Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 724 of 801  Not logged in ELOG logo
ID Date Icon Author Author Email Category OS ELOG Version Subject
  670   Thu Aug 12 23:55:00 2004 Reply Steve Jonessteve.jones@freescale.comQuestionAll2.5.4Re: Q: on 'FIND MENU commands =' <menu list>
> > Thank you.  I had added the "Move To" and this works at the log entry
> level (i.e., "Move
> > To <name>) but in the threaded view one does not get the enumerated list
> of logbooks.
> 
> You get the "Move To" button only after pressing "Select", otherwise it does
> not make sense. See attached screendump and config example.

Hmmm.  I like the little buttons with the pull-downs for selections. 
Unfortunately, I don't get that.  With a config of:

Find Menu commands = New, Find, Select, Config, Change password, Logout, Help, Admin
Menu commands = Back, New, Edit, Delete, Reply, Find, Move To, Copy To, Config, Help

my screen only shows the "toggle" and "delete" buttons.  Was there a recent rev
that allowed this to happen (I didn't see a comment on this).  

BTW, on a log entry screen, is the appropriate behavior for the "Move To" option
to show multiple "Move To" links (one for each logbook) or should there also be
pulldowns?  

Thanks
  669   Thu Aug 12 23:32:46 2004 Agree Steve Jonessteve.jones@freescale.comBug reportLinux2.5.4Re: too many <table> tags
> > Couldn't one include the extra <table> tag only when there is really more than
> > one attribute per line.  All other lines could then be aligned properly.
> 
> Sure one can do a lot of things if one has enough time and not tens of other
> requests on the wishlist which really concern some functionality and not just
> cosmetics.

Ouch!
And just to add insult to injury, the same <table> structure doesn't even look the
same between, say, IE6.0 and FireFox 0.9!!

Stefan, keep up the good work!
  668   Thu Aug 12 22:25:45 2004 Reply Stefan Rittstefan.ritt@psi.chQuestionOther2.5.4Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?
> Just for grins, what version of compiler are you using under Linux?

gcc 3.2.2 (from RedHat Linux 9.0)
  667   Thu Aug 12 22:24:04 2004 Reply Stefan Rittstefan.ritt@psi.chQuestionAll2.5.4Re: Q: on 'FIND MENU commands =' <menu list>
> Thank you.  I had added the "Move To" and this works at the log entry
level (i.e., "Move
> To <name>) but in the threaded view one does not get the enumerated list
of logbooks.

You get the "Move To" button only after pressing "Select", otherwise it does
not make sense. See attached screendump and config example.
Attachment 1: select.gif
select.gif
Attachment 2: elogd.cfg
[global]
port = 8080
password file = passwd
Self register = 1
Suppress email to users = 1

[demo1]
Theme = default
Comment = General linux tips&nbsp;tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type
Find menu commands = New, Find, Select, CSV Import, Config, Admin, Change password, Logout, Help
Menu commands = Back, New, Edit, Delete, Reply, Find, Config, Logout, Move to, Copy to, Help

[demo2]
Theme = default
Comment = General linux tips&nbsp;tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type
  666   Thu Aug 12 22:18:56 2004 Agree Steve Jonessteve.jones@freescale.comQuestionOther2.5.4Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?
> > I'm not sure if this is a configuration problem or a bug, but running
> > v2.5.4subver1.413, elogd runs as user ROOT (UID0) even though the following
> > is in the elogd.cfd file:
> > 
> > Usr = nobody
> > Grp = essadm
> > 
> > All other directives added to the cfg file work, so I know eLog is reading
> > the cfg file.  
> > 
> > The elogd binary *is not* setuid 0.
> 
> I could not reproduce your problem with the current version (Revision 1.460)
> under Linux. I guess you made sure that user "nobody" and group "essadm" exist.
> Try to run elogd interactively, if you see any error message (without "-D"
> flag). In the most recent version (1.460), I added some more debugging code
> which tells you if elogd successfully fell back to another user, if you use the
> "-v" (verbose) flag.
> 
> If all that does not help, I guess it's some peculiarity of Solaris. Maybe
> someone else using Solaris has some idea. All elogd does is a call to 
> 
> setuser("<user>");
> 
> I see no reason why this should not work on Solaris.

Ok, just checking.  I will fiddle around with running it interactively and see what
I get, plus I'll have a look at the setuser function under Solaris.

Just for grins, what version of compiler are you using under Linux?

Thanks again!
  665   Thu Aug 12 22:17:01 2004 Agree Steve Jonessteve.jones@freescale.comQuestionAll2.5.4Re: Q: on 'FIND MENU commands =' <menu list>
> > The help text on the website says the following:
> > 
> > "The command Select can be used to select multiple messages for deletion of
> > moving to other logbooks."
> > 
> > This is not clear but was the intent to indicate that SELECT can be used to
> > either select multiple log entries for deletion OR for moving to another
> > logbook?  If the latter, then this does not work if one adds the MOVE TO
> > menu item to the list.  If the former then the helptext is a little misleading.
> 
> SELECT can be used for deletion OR moving OR copying. To enable the copy and move
> commands, they have to be present in the "Menu commands" list, like
> 
> Menu commands = Back, New, Edit, Delete, Reply, Find, Config, Logout, Move to, Copy
> to, Help
> 
> I added an appropriate note to the documentation, sorry for the misleading descriptoin.

Thank you.  I had added the "Move To" and this works at the log entry level (i.e., "Move
To <name>) but in the threaded view one does not get the enumerated list of logbooks.

I'll play around with it a little more before re-posting.  When it didn't work as I
expected I read the docs and ran across the confusing text - so I stopped and asked!

Thanks again.
  664   Thu Aug 12 21:37:29 2004 Question Stefan Rittstefan.ritt@psi.chQuestionOther2.5.4Re: Q: On Solaris 8, eLog not honoring USR= and GRP= cfg file directives?
> I'm not sure if this is a configuration problem or a bug, but running
> v2.5.4subver1.413, elogd runs as user ROOT (UID0) even though the following
> is in the elogd.cfd file:
> 
> Usr = nobody
> Grp = essadm
> 
> All other directives added to the cfg file work, so I know eLog is reading
> the cfg file.  
> 
> The elogd binary *is not* setuid 0.

I could not reproduce your problem with the current version (Revision 1.460)
under Linux. I guess you made sure that user "nobody" and group "essadm" exist.
Try to run elogd interactively, if you see any error message (without "-D"
flag). In the most recent version (1.460), I added some more debugging code
which tells you if elogd successfully fell back to another user, if you use the
"-v" (verbose) flag.

If all that does not help, I guess it's some peculiarity of Solaris. Maybe
someone else using Solaris has some idea. All elogd does is a call to 

setuser("<user>");

I see no reason why this should not work on Solaris.
  663   Thu Aug 12 21:10:29 2004 Reply Stefan Rittstefan.ritt@psi.chQuestionAll2.5.4Re: Q: on 'FIND MENU commands =' <menu list>
> The help text on the website says the following:
> 
> "The command Select can be used to select multiple messages for deletion of
> moving to other logbooks."
> 
> This is not clear but was the intent to indicate that SELECT can be used to
> either select multiple log entries for deletion OR for moving to another
> logbook?  If the latter, then this does not work if one adds the MOVE TO
> menu item to the list.  If the former then the helptext is a little misleading.

SELECT can be used for deletion OR moving OR copying. To enable the copy and move
commands, they have to be present in the "Menu commands" list, like

Menu commands = Back, New, Edit, Delete, Reply, Find, Config, Logout, Move to, Copy
to, Help

I added an appropriate note to the documentation, sorry for the misleading descriptoin.
ELOG V3.1.5-3fb85fa6