben

Hi all,

i have problems with execute delete (execute new works fine) in following config (the attribute 'Counter' will not evaluated). Can anybody help me?

Here is the config:

Attributes = Counter, Autor, Adressat, Start, Ende, Mitteilung, TextBeachten

Show Attributes = Counter, Autor, Adressat, Start, Ende, Mitteilung, TextBeachten
Show Attributes Edit = Counter, Autor, Adressat, Start, Ende, Mitteilung, TextBeachten


Type Start = date
Type Ende = date
Required Attributes =  Autor, Adressat, Start, Ende, Mitteilung
Extendable options = Adressat
Preset Autor = $long_name
Preset Counter = SoMi-#####



Locked Attributes = Autor, Counter
Required Attributes =  Adressat, Start, Ende, Mitteilung

Options Adressat = Alle, 1. Semester, 2. Semester, 3. Semester, 4. Semester, 5. Semester, 6. Semester, 7. Semester, 8. Semester
MOptions Textbeachten = Bitte Mitteilungs-Text anzeigen lassen



Execute new = C:\xampp\mysql\bin\mysql.exe -h localhost -u root -p123456 -D screen -e "insert into somi (counter,adressat,start,ende,kumi,mitlami,lami) values ('$Counter', '$Adressat', '$Start', '$Ende', '$Mitteilung',  '$TextBeachten', '$text')"


Execute delete = C:\xampp\mysql\bin\mysql.exe -h localhost -u root -p123456 -D screen -e "delete from somi where counter='$Counter'"

Thanks in advance and Merry Christmas!!

Steve

I installed ELOG on a Linux server (CentOS 5.2) and a WinXP laptop.

- If I set both servers to non-SSL, I can synchronize with no problems.

- If I set both servers to use SSL, synchronization fails with "Error code: ssl_error_rx_record_too_long" 

- If I set one to ssl and the other non-ssl, synchronization fails with "Remote server is not an ELOG server"

Is anyone synchronizing or mirroring two ELOG servers with SSL? When either or both servers are set to use SSL, I can use either site. but I can't synchronize.

Thanks

 I use Google Chrome for web browsing these days..  I've had serious issues with surfing some of the pages of our ELOG V2.7.5-2130 site.  For instance, I can surf directly to our url to create a new entry (http://changelog.company.com/Company+IT+Change+Log/?cmd=New) and see the page just fine.  But when I click on the header to go back to the main page (http://changelog.company.com/Company+IT+Change+Log/) I end up with this error:

This webpage is not available.

But when I visit the DEMO elog site (http://midas.psi.ch/elogs/Linux%20Demo/) it pulls right up just fine..  My site also works in IE without problems.

Any ideas?  I run our ELOG on windows server.. maybe that has something to do with it..

Hi,

after setting

Date format = %Y-%m-%e

in elogd.cfg,

elogd hangs and must be restarted manually. Can anybody help me?

Thanks,

Steve