| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
68587
|
Wed Mar 29 14:48:40 2017 |
 | John Becker | j.becker@airportaruba.com | Question | Linux | 3.12 | Elog stopped working | Dear all,
I have elog version 3.12-bd75964 installed on an Ubuntu OS. We started working with it yesterday and today I was informed that the users could not connect to the elog. When I tried it was also not possible to get to the elog website. After restarting the Ubuntu machine everything was back to normal.
Is there a log I can check to find out why the elog stopped working?
Regards,
John |
|
68592
|
Thu Apr 6 17:36:46 2017 |
| Stefano Lacaprara | stefano.lacaprara@pd.infn.it | Question | Linux | 3.1.1 | command line and apache+ldap authentication | Hi,
we are running an elogd (with SSL) server on a machine and using apache as a proxy.
The authentication to the apache server is managed via LDAP module directly by apache, while, so far, we have no authentication enabled in the elogd server itself.
So, when a used want to access the elog server, he is required to provide user/pwd by apache, and then he can access the elogs.
We would like to use the elog command line to transit entries automatically from a terminal from a different host.
the command line we are trying is:
echo "Test" | elog -v -h elog.belle2.org -a Author="stefano" -a Type="Other" -l elog -s demo -u username password -p 443
where username password are registered into LDAP.
In response we have a 401 Unauthorized. The full return message is at the end of this message.
I suspect that the "username password" we pass to elog are supposed to be that of elogd, not that of apache/ldap: I don't know if this is the case.
Does anyone have an idea how to make this work?
Thanks in advance,
Stefano
Successfully connected to host elog.belle2.org, port 443
Request sent to host:
POST /elog/ HTTP/1.0
Content-Type: multipart/form-data; boundary=---------------------------44BDB584269C5EEC3F73204
Host: elog.belle2.org:443
User-Agent: ELOG
Content-Length: 946
Content sent to host:
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="cmd"
Submit
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="unm"
xxxxxxxx
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="upwd"
xxxxxxxx
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="exp"
elog
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="encoding"
ELCode
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="Author"
stefano
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="Type"
Other
---------------------------44BDB584269C5EEC3F73204
Content-Disposition: form-data; name="Text"
demo
---------------------------44BDB584269C5EEC3F73204
Response received:
HTTP/1.1 401 Unauthorized
Date: Thu, 06 Apr 2017 15:32:37 GMT
Server: Apache/2.4.18 (Ubuntu)
WWW-Authenticate: Basic realm="Belle II internal"
Content-Length: 463
Connection: close
Content-Type: text/html; charset=iso-8859-1
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>401 Unauthorized</title>
</head><body>
<h1>Unauthorized</h1>
<p>This server could not verify that you
are authorized to access the document
requested. Either you supplied the wrong
credentials (e.g., bad password), or your
browser doesn't understand how to supply
the credentials required.</p>
<hr>
<address>Apache/2.4.18 (Ubuntu) Server at elog.belle2.org Port 443</address>
</body></html>
Error transmitting message |
|
68600
|
Tue Apr 11 22:44:40 2017 |
| Andreas Luedeke | andreas.luedeke@psi.ch | Question | Windows | 3.1.2-7933898 | Re: rename menu commands | Hm, maybe my question is silly, but why don't you just use the "Duplicate" command instead of renaming and misusing "Copy to"??
Here is the relevant excerpt from the documentation (https://midas.psi.ch/elog/config.html#general):
Menu commands = <list>
This option specifies the menu commands displayed on top of a single logbook page. For certain installations, it can be useful to disable some commands. Following commands are possible:
- New - Enter new logbook entry
- Edit - Edit current logbook entry
- Delete - Delete current logbook entry
- Reply - Submit a reply to current entry
- Duplicate - Duplicate the current entry with the possibility to change some values
- [...]
- Copy to - Copy entry to other logbook
- [...]
The commands are always in English, independent of the language = ... setting, and are automatically translated into the specified language.
If this option is not present, following default is used:
Menu commands = List, New, Edit, Delete, Reply, Duplicate, Find, Config, Help
| Francois Cloutier wrote: |
|
Hi !
I do have an setup were I would like to rename the menu command but keeping their fonction. Namely, I would like to rename the "copy to" button to "Duplicate" since thats the option I would like to put in place ( Copy to = Same logbook only).
I tried to do so with css but it is not possible since the button doesn't have a specific id... Would you have another solution ?
Thanks for your help !
|
|
|
68603
|
Thu Apr 20 12:45:11 2017 |
| K | p1454477@mvrht.com | Question | Linux | 2.9.2 | Full anonymous access | How can i configure eLog to be used completely anonymous without the need to log in?
I tried menu and guest menu settings without luck. I do not use password files. With earlier versions this was easy to set up...
Thanks in advance |
|
68614
|
Thu Apr 27 22:21:03 2017 |
| Alan Grant | agrant@winnipeg.ca | Question | Windows | 3.1.2 | Limiting search data | I'm aware there is the "Show Last Default" setting for the Find page but is there (or can there PLEASE be) a similar setting for the Period filter on the List page? Our users routinely use the Quick Filters instead and it bogs down the system because we have lots of logbooks. Many thanks. |
|
68629
|
Sat Jun 10 07:05:24 2017 |
| Erkcan Ozcan | erkcan@gmail.com | Bug report | Linux | V3.1.3-aded4ae | Server dropping SSL connection while uploading large files | Hi,
I am having trouble with uploading large (>0.5MB) files to elog. We click on upload and in a couple of seconds, the webbrowser complains that the server has dropped the connection.
Following the suggestions I found on these forums (https://midas.psi.ch/elogs/Forum/66753), I increased the timeout.tv_sec to 30 in three locations in elogd.c, but this did not help.
The problem is present in my old elog installation (from ~2 years ago), as well as the latest git snapshot from bitbucket that I cloned on June 10, 2017.
PS: Upload seems to work for non-secure configuration. It still takes a while to load, but it completes. However we prefer to use secure connections ( SSL = 1 ).
PS: Using nmap I looked at the latency to the relevant port, it can be as high as 0.5sec, but most often it is shorter.
Cheers,
e. |
|
68630
|
Mon Jun 19 07:48:49 2017 |
| Niklas Hoglund | niklas@hoglund.pp.se | Question | Windows | 3.1.3 | Is it possible to generate a table of contents based on h1/h2/h3 HTML tags? | Is it possible to generate a table of contents based on h1/h2/h3 HTML tags?
Example:
toc()
< h1>test
< h2>test1
< h1>test2
< h2>test3
< h1>test4
< h2>test5
Results in:
1. test
1.1 test1
2. test2
2.1 test3
3. test4
3.1 test5
...the text...
|
|
68637
|
Fri Jul 14 13:11:48 2017 |
| Daniel Sajdyk | daniel.sajdyk@gmail.com | Info | Windows | latest | Virus in latest elog? | Hello.
Today I wanted to download latest elog version, and got information from Eset Endpoint Antyvirus, that downloaded file has trojan horse "Generic.GQWFFXB".
It this false positive alarm?
Daniel
|
| Attachment 1: elog.png
|
|
|