Demo Discussion
Forum Config Examples Contributions Vulnerabilities
  Discussion forum about ELOG, Page 787 of 807  Not logged in ELOG logo
ID Date Icon Author Author Email Category OS ELOG Version Subjectdown
  67026   Tue Mar 15 17:37:19 2011 Blink soren poulsensoren.poulsen@cern.chCommentLinux2.9.0-2402Authentication error message

It is very good to have Kerberos authentication available. It is just the error message which is a bit cryptic.

If you enter your Kerberos password once, and later fail to authenticate with a wrong password, you get:

Kerberos error:
Decrypt integrity check failed.
Please check your Kerberos configuration

 

That is not really urgent!


Soren

 

  65697   Fri Jan 18 13:57:31 2008 Question Javier A. Ortizjavier.ortiz.78@gmail.comQuestionWindows Audit Trail?

First thanks for the great software! My only question would be how to implement audit trail feature. I know you can control who edits and that's great but in regulated environments like mine there's a requirement that the original record, the one edited, is not deleted or overwritten. If not possible right now the only thing I could think of is a mechanism, maybe possible thru configuration, that when the record is edited it is copied to an audit trail logbook (i.e. if logbook name is 'test' it's audit logbook will be named 'test-audit' which is read only) and have a link to the audit trail of the record (show only changes of the current record).

 

I'm more than aware that it's possible thru configuration but I'm short on that dept. Any help/idea?

 

Thanks in advance!

  67034   Thu Mar 24 17:23:37 2011 Cool Ryanryan.hoitt@gmail.comQuestionWindowsELOG V2.7Attributes for message workflow.

I am attempting to setup an ECR (Engineering Change Review/Request) process in ELOG.

I have a logbook setup so that an original request is submitted with a status of "Approval Pending"

Options ECR Status = Approval Pending, Approved / In Progress, Completed / In QA, Closed

Once the entry is made, it is reviewed by several people who reply to the original entry and update the approval fields, adding any comments as a reply :

Options OPS Approval = Approved, Denied
Options ENG Approval = Approved, Denied
Options Director Approval = Approved, Denied

Once the final approval is obtained, they reply to the thread and update the ECR Status field to "Approved / In Progress"

This goes through our QA process, and is finaly updated with "Closed"

 

The problem is, I would like to keep the historical data of when the status of these entries are made. For example, in the message thread, I can see that reply #4 changed the "Status" field to "Approved". However, I can not seem to find a way for this to work with quick filtering. The quick filter always filters on the first entry on a thread, and not the last.

The other option would be to change the status of the first entry, but that seems silly as I am using replys instead of edits.

Any ideas on how to implement this "Status" field into my workflow? I am even open to losing the historical "status" and beeing able to change all entries on the thread on reply. (i.e. Reply #4 changes "Status" to "Approved", and the system changed all entries in the thread to "Approved")

  2082   Sat Nov 18 11:19:14 2006 Entry ather khanather.khan@cpjeddah.comQuestion  Attributes according to users
Hi,
Is it possible to have certain attributtes available to certain user in one log boolk.
We have log book where the supervisor assign jobs to employees and we want only supervisor to have assign to attributes available and others only to view it.

thanks,
Ather
  66106   Thu Dec 11 03:13:31 2008 Warning Dennis Seitzdseitz@berkeley.eduBug reportMac OSX2.7.5Attribute value lost when adding to another extendable attribute

Here is an excerpt from my config file:

Type Last Edit = datetime
Preset Last Edit =$entry time
Locked Attributes = Last Edit
Subst on edit Last Edit = $date
Preset on Duplicate Last Edit = $date

I have another attribute called Part that I've made extendable.

When I duplicate an entry, Last Edit is updated with the current date correctly. However, as soon as I click the Add Part button next to my extendable Part attribute, and the page reloads to show the entry box for the Part field, the Last Entry field is replaced with a "-".

I have to submit and then re-edit the entry to get Last Edit to have a valid value again.

 

 *EDIT*:

I noticed that any time the page reloads while in the entry screen this happens, e.g. by selecting plain instead of html format.


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  1599   Wed Jan 18 02:22:44 2006 Question Adam BlandfordAdam.Blandford@dsto.defence.gov.auBug report 2.6.0Attribute substitution in email configuration
In the logbook config file I am not able to use attribute substitution in the <string> tag for
Use Email Heading = <string>
Attribute substitution does work however for
Use Email Subject = <string>
e.g.
Use Email Subject = ELOG $logbook entry; $Category: $Subject
will result in an email subject of: "ELOG Forum entry; Bug Report; Attribute substitution in email configuration"
Use Email Heading = A new entry has been submitted by $long_name on $remote_host on $date
will result in an email heading of: "A new entry has been submitted by $long_name on $remote_host on $date"

Not sure if this functionality is intended or is a bug. An comment/feedback/suggestion would be appreciated.
  68694   Mon Oct 23 11:47:50 2017 Question Stefano Lacaprarastefano.lacaprara@pd.infn.itQuestionLinuxV3.1.1-0767eb0Attribute option "+x" not searcheable
Dear experts,
   I have an elog with an attribute with fixed values, like this:

Attributes = Half
Options Half = +x, -x, both

It works fine, but I would like to find (or quick filter) all entries with Half=+x .

If I go to the search form, I can select +x from the dropdown menu for Half, but the search returns no result, even if I do have a number of entries with Half=+x. Likewise if I try to do the same with Quick filter.

I believe that this is due to the fact that the search uses regex, and "+" is reserved. I've tried to perform a search by entering manually and escaped "\+x", and it works as intended.

https://.../?mode=summary&reverse=0&reverse=1&npp=20&Half=%5E%5C%2Bx%24

However, since this attribute has a list of fixed values, it is not possible to entry manually something different "\+x" than what is defined in the config, that is "+x".

Is there a solution for this problem?

I would rather not change the attributes options (to, say, positive/negative), since that would mean changing manually a non negligible number of entries.

thanks,
  Stefano
  67900   Wed May 13 14:58:46 2015 Idea Francois CloutierFrancois@fcmail.caBug reportWindows3.1.0-3Attribute not updated
Good day,

I'm populating 2 fields based on the Option set in a third one.
It works, but for some reason, sometimes when I change the entry from one value to another (from 3/01/2015 to 26/03/2016) , the field "# Volume" stays at the first position 
(149) and doesn't get updated... I tried both with Chrome and IE.

Attributes = #Réception, #Galée, #Volume, #Parution, Partie, Parution, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, Correction, 
Commentaires, Contrôle final
List display = Edit, #Réception, #Volume, #Parution, #Galée, Parution, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, Correction, 
Contrôle 
final
Show attributes edit = #Réception, #Volume, Partie, #Galée, Parution, #Parution, Infographiste, Traitement, Réviseur, Révision, Contrôleur, Contrôle, Correcteur, 
Correction, 
Commentaires, Contrôle final

Menu commands = Select, edit, Move to, Delete
List menu commands = Select, New, Find
Move to = Archives

Fixed Attributes Edit = #Réception, #Parution
Locked Attributes = #Réception, #Volume, Partie,  #Parution

Preset #Réception = 1-#####

Preset Partie = 1
Preset Infographiste = -
Preset Réviseur = -
Preset Contrôleur = -
Preset Correcteur = -

Options Parution = 3/01/2015{1}, 10/01/2015{2}, 17/01/2015{3}, 24/01/2015{4}, 31/01/2015{5}, 7/02/2015{6}, 14/02/2015{7}, 21/02/2015{8}, 28/02/2015{9}, 7/03/2015{10}, 
14/03/2015{11}, 21/03/2015{12}, 28/03/2015{13}, 4/04/2015{14}, 11/04/2015{15}, 18/04/2015{16}, 25/04/2015{17}, 2/05/2015{18}, 9/05/2015{19}, 16/05/2015{20}, 23/05/2015{21}, 
30/05/2015{22}, 6/06/2015{23}, 13/06/2015{24}, 20/06/2015{25}, 27/06/2015{26}, 4/07/2015{27}, 11/07/2015{28}, 18/07/2015{29}, 25/07/2015{30}, 1/08/2015{31}, 8/08/2015{32}, 
15/08/2015{33}, 22/08/2015{34}, 29/08/2015{35}, 5/09/2015{36}, 12/09/2015{37}, 19/09/2015{38}, 26/09/2015{39}, 3/10/2015{40}, 10/10/2015{41}, 17/10/2015{42}, 24/10/2015{43}, 
31/10/2015{44}, 7/11/2015{45}, 14/11/2015{46}, 21/11/2015{47}, 28/11/2015{48}, 5/12/2015{49}, 12/12/2015{50}, 19/12/2015{51}, 26/12/2015{52}, 2/01/2016{53}, 9/01/2016{54}, 
16/01/2015{55}, 23/01/2016{56}, 30/01/2016{57}, 6/02/2016{58}, 13/02/2016{59}, 20/02/2016{60}, 27/02/2016{61}, 5/03/2016{62}, 12/03/2016{63}, 19/03/2016{64}, 26/03/2016{65}

Options Infographiste = -, ML, TS, AN, AC
Options Réviseur = -, MB, JC, SS, AR, LH, CA, NB, CL, TM, NR, MS
Options Contrôleur = -, MB, JC, SS, AR, LH, CA, NB, CL, TM, NR, MS
Options Correcteur = -, ML, TS, AN, AC

{1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51}Preset #Volume = 149
{53,54,55,56,57,58,59,60,61,62,63,64,65}Preset #Volume = 150

{1} Preset #Parution = 1
{2} Preset #Parution = 2
{3} Preset #Parution = 3
{4} Preset #Parution = 4
{5} Preset #Parution = 5
{6} Preset #Parution = 6
{7} Preset #Parution = 7
{8} Preset #Parution = 8
{9} Preset #Parution = 9
{10} Preset #Parution = 10
{11} Preset #Parution = 11
{12} Preset #Parution = 12
{13} Preset #Parution = 13
{14} Preset #Parution = 14
{15} Preset #Parution = 15
{16} Preset #Parution = 16
{17} Preset #Parution = 17
{18} Preset #Parution = 18
{19} Preset #Parution = 19
{20} Preset #Parution = 20
{21} Preset #Parution = 21
{22} Preset #Parution = 22
{23} Preset #Parution = 23
{24} Preset #Parution = 24
{25} Preset #Parution = 25
{26} Preset #Parution = 26
{27} Preset #Parution = 27
{28} Preset #Parution = 28
{29} Preset #Parution = 29
{30} Preset #Parution = 30
{31} Preset #Parution = 31
{32} Preset #Parution = 32
{33} Preset #Parution = 33
{34} Preset #Parution = 34
{35} Preset #Parution = 35
{36} Preset #Parution = 36
{37} Preset #Parution = 37
{38} Preset #Parution = 38
{39} Preset #Parution = 39
{40} Preset #Parution = 40
{41} Preset #Parution = 41
{42} Preset #Parution = 42
{43} Preset #Parution = 43
{44} Preset #Parution = 44
{45} Preset #Parution = 45
{46} Preset #Parution = 46
{47} Preset #Parution = 47
{48} Preset #Parution = 48
{49} Preset #Parution = 49
{50} Preset #Parution = 50
{51} Preset #Parution = 51
{52} Preset #Parution = 52
{53} Preset #Parution = 1
{54} Preset #Parution = 2
{55} Preset #Parution = 3
{56} Preset #Parution = 4
{57} Preset #Parution = 5
{58} Preset #Parution = 6
{59} Preset #Parution = 7
{60} Preset #Parution = 8
{61} Preset #Parution = 9
{62} Preset #Parution = 10
{63} Preset #Parution = 11
{64} Preset #Parution = 12
{65} Preset #Parution = 13
ELOG V3.1.5-3fb85fa6