Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 656 of 808  Not logged in ELOG logo
 Find |  Login |  Help 
New entries since:Thu Jan 1 01:00:00 1970
 Full | Summary | Threaded | Hide attachments  Show all entries    6457 Entries 
Goto page Previous  1, 2, 3 ... 655, 656, 657 ... 806, 807, 808   Next  
ID Datedown Icon Author Author Email Category OS ELOG Version Subject
  1287   Wed Jul 20 22:39:05 2005 Reply Stefan Rittstefan.ritt@psi.chBug reportLinuxrev 1.703Re: Display Subject and HTML tags, regression

Emiliano Gabrielli wrote:

Emiliano Gabrielli wrote:
rev 1.703 makes the following code not to work:
Display Subject               = <b>$subject</b>

the <b> tag is displayed and not interpreted, as it was in previous revisions..


this patch should fix the problem .. a little bug still remain, if you insert some allowed HTML tags in the subject this is detected by is_html() so the Display Attribute and the Link is not applied .. the result is that the HTML is working but no elog featur is applied


Your line
if (p && strchr(str, '>') && p >= str && *(p-1) != '\\')

in the code does not work. If the pattern is at the beginning of the string (p == str), then (p-1) points to an invalid location and can cause a segmentation fault. The correct patch is in CVS.
  1286   Wed Jul 20 22:28:14 2005 Reply Stefan Rittstefan.ritt@psi.chBug reportLinuxrev 1.703Re: Display Subject and HTML tags, regression

Emiliano Gabrielli wrote:
rev 1.703 makes the following code not to work:
Display Subject               = <b>$subject</b>

the <b> tag is displayed and not interpreted, as it was in previous revisions..


rev. 1.707 makes it work again Big grin
  1285   Wed Jul 20 21:43:56 2005 Reply Stefan Rittstefan.ritt@psi.chBug reportAll Re: [code] should be a sort of <CDATA >

Emiliano Gabrielli wrote:
Using the [code] elocode should be intended also to preserve the tagged text from beeing parsed as html or elcode itself ..

this is an example:

Quote:
Note that, for security reasons, you should check the MD5 FINGERPRINT of the SSL certificate issued by the server agaist the following one:

MD5 Fingerprint = 23:A7:AD:33:3C:08:BE:2A:62:6E:85:DF:B8:00:23:40


Thank you


As you can see, your entry with the [code] section is now shown without interpretation. So everything between [code] and [/code] is not interpreted as ELCode tags. The modification is committed to CVS.
  1284   Wed Jul 20 21:13:03 2005 Reply Michael Husbynmichaelh@online.noQuestionLinux2.5.9-2Re: Omitting some fields in e-mail
> I added the option "Email attributes = <list>" for that. So you can specify
> 
> Email attributes = UA, Pri, Status, Oppdragsgiver, EpostTil, Tittel
> 
> which also sets the order of the attributes. The cange is in CVS.

Nice!

Thanks Stefan, I will test it when I'm back from my holiday. Only problem is that this change is also in a
beta version of elog (more "beta" than usual)

Perhaps it is not in this state when I'm back :)

have a nice holiday

Best regards
Michael
  1283   Wed Jul 20 21:03:29 2005 Reply Stefan Rittstefan.ritt@psi.chBug fixLinux2.5.9Re: elog utility for submission used wrong 'Host:' in POST header

Emiliano Gabrielli wrote:
This is not completally true IMHO .. better, it is, but it is not the only problem.

Elog seems to speak HTML/1.0, where "host:" is not implemented ... Since ELOG does not support Vhosts I think the right beaviour is to remove the "Host:" header at all ...


So I remove the Host: ... line at all, I hope this is ok with everybody.
  1282   Wed Jul 20 20:54:01 2005 Reply Stefan Rittstefan.ritt@psi.chQuestionLinux2.5.9-2Re: Omitting some fields in e-mail
> E.g, if you have the following:
> Attributes = TA, Endret, UA, Pri, Status, Oppdragsgiver, EpostTil, EpostIKT, Tittel
> 
> Then you get the heading:
> Logbook             : 
> TA                  : 
> Endret              : 
> UA                  : 
> Pri                 : 
> Status              : 
> Oppdragsgiver       : 
> EpostTil            : 
> EpostIKT            : 
> Tittel              : 
> 
> (removed the attribute data),
> 
> But I would like to send out only:
> UA                  : 
> Pri                 : 
> Status              : 
> Oppdragsgiver       : 
> EpostTil            : 
> Tittel              : 
> 
> Any way to do this in the current version?
> 
> And perhaps change the order too... I'm asking for much perhaps?

I added the option "Email attributes = <list>" for that. So you can specify

Email attributes = UA, Pri, Status, Oppdragsgiver, EpostTil, Tittel

which also sets the order of the attributes. The cange is in CVS.
  1281   Wed Jul 20 20:13:26 2005 Reply Stefan Rittstefan.ritt@psi.chQuestionWindows2.5.4-3Re: Cannot stat() config file

Stefan Rudat wrote:
Cannot stat() config file; No such file or directory.


I do not know what exactly is going on. This error occurs during runtime when elog tries to check if the config file (usually elogd.cfg) has changed. It checks if the file is there on startup, but apparently it is there, otherwise elog would not start. Then it checks about once per second if the file access time has changed. If so, it rereads the file. This way changes to the file become valid immediately, without restarting elog. The fact that elog has access to the file on startup, but not later, is somehow strange. Maybe you lock this file with an editor, or it is on a network drive which gets disconnected, or the permission changed after the startup. Something in that direction.
  1280   Wed Jul 20 19:49:21 2005 Entry Juliana Pengjpeng@yorku.caRequestLinuxV2.6.0hide attributes when view the logbook
Hi Stefan,

Thanks for the great work. We have been using elog for a year as inventory management.

Now we have a long list of attributes in our logbook, some of those we want to keep in database for record, but we don't want to see them because they are not used very often. I tried the "Show Attributes". my conf is like this:

Attributes = Name, SysAdmin, OS, Manufacturer, Model, Serial Number, Description, Main Function, Location, Memory, CPU Speed, Num CPU, Owner, Contact Name, Contact Phone, Contact Email, Bought From, Bought Date, Maintenance, Network Drop, Console Drop
.
.
.
Options OS = SunOs{1}, Linux{2}, Aix
{1} Show Attributes = Name, SysAdmin, OS, Manufacturer, Model, Serial Number, Description


but it seems only effective when adding the new entry. All the attributes will show in logbook. Is there a way to hide some of the attributes? It would be good to let each user to choose what to see what not to see, create their own view. Can you put it on your to-do list or wishlist?

Thanks
Goto page Previous  1, 2, 3 ... 655, 656, 657 ... 806, 807, 808   Next  
ELOG V3.1.5-3fb85fa6