resending information confirmation box after refresh interval, posted by Ken Ludington on Mon Nov 16 20:42:15 2015 
|
After submitting a new post, if the page is left completely alone,, it will after a few minutes prompt that the page needs to resend information.
This is the same prompt you'd get if you attempt to refresh a page that had session variables passsed to it. Example is attached.
|
|
log entries after a certain date not displayed - 3.1.1, posted by Mike Giles on Fri Nov 20 10:28:41 2015
|
Hi,
I'm having an issue with Elog 3.1.1 on windows 10 not displaying all log entries (after a certain date) in a logbook directory.
The logbook is saved in a Dropbox folder and the entries were created on a windows 8.1 PC with 3.1.1 also. |
|
If a Required Attribute starts with a number – No CKEditor, posted by David Dunne on Fri Nov 27 06:53:54 2015
|
Hello,
Is the below an issue or am I doing something incorrectly?
Creating an attribute starting with a number and then including that attribute in
the Required Attribute list prevents access to the CKEditior.
This appears to be the case at least with FreeBSD (10.2 Rel) using Elog V3.1.0 and Windows
7 with Elog V3.1.1-3f311c5.
The problem can be recreated using the Elog supplied sample config and adding the necessary attribute, sample config showing |
|
drag and drop attachments not working with web server authentication, posted by Devin Bougie on Tue Jan 12 17:38:52 2016
|
Hello,
The "Drop attachments here..." section does not work when using Webserver authentication. Both elog 3.1.1 (the binary RPM) and apache are running
on EL6.6 and are configured according to the docs. Authentication works fine and the normal "Choose File - Upload" attachment table works fine. However,
when dragging an attachment to the "Drop attachments here..." section the dashes on the border turn green but when dropping the attachment nothing happens. |
|
Can I host elog in the web under windows platform without Apache Web Server?, posted by Dawang on Fri Jan 15 00:20:42 2016
|
Hi All,
Can I host elog in the web (internet) under windows platform (elogd.exe only) without Apache Web Server? If possible, what syntax should I add
in the configuration file? Appreciate feedback. Thanks. |
|
Re: Can I host elog in the web under windows platform without Apache Web Server?, posted by Andreas Luedeke on Fri Jan 15 15:31:54 2016
|
I admit that I'm not sure if I understood the question. It is quite some work to do the opposite, to run elog behind an Apache Web Server.
But
if you just install ELOG out of the box it will always run without an Apache Web Server. You don't need to add anything in the config file for that.
Dawang wrote:
|
|
drag and drop attachments only working for admins if "restrict edit = 1", posted by Devin Bougie on Tue Jan 19 22:03:36 2016
|
I'm finally able to reproduce this, and my initial description was incorrect. If we have "restrict edit = 1", only an "Admin
user" can use the "Dop attachments here..." or the "Image" button in the CKEditor. The old "Choose File,"
"Upload" buttons, however, works just fine for anyone. |
|
entry does not appear in list while it is being edited, posted by Devin Bougie on Wed Jan 20 20:38:17 2016
|
When an entry is being edited, it does not appear in the list once it's been autosaved or the editor manually clicks on "Save." This
has been reproduced in the "Linux Demo" forum on this site, as well as on a clean installation of the 3.1.1 binary on EL6.
It would be great if there was a configuraiton option to control this, but I haven't found it yet. To reproduce: |