How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 12:55:05 2017
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan |
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:04:13 2017
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:23:08 2017
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Thu Jan 5 14:40:59 2017
|
What I mean is that, when I select a catagory, the icon will change. If I change the icon, I need the catagory change too.
| Stefan Ritt wrote: |
|
If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before.
| Xuan Wu wrote: |
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
|
Re: How to make two attributes reacting with each other, posted by Xuan Wu on Fri Jan 6 11:05:18 2017
|
So, as far as I know that ROptions and IOptions doesn't support conditional attributes.
I think what you suggest is a nice idea. An alternative way is putting Category attribute before Icon attribute and adding a tooltip to Icon attribute. However, I think your advice is better. Thanks!
Cheers
Xuan
| Andreas Luedeke wrote: |
|
IOptions does not support conditional attributes.
I think the proper solution would be to remove the icon selection field from the input form:
Show Attributes Edit = Author, Author Email, Category, System, Subject
The user would then only be able to edit the Category, the Icon would always be set accordingly. I would think that this would be the appropriate behaviour.
Cheers, Andreas
| Xuan Wu wrote: |
|
What I mean is that, when I select a catagory, the icon will change. If I change the icon, I need the catagory change too.
| Stefan Ritt wrote: |
|
If you select a (different) category, the current icon setting simply gets overwritten, what ever it was before.
| Xuan Wu wrote: |
|
Sorry for my carelessness. What you said is definitely right. I just wonder how can Icon and Catagory change simultaneously whatever which one be selected first.
| Stefan Ritt wrote: |
|
The example I gave you worked for me, I actually tested it. Please note that it contains
Options Category = ...
and not
ROptions Category = ...
Stefan
| Xuan Wu wrote: |
|
Thanks for your quick reply! I just test what you suggested, even I test {1} Preset on edit Icon = icon1.gif, they both didn't work.
| Stefan Ritt wrote: |
|
You can do that with conditional attributes (see documentation):
Attributes = Author, Author Email, Icon, Category, System, Subject
Options Category = Shift Summary{1}, Report{2}, Reply{3}, Fault{4}, Issue{5}, Resolved{6}, Maintenance{7}
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
{1} Preset Icon = icon1.gif
{2} Preset Icon = elc_list.png
{3} Preset Icon = icon3.gif
{4} Preset Icon = icon8.gif
{5} Preset Icon = icon4.gif
{6} Preset Icon = icon14.gif
{7} Preset Icon = elc_anchor.gif
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
| Xuan Wu wrote: |
|
Hi all,
I have two attributes defined like following
Attributes = Author, Author Email, Icon, Category, System, Subject
ROptions Category = Shift Summary, Report, Reply, Fault, Issue, Resolved, Maintenance
IOptions Icon = icon1.gif, elc_list.png, icon3.gif, icon8.gif, icon4.gif, icon14.gif, elc_anchor.png
Icon comment icon1.gif = Shift Summary
Icon comment icon3.gif = Reply
Icon comment icon4.gif = Issue
Icon comment icon8.gif = Fault
Icon comment icon14.gif = Resolved
Icon comment elc_list.png = Report
Icon comment elc_anchor.png = Maintenance
When the Shift Summary category being selected, I wish the icon1.gif Icon being selected automaticlly, as well as when icon8.gif being selected, Fault category be selected. How can I get this? Any advice or suggestions will be appreciated.
Cheers,
Xuan
|
|
|
|
|
|
|
|
|
|
Re: Elog crashes with null Username, posted by Xuan Wu on Fri Apr 21 02:21:59 2017
|
We also meet this issue occasionally, so how can we get rid of this?
| Stefan Ritt wrote: |
|
Ups. This bug must have lingered there since the beginning of time. Funny that nobody noticed in the last ten years or so. I have fixed it in the current git revision.
| Alan Grant wrote: |
|
I haven't found any reporterd issues in the forum similar yet, but it appears there is a bug in Elog when logging into logbooks. If I leave Username and Password null and click Submit the daemon crashes. We've been having this problem off and on and after some verbose logging level 3 I was drawn to these recurring lines in the log:
16-Dec-2016 18:20:22 [172.23.113.4] {SER Reports} LOGIN user "" (attempt)
16-Dec-2016 23:15:52 [] Server listening on port 8080 ..
16-Dec-2016 23:18:05 [172.23.113.4] {Daily Request Log} LOGIN user "dmorrison" (attempt)
|
|
|
|
Re: Elog crashes with null Username, posted by Xuan Wu on Fri Apr 21 08:19:05 2017
|
No, We are using the released version 3.1.2
How to use the current git revision or is it a long time to wait for the next release?
| Alan Grant wrote: |
|
Are you using the current git revision Xuan?
| Xuan Wu wrote: |
|
We also meet this issue occasionally, so how can we get rid of this?
| Stefan Ritt wrote: |
|
Ups. This bug must have lingered there since the beginning of time. Funny that nobody noticed in the last ten years or so. I have fixed it in the current git revision.
| Alan Grant wrote: |
|
I haven't found any reporterd issues in the forum similar yet, but it appears there is a bug in Elog when logging into logbooks. If I leave Username and Password null and click Submit the daemon crashes. We've been having this problem off and on and after some verbose logging level 3 I was drawn to these recurring lines in the log:
16-Dec-2016 18:20:22 [172.23.113.4] {SER Reports} LOGIN user "" (attempt)
16-Dec-2016 23:15:52 [] Server listening on port 8080 ..
16-Dec-2016 23:18:05 [172.23.113.4] {Daily Request Log} LOGIN user "dmorrison" (attempt)
|
|
|
|
|
|
Re: Elog crashes with null Username, posted by Xuan Wu on Fri Apr 21 12:18:57 2017
|
Awesome！It's appreciated. Many Thanks!
| Stefan Ritt wrote: |
|
I made a new release for you 3.1.3
| Xuan Wu wrote: |
|
No, We are using the released version 3.1.2
How to use the current git revision or is it a long time to wait for the next release?
| Alan Grant wrote: |
|
Are you using the current git revision Xuan?
| Xuan Wu wrote: |
|
We also meet this issue occasionally, so how can we get rid of this?
| Stefan Ritt wrote: |
|
Ups. This bug must have lingered there since the beginning of time. Funny that nobody noticed in the last ten years or so. I have fixed it in the current git revision.
| Alan Grant wrote: |
|
I haven't found any reporterd issues in the forum similar yet, but it appears there is a bug in Elog when logging into logbooks. If I leave Username and Password null and click Submit the daemon crashes. We've been having this problem off and on and after some verbose logging level 3 I was drawn to these recurring lines in the log:
16-Dec-2016 18:20:22 [172.23.113.4] {SER Reports} LOGIN user "" (attempt)
16-Dec-2016 23:15:52 [] Server listening on port 8080 ..
16-Dec-2016 23:18:05 [172.23.113.4] {Daily Request Log} LOGIN user "dmorrison" (attempt)
|
|
|
|
|
|
|
|