Re: inactive users, posted by Andreas Luedeke on Wed May 31 13:28:51 2017
|
> Hi,
> I reopen this old thread since I'm having a similar problem.
>
|
Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 08:50:16 2017
|
Yes, parentheses in field content might be difficult to pass from a shell command. You did not even mention which Linux shell you are using and you did
not show the actual elog command. Maybe you want to add that information?
Phil |
|
Re: Weird behaviour of category filter, posted by Andreas Luedeke on Wed Jul 19 08:58:51 2017
|
Hi Daniel,
I agree: it should. And it does in my case; it works perfectly fine for my logbooks. Maybe you should have a closer look for special characters
in you configuration? Otherwise I don't know why it does not work for you. |
|
Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 10:14:44 2017
|
If that is your command then it is obvious why no email is send:
you do set "Type=Type", but only for "Type=Problem(s)" and "Category=TDAQ" you would send an email.
Instead of writing "-h host" you should as well define the actual hostname, like "-h midas.psi.ch", likewise for all other |
|
Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 13:37:33 2017
|
Okay, I can confirm that this does not work. It is likely related to the disclaimer in the ELOG documentation (https://midas.psi.ch/elog/config.html#conditional)
Conditional attributes are usually only used for change items in the entry form.
I guess that the "Email" command never worked with conditional attributes. I use the "Email" command and conditional attributes |
|
Re: Password Protect Delete, posted by Andreas Luedeke on Fri Jul 21 08:54:03 2017
|
You can allow guests to create entries, but only registered users (Admins) to delete (or edit) entries:
Menu commands = List, New, Edit, Reply, Delete, Find, Config, Logout,
Help |
|
Re: Conditional attribute activation, posted by Andreas Luedeke on Mon Jul 24 14:33:51 2017
|
Yes, this is possible by using "Conditional Attributes". Have a look at the ELOG syntax help: https://midas.psi.ch/elog/config.html#conditional
To hide attributes on edit, you can use "Show Attributes Edit = ..." for the conditions; and you
only list the comment reason for the case where the value of the other attribute has the value "reserved". |
|
Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Sun Aug 20 14:55:18 2017
|
I don't know if that works. Why don't you just try?
Satyajit
Jena wrote:
Hi, |