Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 63 of 808  Not logged in ELOG logo
    icon12.gif   [patch] Re: images attached shown as inline , posted by Emiliano Gabrielli on Tue Feb 8 19:04:25 2005 
> > uhm ok .. can I expect to get a release with this feature in the near future ?

> I checked how I would do that and did not find a good solution. If I put a
    icon2.gif   [patch] Re: images attached shown as inline , posted by Stefan Ritt on Sat Feb 12 17:48:51 2005 
Are you sure that this does not stretch small images? Please see elog:931

> two new elog.conf parameters are defined:
    icon2.gif   [UPDATE] Re: Crafted URL causes elog to coredump, posted by Steve Jones on Mon Mar 6 18:54:32 2006 
[quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.  This is occurring
under rev 1660. [/QUOTE]
    icon2.gif   [UPDATE2] Re: Crafted URL causes elog to coredump, posted by Steve Jones on Wed Mar 8 18:05:54 2006 
[quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.
 This is occurring under rev 1660. [/QUOTE]
    icon2.gif   [Segmentation Fault source identified] Verbose Output: Re: Crafted URL causes elog to coredump, posted by Steve Jones on Wed Mar 8 20:19:14 2006 
[quote="Steve Jones"][quote="Steve Jones"][quote="Steve Jones"][quote="Stefan Ritt"][quote="Steve Jones"]Try a non-existent logbook - example http://midas.psi.ch/elogs/elog/NewForum.
 This is occurring under rev 1660. [/QUOTE]
    icon3.gif   [SOLVED] Re: list view mode remembert - Bug?, posted by Holger Mundhahs on Wed Mar 1 12:27:36 2006 
> > As default http://<hostname>/<LOGBOOK> shows the Summary View.
> > Clicking in "Full" changes the URL to http://<hostname>/<LOGBOOK>/?mode=full.
> > But now the URL http://<hostname>/<LOGBOOK> show the Full view as default.
    icon6.gif   [SOLVED] Re: MOptions problem ?, posted by Alex H on Tue Feb 28 12:08:42 2006 gotcha.gif
Yop,
I think I found the solution! I was in fact a [B]conditions[/B] conflict!
See the attached picture for easiest comprehension.
    icon2.gif   [SOLVED] Re: MOptions problem ?, posted by Stefan Ritt on Wed Mar 1 07:48:11 2006 
[quote="Alex H"]It seems that the condition ID must be unique across the whole elogd.cfg.[/quote]

Right. Here is a quote from the Manual:
ELOG V3.1.5-3fb85fa6