| ID |
Date |
Icon |
Author |
Author Email |
Category |
OS |
ELOG Version |
Subject |
|
67127
|
Mon Sep 26 08:13:10 2011 |
 | Olivier Callot | Olivier.Callot@cern.ch | Bug report | Linux | 2418 | Spurious characters in the searched string |
Hi,
We have a problem with the search command: Since our last upgrade to v2.9.0-2418 the searched string is pre- and postfixed with ASCII character expressed in % format, see the attached image. The searched string is prefied with %255E and postfxed by %2524 in the URL. And teh search fails. This affects searches from drop-down menus.
Thanks in advance. |
| Attachment 1: Capture.PNG
|
|
|
67129
|
Mon Sep 26 11:16:19 2011 |
 | Olivier Callot | Olivier.Callot@cern.ch | Bug report | Linux | 2418 | Re: Spurious characters in the searched string |
| Stefan Ritt wrote: |
|
| Olivier Callot wrote: |
|
Hi,
We have a problem with the search command: Since our last upgrade to v2.9.0-2418 the searched string is pre- and postfixed with ASCII character expressed in % format, see the attached image. The searched string is prefied with %255E and postfxed by %2524 in the URL. And teh search fails. This affects searches from drop-down menus.
Thanks in advance.
|
Strange. In this forum it works without extra characters. Just try it yourself. Do you have any strange configuration? Can you send me a minimal elogd.cfg which produces that error, maybe derived from the example elogd.cfg from the distribution.
- Stefan
|
Well, It may be our implementation of re-routing web requests: The requested string in elog is prefixed by %5E (^) and postfixed by %24 ($). But in my case, the '%' is again escaped as %25 so the prefix becomes %255E that is not understood by elog as being '^' ...
I will see with my experts in routing if this is something that can be fixed in our configuration. But when elog processes the input string, it should un-escape these characters and find back the '^', no? |
|
67131
|
Mon Sep 26 14:49:48 2011 |
| Olivier Callot | Olivier.Callot@cern.ch | Bug report | Linux | 2418 | Re: Spurious characters in the searched string |
| Olivier Callot wrote: |
|
| Stefan Ritt wrote: |
|
| Olivier Callot wrote: |
|
Hi,
We have a problem with the search command: Since our last upgrade to v2.9.0-2418 the searched string is pre- and postfixed with ASCII character expressed in % format, see the attached image. The searched string is prefied with %255E and postfxed by %2524 in the URL. And teh search fails. This affects searches from drop-down menus.
Thanks in advance.
|
Strange. In this forum it works without extra characters. Just try it yourself. Do you have any strange configuration? Can you send me a minimal elogd.cfg which produces that error, maybe derived from the example elogd.cfg from the distribution.
- Stefan
|
Well, It may be our implementation of re-routing web requests: The requested string in elog is prefixed by %5E (^) and postfixed by %24 ($). But in my case, the '%' is again escaped as %25 so the prefix becomes %255E that is not understood by elog as being '^' ...
I will see with my experts in routing if this is something that can be fixed in our configuration. But when elog processes the input string, it should un-escape these characters and find back the '^', no?
|
It turned out to be a setting of our re-routing of requests that re-escaped the '%'. Sorry for the noise. Cheers |
|
1397
|
Wed Aug 10 18:32:14 2005 |
 | Oleg Solovyanov | Oleg.Solovyanov@ihep.ru | Bug report | Linux | 2.6.0-b4 | Comment tooltip shows comment from other logbook |
I have several logbooks with Comment lines,
but the tooltip shows sometimes the correct comment,
sometimes the comment from other logbook...
I see the same behaviour also on this very page...
I use Mozilla 1.7.10.
Tried with Konqueror -> same problem. |
|
1506
|
Tue Nov 15 08:35:33 2005 |
| Oleg Solovyanov | Oleg.Solovyanov@ihep.ru | Bug report | Linux | 2.6.0-4 | page2?cmd=List does not show next page |
Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
|
1510
|
Wed Nov 16 15:24:53 2005 |
| Oleg Solovyanov | Oleg.Solovyanov@ihep.ru | Bug report | Linux | 2.6.0-4 | Re: page2?cmd=List does not show next page |
| Stefan Ritt wrote: |
| Oleg Solovyanov wrote: | Maybe I'm doing something wrong, but the following does not work on a Elog with multiple pages:
1. View message
2. Click List
3. Click Next or page number
4. Only the last page is shown
It looks like the URL pageN?cmd=List does not work, while pageN works.
Any hints?
Same behaviour can be seen also with Discussion forum on Elog site. |
I don't understand. I tried on the Discussion forum:
1. View message, for example http://midas.psi.ch/elogs/Forum/1506
2. Click List, which takes me to http://midas.psi.ch/elogs/Forum/
3. Click Next, which takes me to http://midas.psi.ch/elogs/Forum/page2
Then I really see page2, not the last page. So what do you do differently? |
Somehow in my logbooks List command would add cmd=List to the URL
And this does not work... |
|
1513
|
Thu Nov 17 23:40:10 2005 |
| Oleg Solovyanov | Oleg.Solovyanov@ihep.ru | Bug report | Linux | 2.6.0-4 | Re: page2?cmd=List does not show next page |
Yes, new version seems to fix this bug, but...
Now there's a new feature: sometimes it breaks the text message line into 2 when
displaying the summary page.
Maybe it happens only with Russian text  |
|
208
|
Fri Feb 7 22:26:13 2003 |
| Nick | Nick@nick.com | Question | | | Re: Lost features since upgrade to 2.3.0 |
> I revised the way links are placed into the summary table, so I could have
> lost some functionality (I did not try all config combinations since there
> are too many now). So I can fix your problem in two ways now: Either always
> have the first item in a list be a link, or have each item be the (same)
> link. What do you think is a better solution?
I think the first option is the better one, having the first columns data in
the list be linkable for example i am using this to store customer
configuration and the list needs to be in alphabetical order so it has to be
the first column but needs to be linkable :)
Would be nice if you can specify which columns data has links as a flag or
setting of some sorts, as opposed to either the first or all, but given a
choice I would want the first column to be the linkable one
My config looks like this
Display search = Customer Name, Account ID, Author, Date, #
I think the better option is first item (being the first column entries) all
have links to the logbook entries (which is how it was in the previous
version)
>
> > Problem 2 - no matter what i try in the config file i cannot get elogd to
> > use stylesheets ive tried specifying and even editing and removing the
> > default.css style sheet i downloaded but it just seems to ignore its
there.
I resolved this problem, many thanks for your help |