I'm trying to set up a python rss parser to read the output from my collaboration's elog, however the elog is password protected and I cannot figure out how to have a python scrip get past the login screen.  Is there something obvious I'm missing that will allow a parser to submit a username and password? If that's too python-specific of a question for this audience, then what is the exact security method elog uses, so I can get information on that?  I've read through the documentation and either I don't know what I'm reading (likely) or I'm not looking in the right spot.

What is the input format expected by the elog client for a required Datetime defined field when inserting a record? (Eg: October 26, 2016 = ? in the field's data parameter).

I have read some prior posts on this and the indication is that the input needs to use epoch time, however even when I enter 1477493161 or 0 the client still flags the variable data as missing. If this is in fact the format I shoud be using then I can provide a sample input and output message to illustrate my problem.

Is it possible for an administator to reset a user's password? 

Thanks,

Val

Hi,

I'm trying to upgrade ELOG 2.9.2, which I have been used many years, to the new version (3.1.2).

I can't run the new version even from the command line:

Message box appears with message:

What do I do wrong ?

I'm trying to use my old config file. New default config gave the same result :-(

Hi All,

I have a problem with email configuration with gmail account. I use Elog V3.1.1 and Stuneel V5-32 with Windows 7 Profesional 64-bit

I follow the instruction in elog:68039 This is my configuration elogd.cfg and stunnel.conf

# My elogd.cfg

;Mail server configuration
smtp host = 127.0.0.1
SMTP username = <My_email_account>@gmail.com
SMTP Password = MjhNYXNrb2tpMjI=

Email encoding = 1
Logout to main = 1

# My Stunnel.conf

[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
verify = 2
CAfile = ca-certs.pem
checkHost = pop.gmail.com
OCSPaia = yes

[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
verify = 2
CAfile = ca-certs.pem
checkHost = imap.gmail.com
OCSPaia = yes

[elogssl]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CApath = /etc/ssl/certs

[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:465
verify = 2
CAfile = ca-certs.pem
checkHost = smtp.gmail.com
OCSPaia = yes

I got error "Error sending Email via <i>"127.0.0.1"</i>" when I run it.

Could somebody help me?

Thanks,

Hi all,

A error came out when I pasted a photo in the text area with  HTML Encoding. The photo is a snapshot from Print Screen. When I submitted it, it said "Entry text too big. Please increase TEXT_SIZE and recompile elogd". How can I get rid of this? I've tried changing elogd.cfg that: ;Message Height = ;Message Width = or Message Height = 500 Message Width = 500. None of these work.

By the way, I want to ask another question that whether it can load a photo on local disk not only the photo URL by click image of the Image info in CKEditor. Can CKFinder integrate in CKEditor and then it can browse local file on tab of image info. My colleagues prefer pasting photos in text area than uploading it as attachment in our site.

Any advice or sugguestion will be appreciated.

Hello.

I finally try add ImageMagick to ELOG.

I downloaded latest version (ImageMagick-7.0.3-Q16) and installed it. Everything looks ok, but when I start Elog service it says that "ImageMagick not detected". 

When I look at the "path" variable i have "C:\Program Files\ImageMagick-7.0.3-Q16;C:\ProgramData\Oracle\Java\javapath;[...]".

What else can I check?

Regards

Daniel.

Ps. My system is Windows 7 Pro. 

Hi,

I am trying to install on MacOS Sierra. I believe that I have followed all the steps correctly, but the install is failing with the following error: 

Help appreciated!

Thanks,
Christina