Configure default time range in 'Find', posted by Eoin Butler on Fri Jan 16 13:41:18 2015
|
Hello,
We have a very large elog database, and executing a 'Find' on the whole range takes several minutes, locking other users out of the elog
for that time. It would be very nice if there could be an option to set the default value of the 'search last ...' option on the find page. Thanks |
Re: Configure default time range in 'Find', posted by Stefan Ritt on Fri Jan 16 14:29:58 2015
|
Have you tried in the "Find" page to set a start date, or select "Show last: Month". This shoudl speed up searching quit a bit.
Eoin
Butler wrote:
Hello, |
|
Re: Configure default time range in 'Find', posted by Eoin Butler on Mon Jan 19 11:09:31 2015
|
Yes, this works, but users inevitably forget to select "last week" or whatever, and just leave it blank, which means their search unintentionally
takes a long time. It would be much better if one could configure it to default to something "fast".
Stefan |
Re: Configure default time range in 'Find', posted by David Pilgram on Mon Jan 19 17:17:32 2015
|
Hi there, In the "Find" page, I changed the default of the "Show last" drop down box in the Entry Date section from the (unstated)
"All time" to "Day", and added back in an "All Time" option at the very bottom. This gives a default of searching the
last day, and one has to think and select the period of time to search back on. |
Re: Configure default time range in 'Find', posted by David Pilgram on Tue Jan 20 00:58:58 2015
|
It has just occurred to me that you may also have to check the non-English files, (./resorces/eloglang_xxxx) as this change introduces a new term "All
time" that would need translation into the other lexicons.
|
filter with or operation/TIME DURATION CALCULATION , posted by dev on Wed Jan 21 02:15:12 2015
|
1.I HAVE A ELOG BOOK WITH TWO ATTRIBUTE 'FROM' &'TO'. I WANT TO USE A FILTER WHICH WILL SEARCH FOR A VALUE IN BOTH ATTRIBUTE
.KINDLY HELP ME.
2. HOW TO CALCULATE THE TIME DURATION AUTOMATICALLY BASED ON TWO ATTRIBUTES 'START TIME' AND 'STOP TIME' . |
|
Re: filter with or operation/TIME DURATION CALCULATION , posted by Andreas Luedeke on Thu Jan 22 08:35:23 2015
|
dev
wrote:
1.I HAVE A ELOG BOOK WITH TWO ATTRIBUTE 'FROM' &'TO'. |
|
Re: Configure default time range in 'Find', posted by Stefan Ritt on Thu Jan 22 16:30:07 2015
|
I added a new optoin "Show last default = <days>", where one can pre-set the "Show last" drop-down box. I think this is a good
idea, so now people can configure their elog to a certain default in this parameter. Of course all settings in the Find page are AND'ed together, so
if one restricts the search to tha last week, but then looks for a date more in the past, the result will be zero by definition. The change is in the GIT |