Hi

I have a large logbook to keep office demo equipments listed. So editing entries are very often, I would like to see last editing time on my entry as entry time shown as each entry. Is there any way to do this? I checked all attributes and commands  but couldn't find any.

King regard

Devrim

Hello,

I am trying first time to use the tool /usr/bin/elog. From the documentation is not clear to if everything must be in quotes or not, if every attribute requires -a.

Here is how my attempt looks like (changing actual data by fake one):

      /usr/bin/elog -h elog-1.matrix.com -l LogBook -u jcaballero mypassword -a Team='Team Name Here' Category='Category Here' -a 'Affected service'='Name of affected service here' -a Criticality=Normal -a 'Oncall Documentation'='No modifications required' -a Subject='here is the subject line' 'here is the text'

I just get "Error transmitting message". 

Attributes Team and Category are of checkbox type. Attributes Criticality and Oncall Documentation are of radio type.

What is wrong with my command attempt?

Thanks a lot in advance.

Cheers,

Jose

Is there any potential impact/concern with the Log4j exploit in Elog applications?

Hi,

Ten years later...this problem shows up in my installation behind Apache, affecting only drop-down menu searches.  Test installations with elog serving itself do not show the problem, so I presume it has something to do with Apache configuration, re-routing, etc.  Unfortunately, this thread did not provide any details of the solution.

The problem looks like this:

Type:    %255ERoutine%2524
or, in the url:

https://servername/?Type=%25255ERoutine%252524

Removing 2525 from front and back of the url makes everything work.

The only rewrite entries in the configuration file(s) are:

  ## Rewrite rules
  RewriteEngine On

  #redirect non-SSL traffic to SSL site
  RewriteCond %{HTTPS} off
  RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}

Perhaps there's a rewrite rule that could be added to block the 2525?  Something like:

    RewriteCond %{QUERY_STRING} 2525
    RewriteRule .* - [F,L]

I don't have a lot of experience configuring Apache, so any suggestions would be welcome.

Thanks.

Phil

Hello!

How can I make appear the text formatting panel (above the main text body field) inside entries?
In my logbook I do not have it (also in minimized form) and I do not find a way to enable it via elogd.cfg.

Thank you!
- Mariia

Hello,

I try to start elog at Ubuntu 18.04. When I run sudo /usr/local/sbin/elogd -D -c /usr/local/elog/elogd.cfg I get following error:
/usr/lib/libssl.so.10: version `libssl.so.10' not found (required by /usr/local/sbin/elogd)

I checked following:
ls -l /usr/lib/libssl.so.10
lrwxrwxrwx 1 root root 41 Jan 29 08:24 /usr/lib/libssl.so.10 -> /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
ls -l /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0
-rw-r--r-- 1 root root 424664 Aug 24 18:16 /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0

What's going wrong? And how to solve the problem?

Best,
Carsten

I expanded an elog server from 1 to 3 logbooks. For each logbook there is a separate password file defined. 

When I try to add a new user in one of the 2 new logbooks using config => new user, it adds the user to the password file for the original logbook.

Have verified that access to the logbooks is controlled via the separate password files. If it would help to provide an example of the elogd.cfg or if I need to clarify further, let me know. 

Any suggestions welcome.

Thanks. Mark.