ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
452
|
Tue Nov 18 23:19:57 2003 |
| Justin Dieters | enderak@yahoo.com | Comment | Linux | 2.3.9 | Update request for Admin Guide |
Heya, I've been using elog for a year or so, with a proxy through Apache,
but recently I've ran into some trouble with my Apache config, where
spammers were using my incorrectly configured proxy to send spam.
I have
some requests for the Administrator's Guide: "Running elogd under Apache".
I'm hoping a few little notes will save others the trouble I've gone
through. Neither of these are any fault of elog's or Apache's, but of my own
ignorance. (I am using elog 2.3.9, and Apache 2.something, if that matters)
1) When doing "ProxyPass ..." when setting up elog under Apache, do NOT put
"ProxyRequests On". This is not needed, if it is enabled and not set up
correctly, it allows spammers to send spam via Apache's proxy. More
information on this is here: http://www.apacheweek.com/issues/03-07-25,
about halfway down the page, under "Spammers use open Apache proxies"
Even though it doesn't mention ProxyRequests in the guide, I think there
should be a little side note mentioning that "ProxyRequests On" is NOT
needed, because I put it in, thinking it was - I am probably not the only one.
2) I have found that mod_proxy_http.c must be loaded in addition to
mod_proxy.c and mod_alias.c for the proxy to work, otherwise I get a 403
error. I think this should be mentioned as well. |
1539
|
Sat Dec 3 23:32:13 2005 |
| Jesse Wodin | jwodin@stanford.edu | Question | Linux | 2.6.0 | Upgrade from 2.3.8 to 2.6.0 logbook problem |
Hi, I'd like to upgrade from an old version of elog 2.3.8 to 2.6.0. I installed the new version, and it runs fine, but it doesn't seem to see my old logbooks (the path in the conf file is correct). Do I have to upgrade my logbooks somehow?
THanks!
Jesse |
2157
|
Tue Mar 6 16:59:13 2007 |
| T. Ribbrock | emgaron@gmx.net | Bug report | Linux | 2.6.4 | Upgrade to 2.6.4 broke quick search |
Hi!
I just went from 2.6.1 to 2.6.4 and since the upgrade, the quick search drop-down menus no longer work. I can select an attribute, but when I do so, I only get an empty page with the following message:
Attachment #0 of entry #0 not found
Please use your browser's back button to go back
When I do go back, the attribute I selected is still selected, but all entries are listed. With 2.6.1, this worked like a charm.
Any idea?
Thanks in advance,
Thomas |
2225
|
Mon Apr 30 20:52:51 2007 |
| Alan Stone | alstone@fnal.gov | Question | Linux | 2.6.5-1857 | Upgraded from 2.6.1 to 2.6.5, but cannot login now & top.html is not displayed |
We followed the simple download instructions. Our existing logbook entries
are still visible. Nothing was lost or touched in our /usr/local/elog directory.
Is there some step we missed?
Alan |
1537
|
Fri Dec 2 11:46:11 2005 |
| Rob de Bruin | rdbruin@zernike.nl | Request | Linux | 2.5.6.1 | Upgrading from ELOG V2.5.6-1 to ELOG V2.5.9 steps |
Hello,
Were still running (stable) Elog version V2.5.6-1.
We whant to upgrade to the latest version, can i just install the latest version over my older version??
I wil backup etc. offcourse.
Are there things i'll have to be alert to?
Can someone give me a link to a document?
Best regards Rob de Bruin |
67060
|
Mon May 2 22:39:23 2011 |
| Maureen Kular | maureen_kular@envirofuels.com | Other | Windows | 2.6.0 | Upgrading to 2.9 |
I am in the process of upgrading from 2.6.0 to 2.9.0. I am installing it on a windows 2008 r2 server which is 64 bit. I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0. Is there anything I need to know about the installation other than just run the exe file? So far I have run the exe file and installed the software, the service is running, however I cannot get into the application. I do not have IIS installed, it does mention it in the installation documentation, is this a requirement? Any hints or ideas at this point would be appreciated. I am close I just need that last tweek. Thanks |
67061
|
Mon May 2 22:39:24 2011 |
| Maureen Kular | maureen_kular@envirofuels.com | Other | Windows | 2.6.0 | Upgrading to 2.9 |
I am in the process of upgrading from 2.6.0 to 2.9.0. I am installing it on a windows 2008 r2 server which is 64 bit. I am having a few issues and am just wondering if Windows 2008 R2 is support with version 2.9.0. Is there anything I need to know about the installation other than just run the exe file? So far I have run the exe file and installed the software, the service is running, however I cannot get into the application. I do not have IIS installed, it does mention it in the installation documentation, is this a requirement? Any hints or ideas at this point would be appreciated. I am close I just need that last tweek. Thanks |
69238
|
Tue Oct 20 16:05:40 2020 |
| Bruno Schuler | bruno.schuler@empa.ch | Question | Windows | 3.1.4-2 | Upload attachment with py_elog |
Hello,
How can one add an attachment to a new or existing entry with py_elog?
E.g. if I want to upload an image.
Thanks for the help! |