According to section "Syntax of elogd.cfg" of the "Administrator's Guide" Options <attribute> = <list> and  ROptions <attribute> = <list> should be the same. But there is a litle difference, because choosing an entry of the Options-pull-down menu causes a reload of the entry mask while choosing a ROption-radio-button the entry mask is not reloaded. This causes a problem using conditional attributes. The condition is only paid attention to in case of Options but not in case of ROptions. In my case I would like to use ROption, as it is faster to set a radio button than to choose an item in a pull-down menu, but I can't as I have also to use conditional attributes. Is there any solution?

Hello @all,

for a logbook I have also to set up a guest access. As I want to have a login page first opening the logbook,  I created a second logbook entry in the elog.cfg that points to the same subdir as the original logbook. The idea of this guest access is, that users who have no login rights can read selected items with selected attributes. Therefor I restricted the guest account with all available "Guest"-commands in the elog.cfg.

But this is not sufficient. Let's suppose I have an attribute called 'Accessibility' with options 'public' and 'private'. What I am searching for is a filter command for the list display, i.e. if an entry has the accessibility flag 'public', a guest sees this entry in the list and can access it. But if the entry has the accessibility flag private, the entry should not be displayed for guests but for users, that are logged in.

I read the administrator guide carefully, but I didn't found a command that provides for that. Does such a filtering command for the list exist? If not, is it possible to implement one?

Best regards,

Wolfgang Bayer

Is there a way to change the From address used when sending notifications 
from ELOG?   I was hoping there might be another attribute that would go 
along with the smtp host section.

Thanks,
Eric

I am using Windows Server 2003 R2 Standard Edition.  It is up-to-date and a full legal version installed from a geniune MS disk (to put that notion out the way).  I host a variety of webpages from this server through IIS6.0.

I am having an issue after installation of the ELOG software.  I grabbed the newest version from this website and ran the executable.  It installed fine (or appeared to do so).

Upon starting the ELOG server I receive the following error:

elogd.exe - Unable to Locate Component

This application has failed to start because MSVCR71.dll was not found.  Re-installing the application may fix this problem.

The file in question is part of an ancient Visual C distributeable.  This distributeable for my purposes no longer appears to be available (as I am on .net 3.5).  I am unsure of downloading the older runtime libraries from sites that are not microsoft's.  I am curious as to how I could go about making elog execute.  Any help would be appreciated.  Thank you!

 Thank ya much.  Worked perfectly.  For others with this issue, download that linked file to your c:\windows\system32\ folder. 

Running on windows server 2003.

Mysteriously from time to time i find ELOG has crashed and i must restart it.

Event log shows:

This has occurred twice so far in the month or less elog has been running.  The platform is stable and i have no other issues or negative events besides incorrect ASP calls here and there.  Thanks.

Faulting application elogd.exe, version 0.0.0.0, faulting module elogd.exe, version 0.0.0.0, fault address 0x0004b9c3.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Hi All,

I got into trouble setting up the automated email notification.

elog.cfg:

;Send automatic email notifications
SMTP host = mail.ihep.ac.cn
;SMTP host = 127.0.0.1

;Some SMTP server require username/passowrd authentication
;elogd -t <your password> for creating SMTP password
SMTP username = wux@ihep.ac.cn

SMTP Password = .JYEytMGvsHANeCIfQJXmscIt4NOtzJ8GbAnh3XH280
;SMTP Password = V3gxMzYxODAxMjAxNA==
;No Email notification
Suppress Email to users = 1

elogd -v:

GET /LEBT/?cmd=Forgot&login_name=wux HTTP/1.1
timezone: -28800, offset: 28800

Email from <wux@ihep.ac.cn> to wux@ihep.ac.cn, SMTP host mail.ihep.ac.cn:
220 ihep.ac.cn Anti-spam GT for Coremail System (ihep[20151015])
EHLO 10.1.44.220
250-mail
250-PIPELINING
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-coremail 1Uxr2xKj7kG0xkI17xGrUDI0s8FY2U3Uj8Cz28x1UUUUU7Ic2I0Y2Url11UVUCa0xDrUUUUj
250-STARTTLS
250 8BITMIME
AUTH LOGIN
username:
wux@ihep.ac.cnPassword:
.JYEytMGvsHANeCIfQJXmscIt4NOtzJ8GbAnh3XH280
535 Error: authentication failed

test with telnet:

[wux@logbook ~/elog]$ telnet mail.ihep.ac.cn 25
Trying 202.38.128.6...
Connected to mail.ihep.ac.cn.
Escape character is '^]'.
220 ihep.ac.cn Anti-spam GT for Coremail System (ihep[20151015])
EHLO 10.1.44.220
250-mail
250-PIPELINING
250-AUTH LOGIN PLAIN
250-AUTH=LOGIN PLAIN
250-coremail 1Uxr2xKj7kG0xkI17xGrUDI0s8FY2U3Uj8Cz28x1UUUUU7Ic2I0Y2Ur3T0__UCa0xDrUUUUj
250-STARTTLS
250 8BITMIME
AUTH LOGIN
334 dXNlcm5hbWU6
AUTH PLAIN
535 Error: authentication failed
Connection closed by foreign host.

Any advice and suggestions will be appreciate.

I use "SMTP username = <My_email_account>" without "@xxx" for my site. So you can try it like that. HTH