Re: URL causes elog crash, posted by Stefan Ritt on Wed Jan 4 13:38:29 2023
|
I added a user name validation in the current version.
Stefan
Germano |
Invalid Content-Length in header when running behind a load balancer, posted by Tamas Gal on Wed Jan 25 14:36:33 2023 
|
I am still struggling to get ELOG running behind a load balancer and hope to get some advice here. As already reported in https://elog.psi.ch/elogs/Forum/69542 I
observed an infinite loop of redirects when prompted to log in and using a non-empty password file. Without a password, the service worked as
expected. This was with version 3.1.3. |
|
Re: Invalid Content-Length in header when running behind a load balancer, posted by Tamas Gal on Wed Jan 25 19:51:29 2023
|
I put the ELOG service behind an Apache reverse proxy which is now sitting behind the HAProxy. It works like this, but it's just a workaround. I
am pretty sure that ELOG has problems to communicate with HAProxy correctly and it seems that Apache is more forgiving. So that the chain HAProxy ->
Apache -> ELOG and vice versa is working. |
|
*.cxx files missing in elog-3.1.5-1.tar.gz, posted by Frank Heyroth on Tue Jan 31 17:40:22 2023
|
I downloaded the last elog-3.1.5-1.tar.gz to install elog.
All *.cxx files are missing. |
3.1.5 - Mass edit bug + Wrong version, posted by Cryptage on Tue Feb 7 12:51:54 2023
|
Hi,
I've just installed the news 3.1.5 version and I have 2 problems.
I don't know if it works with older versions because I started with latest. |
|
Re: 3.1.5 - Mass edit bug + Wrong version, posted by Stefan Ritt on Tue Feb 7 16:21:37 2023
|
I checked and found that the bug which removed the main text was there since the beginning, but it's only triggered if you switch elog to French,
it doesn't happen in the English version. I changed a bit the text processing so now it should work also in the French version.
I also changed the version number which is shown at the bottom to 3.1.5. |
|
Re: 3.1.5 - Mass edit bug + Wrong version, posted by Cryptage on Tue Feb 7 17:31:20 2023
|
Thanks for your prompt help.
It looks good for text but I still have problem with "select" function (even in English).
|
|
Re: 3.1.5 - Mass edit bug + Wrong version, posted by Stefan Ritt on Tue Feb 7 20:45:31 2023
|
If it works with a simple edit, then why don't you use that one to edit individual values. I checked and version 3.1.4 had already the same problem,
so it was not newly introduced. I would have to invest a couple of hours to fix this issue correcly, which I simply don't have right now. |