Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 10:14:44 2017
|
If that is your command then it is obvious why no email is send:
you do set "Type=Type", but only for "Type=Problem(s)" and "Category=TDAQ" you would send an email.
Instead of writing "-h host" you should as well define the actual hostname, like "-h midas.psi.ch", likewise for all other |
|
Re: Email Notification (Not) Initiated by elog Client Utility, posted by Andreas Luedeke on Wed Jul 19 13:37:33 2017
|
Okay, I can confirm that this does not work. It is likely related to the disclaimer in the ELOG documentation (https://midas.psi.ch/elog/config.html#conditional)
Conditional attributes are usually only used for change items in the entry form.
I guess that the "Email" command never worked with conditional attributes. I use the "Email" command and conditional attributes |
|
Re: Password Protect Delete, posted by Andreas Luedeke on Fri Jul 21 08:54:03 2017
|
You can allow guests to create entries, but only registered users (Admins) to delete (or edit) entries:
Menu commands = List, New, Edit, Reply, Delete, Find, Config, Logout,
Help |
|
Re: Conditional attribute activation, posted by Andreas Luedeke on Mon Jul 24 14:33:51 2017
|
Yes, this is possible by using "Conditional Attributes". Have a look at the ELOG syntax help: https://midas.psi.ch/elog/config.html#conditional
To hide attributes on edit, you can use "Show Attributes Edit = ..." for the conditions; and you
only list the comment reason for the case where the value of the other attribute has the value "reserved". |
|
Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Sun Aug 20 14:55:18 2017
|
I don't know if that works. Why don't you just try?
Satyajit
Jena wrote:
Hi, |
|
Re: Sharing logbooks among "Top Groups", posted by Andreas Luedeke on Mon Aug 21 08:51:09 2017
|
Hi Satyajit,
I think you've just answered your own question. There is no magic switch - as far as I know - that would change that
behaviour.
Probably there are ways to achieve your desired behaviour (using mirror servers and synchronising the logbooks) but that would require
a large effort and would make your installation a lot more complicated. |
Problems with german_UTF8 language, posted by Andreas Luedeke on Mon Aug 21 11:22:09 2017 
|
Hi Stefan,
since recently (a few weeks) ELOG confuses the language translations.
Individual language strings are translated into garbage;
most other strings are fine.
Currently I see the string "please select" translated into "ressed" (see attached picture), |
Bug with Drafts and Language German, posted by Andreas Luedeke on Mon Aug 21 11:45:06 2017
|
Hi Stefan,
when one creates a new entry, and a draft entry exists for the logbook, then a menu appears (see attachment).
If one select "Neuen
Eintrag anlegen" then it should ignore the draft and create a new entry.
This feat is done by adding a "&ignore=1" to |