i cannot view images in elog, either as attachments or as icons,

safari 3.2.1 mac os x 10.5.6

Thank you

David

Hi

Tested this using the 2.6.1 version which comes packed with ubuntu-dapper and a 2.7.5 version I've compiled from source.

If I compile the 2.7.5 version from source and start it using

sudo /usr/local/sbin/elogd -c /usr/local/elog/elogd.cfg

config snippets below

---------------------------------

/usr/local/elog/elogd.cfg:

[global]
port = 8080
;url = http://solsikker.dmi.dk/elog/

[demo]
Theme = default
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type
------------------------------------

The icons show up !!

If I go through an apache proxy (config snippets below)

----------------------------------------

/usr/local/elog/elogd.cfg:

[global]
port = 8080
url = http://solsikker.dmi.dk/elog/

[demo]
Theme = default
Comment = General linux tips & tricks
Attributes = Author, Type, Category, Subject
Options Type = Routine, Software Installation, Problem Fixed, Configuration, Other
Options Category = General, Hardware, Software, Network, Other
Extendable Options = Category
Required Attributes = Author, Type
Page Title = ELOG - $subject
Reverse sort = 1
Quick filter = Date, Type

From apache conf

ProxyPass /elog/ http://solsikker.dmi.dk:8080/
ProxyPassReverse /elog/ http://solsikker.dmi.dk:8080/
<Proxy *>
        Order deny,allow
        allow from all
</Proxy>
-------------------------------------

The icons are missing !!!

The icons a showing up when using apache and the 2.6.1 elog version.

Best Regards

Rune

When I try to set

Protect Selection page = 1

in the config file elog crashes. Attached is my config file.

elog 2.7.5 built Apr  8 2009, 16:52:07 revision 130

Here's the issue. We use elog to develope products we need to be able to see all the thumbnail images in a

particular logbook. Our default view is to use the threaded view fully expanded in order to have all the thumbnails

be displayed for each product. This works fine but when we move one message to another logbook the thumbnails

end up getting broken and won't be displayed. The only way to fix this is to remove the image and re-upload the

picture after the message is moved. This is not a good option because we have hundrends of items that are

constantly being moved around from logbook to logbook. Any ideas?

Regards,

Mike

EDIT:

On further inspection it seems that when you are moving messages to another log book the image date filename

is re-written which of course breaks the html link to the image.  Is there anyway to supress this so that the filename

stays in tact when it's moved from one book to another. I don't see why the name of an attachment has to get changed

just because something is moved around.

Hi,

when i try to send a form after edit or create an entry i got this message : Connection closed by remote server

is there any idea

thanks

We are running elog across two sites and synchronizing every four hours on change only. There are about 100 entries per day of which most are just one line entries. However this is taking up to 9 mins and during the replication process the server gives us an "unavailable" error. We are using a T1 across the sites so bandwidth should not be an issue, I am confused as to why this takes so long.

The issue for us is not how long the sync takes, providing this was happening in the background, and doesnt lock out the server while the replication was taking place. We are operating under a 24 hour call center type environment so the server being available all the time is of paramount importance.

We use version 2.7.2 and I know there have been several changes made since this version. Would changing to the latest version have any impact on this?

Cheers,

Lance

Tried installing on Fedora 11 - failed dependency on libssl.so.6 I have libssl.so.8 installed. What do I need to do to install this package?

thanks,

nbc

I have v2.7.7 of elog running on a OSX system running 10.6 I configured and installed about a year ago.  It's a wonderful thing to have.

I acquired another system running 10.6 to dedicate to the elog app.  I downloaded 2.7.8  and performed the following steps:

extract tarball in the desired directory

run

tar -xzvf elog-x.x.x.tar

switch to the new elog-x.x.x directory edit Makefile and elogd.cfg files as needed

to create executables

run

make

to create directories & files

run

make install

When I try to execute elog as a daemon:

elogd -c ~vulcanstaff/ELOG-Workspace/elog/elogd.cfg -D

I get the following message:

-bash: elogd: command not found