Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 707 of 808  Not logged in ELOG logo
New entries since:Thu Jan 1 01:00:00 1970
ID Date Icon Authordown Author Email Category OS ELOG Version Subject
  270   Fri Apr 4 19:49:32 2003 Reply Byroncryogaze@easystreet.comBug report  Re: Password Problem
> > I noticed that when I put in a password such as <test1> a person can 
login 
> > with the password <test2> or any other number at the end.  Is the 
> > encryption not able to tell the difference between numbers?  The 
encrypted 
> > passwords even look the same in the password file.  Is this a bug?
> 
> This is really strange. Encryption only works on ASCII characters and does 
> not distinguish between letters and digits. When I try to reporoduce that, 
> the system distinguishes well between "test1" and "test2". The first gives 
> encrypted "dGVzdDE=" and the second gives "dGVzdDI=", note the 
different "E" 
> and "I". So I have no clue right now what is wrong in your installation. If 
> running under Linux, you can compile elogd after adding "-DHAVE_CRYPT" 
and "-
> lcrypt" to the Makefile to use the standard Linux crypt() function, but I 
> would rather like to understand what is wrong in your case.
> 
> - Stefan

Ok, try it with the passwords <hello1> and <hello2>.  Then when you go to log 
in, put in the password of <hello> with any single number after it and let me 
know if the problem shows up for you because that is the password I was 
using.  When I look at it encrypted in the passwd file they look the same.  I 
also installed the latest version today which is newer than the one I was 
using before and it still does it.  I appreciate your time.

Byron
  682   Fri Sep 3 20:17:12 2004 Question Bryan Moffitmoffit@jlab.org Linux2.5.4PostScipt Files shown as text.
At some point, in the last week or so, I upgraded the debian-unstable
version (r1459-1) of elog.  Now, PostScript files (as attachments) are
displayed (shown in ascii text, instead of just showing the link).  

Is there an option in the elog.cfg to only display certain files (like .gif
or .jpg).
  683   Fri Sep 3 20:17:20 2004 Question Bryan Moffitmoffit@jlab.org Linux2.5.4PostScript Files shown as text.
At some point, in the last week or so, I upgraded the debian-unstable
version (r1459-1) of elog.  Now, PostScript files (as attachments) are
displayed (shown in ascii text, instead of just showing the link).  

Is there an option in the elog.cfg to only display certain files (like .gif
or .jpg).
  684   Fri Sep 3 20:17:35 2004 Question Bryan Moffitmoffit@jlab.orgQuestionLinux2.5.4PostScript Files shown as text.
At some point, in the last week or so, I upgraded the debian-unstable
version (r1459-1) of elog.  Now, PostScript files (as attachments) are
displayed (shown in ascii text, instead of just showing the link).  

Is there an option in the elog.cfg to only display certain files (like .gif
or .jpg).
  66867   Wed Jul 28 17:21:31 2010 Question Bryan Moffitmoffit@jlab.orgQuestionLinux2.7.8-2278Disable forward/backward navigation keystrokes?

I wondered if there was a config line that enabled/disabled the forward and backward navigation keystrokes that were implemented in 2.7.0?

The current definitions (Control-PgUp/PgDown/Home/End) interfere with those keys I use to navigate between tabs in Firefox.  It'd be nice if they could either be turned off.. or redefined.

  66869   Wed Jul 28 17:32:15 2010 Reply Bryan Moffitmoffit@jlab.orgQuestionLinux2.7.8-2278Re: Disable forward/backward navigation keystrokes?

Stefan Ritt wrote:

Bryan Moffit wrote:

I wondered if there was a config line that enabled/disabled the forward and backward navigation keystrokes that were implemented in 2.7.0?

The current definitions (Control-PgUp/PgDown/Home/End) interfere with those keys I use to navigate between tabs in Firefox.  It'd be nice if they could either be turned off.. or redefined.

They are defined in

<ELOG directory>\scripts\elcode.js

Just go to the browse(evt) function and redefine or remove them there. 

 Got it to work as desired.

 

Thanks for your help and your quick response.

  65890   Fri May 23 20:56:43 2008 Question Bruno Serfassserfass@berkeley.eduQuestion  "preview attachement" flag not working on thumbnails ?
Hi,

I would like to turn off the display of attachements when editing an entry in some of our logbooks that contains big file. 
So I did set the flag "preview attachements"  to 0. It seems to work fine on text file attachment but 
the  thumbnails for PDF and images (very nice feature by the way!...) are still there...

How can I avoid displaying the thumbnails in the edit mode? This  is very important when the attached file is big  because
it almost makes it impossible to edit..

Thanks for your feedback!
Bruno 
  69238   Tue Oct 20 16:05:40 2020 Question Bruno Schulerbruno.schuler@empa.chQuestionWindows3.1.4-2Upload attachment with py_elog

Hello,

How can one add an attachment to a new or existing entry with py_elog?
E.g. if I want to upload an image.

Thanks for the help!

ELOG V3.1.5-3fb85fa6