The quick fix I found was to uncomment line 10 in the init.d file. (This was tested on a CentOS 6.8 AWS instance.)

. /etc/rc.d/init.d/functions

This will allow the status command to function properly.

Clean install:

[centos@ip-172-31-51-59 ~]$ service elogd status
status: invalid option: -p
 

After uncommenting line 10:

[centos@ip-172-31-51-59 ~]$ service elogd status
elogd (pid  11438) is running...

When you start elog it still won't show that the service started successfully (No 'OK'). If you go to stop the service, it will give you the proper 'OK' indicating it stopped successfully.

So to fix the missing 'OK' (or 'FAILED') we need to update the start section around line 51 as follows:

          touch /var/lock/subsys/elogd
        echo_success
        else
        echo_failure
        fi
        echo
        ;;
 

I've attached my modified init file which I believe corrects the above issues. I will say though that I'm not a programmer so I won't guarantee it's perfect. I haven't checked to see if CentOS 7 works with this modified version. Just checked it on a CentOS 7.2 AWS instance and it also appears to function correctly.

[root@oceana ~]# systemctl status elogd
● elogd.service - SYSV: ELOG is a weblog with integrated database
   Loaded: loaded (/etc/rc.d/init.d/elogd)
   Active: active (running) since Sun 2016-09-18 22:35:44 UTC; 7s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 2263 ExecStop=/etc/rc.d/init.d/elogd stop (code=exited, status=0/SUCCESS)
  Process: 2275 ExecStart=/etc/rc.d/init.d/elogd start (code=exited, status=0/SUCCESS)
 Main PID: 2277 (elogd)
   CGroup: /system.slice/elogd.service
           └─2277 /usr/local/sbin/elogd -D -c /usr/local/elog/elogd.cfg

Sep 18 22:35:44 oceana elogd[2277]: elogd 3.1.1 built Aug  4 20...0
Sep 18 22:35:44 oceana elogd[2277]: revision
Sep 18 22:35:44 oceana elogd[2277]: Falling back to default gro..."
Sep 18 22:35:44 oceana elogd[2277]: Falling back to default use..."
Sep 18 22:35:44 oceana elogd[2277]: CKeditor detected
Sep 18 22:35:44 oceana systemd[1]: Started SYSV: ELOG is a webl....
Sep 18 22:35:44 oceana elogd[2279]: Falling back to default gro..."
Sep 18 22:35:44 oceana elogd[2279]: Falling back to default use..."
Sep 18 22:35:44 oceana elogd[2277]: ImageMagick detected
Sep 18 22:35:44 oceana elogd[2277]: SSLServer listening on port....
Hint: Some lines were ellipsized, use -l to show in full.

The old SysV style commands ('service elogd start|stop|status') also function correctly.

[root@oceana ~]# service elogd stop
Stopping elogd (via systemctl):                            [  OK  ]
[root@oceana ~]# service elogd start
Starting elogd (via systemctl):                            [  OK  ]

hello

Is there a way to export logs from elog (for example after I have selected a filter) to txt or csv...

I found the "Download" attribute but this works for only one elog entry...

regards

If I edit an old entry, and do some mistake while editing, then there is currently no way to savely discard the changes.

The problem is that the entry will become a draft: if I close the window without saving, then the whole entry is gone: it will be converted into a draft entry. But the draft does contain my changes, it is not the originally saved entry!

The draft mechanism should keep a copy of the entry before I opened it in edit mode, and allow to go back to that copy. The edit form has currently the buttons "Submit", "Save", "Preview" and "Delete"; it should have in addition the button "Cancel", that just closes the edit window without saving the entry and even deleting the draft that was saved while the entry was modified. This should bring you back to the previous list view.

Is anyone out there in favour of this change?

Dear all,

there seems to be still lots of confusion with the new "draft modus" introduced in elog 3.1.2. Here is how it works:

If you edit an old or new entry, your changes are written to the elog server every few seconds. The entry in the elog database is marked as "draft". The idea behind that is that if your browser crashes or you navigate away from the elog page without saving your entry, the "draft" entry is sill in the elog database and can be recovered later. This is typically useful on some shift logbooks, where people keep the entry open for many hours and add things every few minutes. If they have a crash, they would loose a few hours of information.

The draft modus now has a few drawbacks:

• If you have some draft entries in your elog database, you don't see them until you hit "New" the next time. Then the system offers you to continue the open draft entries.
• Once you change an existing entry, you cannot go back to the version of that entry before you started to make modifications. The only option is to keep the current version or delete the whole entry. The old version of your entry in the database is overwritten every few seconds with the current contents of your edit text field.

To fix the first problem, I introduced a new flag "List drafts = 0|1". If this flag is 1, the draft entries are shown in the list view. The default value for this flag is 1, so normally you should see the draft entries in the database. You should refrain from editing these entries if you know that currently somebody else is working on them, otherwise you will overwrite each other's modifications. The modification is in the current git version of elog which is 3.1.2-6ec506b.

The scond drawback is harder to address. In order to go back to previous version, you would need a full version system (ala git), which is far beyond the scope of elog. I'm working on a partial fix by storing the contents on an entry inside the browser when you start editing an entry. You can then "cancel" your modifications by pasting back the original version from your browser. This works of course only if your browser does not crash or you do not navigate away from the elog page, in which case the original version will be lost.

If anybody has a strong opinion about these changes, please post them here.

Stefan

Somehow, I've missed to see that option :)

Thanks :)

Menu commands = List, New, Edit, Delete, Reply, Duplicate, Find, Config, Help

Hi Stefan,

PS: Here's a patch that works:

Most mail delivery systems have a maximum size for attachments. In the past, if an elog attachment was larger than this size, the email server refused to accept this email and no notification is sent. Now one can specify the maximum allowed email attachment size with

Max email attachment size = <n>

where <n> is the number of bytes. If an email attachment is larger than <n>, the attachment is not sent with the email notification, but rather replaced by a link to the elog server for that attachment. By clicking on the link in the email notification, a browser will then open and download the large attachment. For each each elog installation, the admin has to figure out what the maximum attachment size of their SMTP server is, and then put this number into the elogd.cfg setting  above. For most installations, the default of 10 MB will just work fine.

Stefan

Is it possible to include an option in the next release to have the Options list reference a text file of attributes rather than explicity listing the attributes in the Config file directly?

This would make it much easier to maintain a particular list that is referenced in several log books.