Hi,

I've been exploring elog. I find when using IE 11, the text editor formatting buttons don't work with HTML encoding selected. The entire toolbar is grayed out. It appears to work fine with Chrome. Any ideas or direction to look? elog v3.1.1 is running on RedHat EL5. I've tried the rpm installation, and source code compilation and installation with no change.

Any input would be greatly apriciated!

John

I am interested in using LDAP authentication for elogd on Windows for which it looks like I need to compile from source, enabling LDAP in the make file.

Does anyone have advice on build environments for Windows in which they have had success making elog?  Free ones preferably, such as Cygwin. 

Is there a way to distribute e-mail based on the consideration of several attributes and values?  A simple example:  attributes type and category have several different values, say, routine and problem for type and hardware and software for category, but one would only like messages sent when there's a problem to different sets of hardware or software types.  Thus:

Email

type routine   category hardware = no message

                        category software = no message

type problem  category hardware =  a@bcd.efg, h@ijk.lmn

                         category software = 1@opq.rst, 2@uvw.xyz

Hello.

In Elog i have attribute called "Zmieniano" (eng. changed)  which should store how many times entry was edited. If entry was not edited it should have only preset value "oryginalny wpis" (eng. oryginal entry), but when I edit it, it should have also date, time, and person who make edit (this is made by "Subst on Edit Zmieniano = $Zmieniano<br>- Zmiana $date przez $long_name z $remote_host)". 

From version V3.1.1-3f311c5 I have problem with that. 

When I add entry, and entry is auto saved, then auto save is shown in the attribute "Zmieniano" (eng. changed) as an next edit, which I dont want. Entry from attached screenshot was not edited, but in "Zmieniano" (eng. changed) attributes it has two values:

• Oryginalny wpis (eng. oryginal entry),
• Zmiana 27.08.2015, 10:52 przez Daniel Sajdyk z serwerownia.sr.lez (eng. Changed 27.08.2015.... ) 

The second value is autosave time. 

Is this a bug?

Regards

Daniel. 

Hi.

Is there any way that "Preset on duplicate" contain ID entry from which it was duplicated?

Cheers

Daniel.

Good Morning,

I would like to limit the ability to edit certain attributes in an ELOG logbook, depending on the user who is logged in.  I.e. if "guest" or a standard "login user" is logged in, I only want to allow the user to edit "attribute1" & "attribute2" of say, 5 attributes.  However, if an Admin user or specific user, say "Terry" or "Bob" is logged in, I want to allow ALL 5 attributes to be editable.  To expand on this, I may want to even limit the visibility of the attributes as well.

I've read though "Condition Attributes" section of the help page, but it is not clear to me how/if I can do this?  Is that section even relevant to what I want to accomplish?

Can anyone provide some guidance?

Thank you for your time & help!

Sincerely,

Terry

Using the elog client to upload atachments, I can successfully send attachments to an existing elog, however the existing attachments are lost.

I have tested using the elog client version 3.1.1 and elog client version 2.9.2 sending to elogd 2.9.0

elog -h localhost -p 8080 -l test -f  file1.png -f file2.png -e 249 -v -x

This works great, the text contained in the elog post is retained, however all attachments are lost and replaced with those sent by this command.

Can anyone provide some tips? I am not sure if its a problem with the client or server.

Thank you in advance!

Joseph