| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
66621
|
Tue Nov 17 19:31:46 2009 |
 | Heinzmann | catman333@web.de | Bug report | Windows | 2.7.7 2246 | Re: Re: 2.7.6 and 2.7.7 crash upon opening logbook that runs on 2.7.5 |
| David Spindler wrote: |
|
| Stefan Ritt wrote: |
|
| David Spindler wrote: |
|
I upgraded 2.7.5 rev 2175 to 2.7.7 rev 2246 last Thursday. I tested it with several logbooks with no problems. However I received a rep[ort today that it was down. I discovered whenever I tried to open a logbook entitled "Equipment Reservation" in the folder "EquipmentReservations" Elog would crash. I checked the elog.log file with no entries in it other than showing when it was restarted. I backed up to 2.7.5 and had no porblems with the same logbook. I repeated the upgrade to 2.7.7 with the crash problem returning. I am now back on 2.7.5 with no problems.
I just decided to try 2.7.6 rev 2239 and had the same results as 2.7.7.
This is running under Win2K with SP4 as an automatic service on port 80.
I am also running Elog V2.7.4-2118 on a different port (8080) simultaneously with no problems.
If you wish I will send the elog.cfg file. Anything else I can do to help, please let me know.
|
I need to reproduce your problem. Therefore I need the configuration and the xxxxxxa.log file containing the offending entries. You can strip it down to the minimum needed to do the crash.
|
In the process of trying to reduce it to a minimum I discovered that the entry that appears to be causing the crash is this:
|
Hi,
I´m using 2.7.7 rev 2246 and tested it with my logbooks without any problems. But today I had no chance to reach them anymore. Strange.
Regards,
Michael
|
|
66836
|
Sun Jun 6 22:54:55 2010 |
 | Heinzmann | catman333@web.de | Question | Windows | 2.7.8 | change design part of the discussion board |
Hello Stefan,
If I would like to change the design of the attached part of the discussion board like:
deleting OS: (including blue box) Linux Windows Mac OSX All Other (including green box)
Where and how could I do this?
Thank you
|
| Attachment 1: midas.psi.ch.htm
|
|
66843
|
Tue Jun 8 23:08:41 2010 |
| Heinzmann | catman333@web.de | Question | Windows | 2.7.8 | Re: change design part of the discussion board |
| Stefan Ritt wrote: |
|
| Heinzmann wrote: |
|
Hello Stefan,
If I would like to change the design of the attached part of the discussion board like:
deleting OS: (including blue box) Linux Windows Mac OSX All Other (including green box)
Where and how could I do this?
Thank you
|
Well, the official forum at midas.psi.ch cannot be changed by you. But if you installed a local logbook similar to the one here, you simple go and edit the confitguration file elogd.cfg. Please read the documentation for further information.
|
Stefan,
I have done the changes to my logbock, but I think I have done something wrong. As an example, the window where you write in your note is not sized anymore like before. I have to scroll a lot to the right to see the right border of the window.
The only thing I have done was try to delete: the OS: Linux Window Mac OSC All Other info.
Please could you help me out?
|
|
65976
|
Mon Sep 15 16:22:39 2008 |
| Wythe IT | carwile@avwtech.com | Bug report | Windows | 2.7.4 | Install on Server 2003: |
I am using Windows Server 2003 R2 Standard Edition. It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way). I host a variety of webpages from this server through IIS6.0.
I am having an issue after installation of the ELOG software. I grabbed the newest version from this website and ran the executable. It installed fine (or appeared to do so).
Upon starting the ELOG server I receive the following error:
elogd.exe - Unable to Locate Component
This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem.
The file in question is part of an ancient Visual C distributeable. This distributeable for my purposes no longer appears to be available (as I am on .net 3.5). I am unsure of downloading the older runtime libraries from sites that are not microsoft's. I am curious as to how I could go about making elog execute. Any help would be appreciated. Thank you!
|
|
65978
|
Mon Sep 15 18:49:33 2008 |
| Wythe IT | carwile@avwtech.com | Bug report | Windows | 2.7.4 | Re: Install on Server 2003: |
| Stefan Ritt wrote: |
|
| Wythe IT wrote: |
|
I am using Windows Server 2003 R2 Standard Edition. It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way). I host a variety of webpages from this server through IIS6.0.
I am having an issue after installation of the ELOG software. I grabbed the newest version from this website and ran the executable. It installed fine (or appeared to do so).
Upon starting the ELOG server I receive the following error:
elogd.exe - Unable to Locate Component
This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem.
The file in question is part of an ancient Visual C distributeable. This distributeable for my purposes no longer appears to be available (as I am on .net 3.5). I am unsure of downloading the older runtime libraries from sites that are not microsoft's. I am curious as to how I could go about making elog execute. Any help would be appreciated. Thank you!
|
I didn't realize that MSCVR71.dll is kind of outphased. I will add it to future distributions. For the moment, you can download it from the elog server directly.
|
Thank ya much. Worked perfectly. For others with this issue, download that linked file to your c:\windows\system32\ folder. |
|
65985
|
Thu Oct 2 19:00:25 2008 |
| Wythe IT | carwile@avwtech.com | Bug report | Windows | 2.7.4 | Random Crashes |
Running on windows server 2003.
Mysteriously from time to time i find ELOG has crashed and i must restart it.
Event log shows:
This has occurred twice so far in the month or less elog has been running. The platform is stable and i have no other issues or negative events besides incorrect ASP calls here and there. Thanks.
Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version 0.0.0.0, fault address 0x0004b9c3.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. |
|
69459
|
Sat Jan 29 09:05:47 2022 |
| Carsten Winkler | carsten.winkler@helmholtz-berlin.de | Question | Linux | 3.1.4-3 | elog@Ubuntu 18.04 |
Hello,
I try to start elog at Ubuntu 18.04. When I run sudo /usr/local/sbin/elogd -D -c /usr/local/elog/elogd.cfg I get following error:
/usr/lib/libssl.so.10: version `libssl.so.10' not found (required by /usr/local/sbin/elogd)
I checked following:
ls -l /usr/lib/libssl.so.10
lrwxrwxrwx 1 root root 41 Jan 29 08:24 /usr/lib/libssl.so.10 -> /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
ls -l /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
-rw-r--r-- 1 root root 424664 Aug 24 18:16 /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
What's going wrong? And how to solve the problem?
Best,
Carsten |
|
69461
|
Tue Feb 1 09:13:40 2022 |
| Carsten Winkler | carsten.winkler@helmholtz-berlin.de | Question | Linux | 3.1.4-3 | Re: elog@Ubuntu 18.04 |
sudo ldconfig didn't solve the problem
Is there any other solution than elog static linking?
| Stefan Ritt wrote: |
|
Looks like you don't have shared libraries correctly configured on your system. Try "ldconfig" on your system or link elogd statically (google how to do that).
Stefan
| Carsten Winkler wrote: |
|
Hello,
I try to start elog at Ubuntu 18.04. When I run sudo /usr/local/sbin/elogd -D -c /usr/local/elog/elogd.cfg I get following error:
/usr/lib/libssl.so.10: version `libssl.so.10' not found (required by /usr/local/sbin/elogd)
I checked following:
ls -l /usr/lib/libssl.so.10
lrwxrwxrwx 1 root root 41 Jan 29 08:24 /usr/lib/libssl.so.10 -> /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
ls -l /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
-rw-r--r-- 1 root root 424664 Aug 24 18:16 /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
What's going wrong? And how to solve the problem?
Best,
Carsten
|
|
|